Tensile Properties and Thermal Analysis of Chemimechanical Pulp-reinforced HDPE Composites

Abstract

The tensile and thermal properties of chemimechanical pulp/high-density polyethylene composites made using virgin high-density polyethylene as the matrix polymer, chemimechanical pulp as reinforcing fiber, and maleic anhydride grafted polyethylene as compatibilizing agent were examined by assessing the tensile properties and thermogravimetric analysis. The results indicated that 2% compatibilized composites and uncompatibilized composites exhibited the highest and the lowest tensile strength values, respectively, while the tensile modulus is partially independent of compatibilizing agent. Using maleic anhydride grafted polyethylene increases composites’ failure strain and tensile energy absorption as well. Based on the TGA analysis during the manufacturing of the composites, blending and injection temperatures should be less than 230°C to prevent the chemimechanical pulp from decomposition.

Keywords

tensile properties TGA chemimechanical pulp composites.

Get full access to this article

View all access options for this article.

References

Mathews, F.L. and Rawlings, R.D. ( 1994). Composite Materials: Engineering and Science, Chapman & Hall, London.

Kelly, A. and Zweben, C. (eds) (2000). Comprehensive Composite Materials, Polymer Matrix Composites, Vol. 2, pp. 999-1028, Elsevier/Pergamon , Amsterdam/Oxford.

Leaversuch, R.D. (2000). Wood-fiber Composites Build Promising Role in Extrusion, Modern Plastics, 77(12): 56-60.

Bigg, D.M. , Hiscock, D.F. , Peterson, J.R. and Bradbury, E.J. ( 1998). High Performance of Thermoplastic Matrix Composites , Journal of Thermoplastic Composite Materials, 1: 146-160.

John, Z.L. , Qinglin, W. and Harold, S. ( 2000). Chemical Coupling in Wood Fiber and Polymer Composites: A Review of Coupling Agents and Treatments, Wood and Fiber Science, 32(1): 88-104.

Maldas, D. and Kokta, B.V. ( 1990). Improving Adhesion of Wood Fiber with Polystyrene by the Chemical Treatment of Fiber with a Coupling Agent and the Influence on Mechanical Properties of Composite, Journal of Adhesion Science and Technology, 3(7): 529-539.

Sanadi, A.R. , CaulField, D.F. and Jacobson, R.E. ( 1997). Agro-fiber Thermoplastic Composites: Paper and Composites from Agro-based Resources, Chapter 12, pp. 377-401, CRC Press, Lewis Publishers, Boca Raton.

ASTM D638-90 (1991). Annual Book of ASTM Standards, Vol. 8.01, American Society of Testing and Materials, Philadelphia, PA.

Sain, M. , Suhara, P. , Law, S. and Bouilloux, A. ( 2005). Interface Modification and Mechanical Properties of Natural Fiber-polyolefin Composite Products, Journal of Reinforced Plastics and Composites, 24(2): 121-130.

10.

Zhang, Y. , Zhang, S.Y. and Choi, P. ( 2008). Effect of Wood Fiber Content on Tensile Properties of Wood Fiber Polyethylene Composites, Holz als Roh- und Werkstoff , 66: 267-274.

11.

Mengeloglu, F. and Kabakci, A. (2008). Determination of Thermal Properties and Morphology of Eucalyptus Wood Residue Filled High Density Polyethylene Composites, International Journal of Molecular Sciences, 9: 107-119.

12.

Lee, S.Y. , Kang, I.A. , Doh , G.H. , Yoon, H.G. , Park, B.D. and Wu , Q. (2008). Thermal and Mechanical Properties of Wood Flour/Talc-filled Polylactic Acid Composites: Effect of Filler Content and Coupling Treatment, Journal of Thermoplastic Composite Materials, 21: 209-223.