Mechanical and Rheological Properties of PA6/ABS Blends - With and Without Short Glass Fiber

Abstract

Polyamide-6 (PA6), acrylonitrile-butadiene-styrene (ABS), and their blends are an important class of engineering thermoplastics that are widely used for electronic and automotive industries. Many efforts have been made to improve the properties of both pure components and the blends. It was for this reason that the mechanical and rheological properties of PA6/ABS blend systems compatibilized by acrylonitrile-butadiene-styrene-maleic anhydride was studied. Short glass fiber was also used to enhance the compatibilized blends. The systems were prepared using a twin screw extruder. The specimens for mechanical test were molded using injection molding. The compatibilized blends showed higher mechanical properties compared to uncompatibilized blend. However, the impact strength reduced with the introduction of short glass fiber in the blends. The processing properties of the materials have been investigated using dynamic rheometer. The rheological measurements confirmed the increased in interaction between the blend components with the incorporation of compatibilizer. The incorporation of short glass fiber (SGF) into the compatibilized blends increased the storage and loss modulus as well as the viscosity of the blends.

Keywords

thermoplastics composites rheology PA6/ABS-SGF composites.

Get full access to this article

View all access options for this article.

References

Jang, S.P. and Kim, D.J. ( 2000). Thermal, Mechanical and Diffusional Properties of Nylon6/ABS Polymer Blends: Compatibilizer Effect, Polymer Engineering and Science, 40(7): 1635-1642.

Acierno, S. and Puyvelde, P.V. ( 2004). Rheological Behaviour of Polyamide 11 with Varying Initial Moisture Content, Journal of Applied Polymer Science, 97: 666-670.

Tjong, S.C. , Xu, S.A. , Li, R.K.Y. and Mai, Y.W. ( 2002). Short Glass Fibre-reinforced Polyamide 6,6 Composites Toughened with Maleated SEBS, Composites Science Technology , 62(15): 2017-2027.

Aoki, Y. and Watanabe, M. ( 1992). Morphological, Thermal and Rheological Properties of Nylon/ Acrylonitrile-butadiene-styrene, Polymer Engineering & Science, 32: 878-885.

Varma, D.S. and Dhar, V.K. ( 1988). Nylon 6/Poly(ethylene Terepthalate) Polymer Blends: Rheological Properties of Melts, Die Angewandte Makromolekulare Chemie , 169: 29-36.

Fu, S.-Y. , Lauke, B. , Li, R.K.Y. and Mai , Y.-W. (2005). Effects of PA6,6/PP Ratio on the Mechanical Properties of Short Glass Fiber Reinforced and Rubber-Toughened Polyamide 6,6/polypropylene blends, Composites Part B: Engineering, 37: 182-190.

Kudva, R.A. , Keskkula, H. and Paul, D.R. ( 1997). Compatibilization of Nylon 6/ABS Blends Using Glycidyl Methacrylate/Methyl methacrylate Copolymers, Polymer, 39: 2447-2460.

Sun, S.L. , Tan, Z.Y. , Xu, X.F. , Zhou, C. , Ao, Y.H. and Zhang, H.X. (2005). Toughening of Nylon-6 with Epoxy-functionalized Acrylonitrile-Butadiene-Styrene Copolymer, Journal of Polymer Science: Part B: Polymer Physics, 43: 2170-2180.

Kannan, K. and Misra, A. ( 1994). A Short Glass Fiber Reinforced PA6 and ABS Blends - Mechanical Properties and Morphology, International Polymer Processing , 9(2): 184-192.

10.

Feery, J.D. ( 1980). Viscoelastics Properties of Polymers, Wiley Press, New York.

11.

Bose, S. , Bhattacharyya, A.R. , Kodgie, P.V. , Misra, A. and Potschke, P. ( 2007). Rheology, Morphology and Crystallization Behaviour of Melt-mixed Blends of Polyamide 6 and Acrylonitrile-Butadiene-Styrene: Influence of Reactive Compatibilizer Premixed with Multiwall Carbon Nanotubes, Journal of Applied Polymer Science, 106: 3394-3408.

12.

Gribben, F. , McNally, G.M. , Murphy, W.R. and Clarke, A.H. (2005). The Effect of Compatibilization on the Rheology of Polyamide Blends. In: Proceedings of ANTEC 2005 Plastics: Annual Technical Conference, Vol. 3, Special Areas, pp. 2395-2399, Boston, USA.

13.

Shi, D. , Ke, Z. , Yang, J. , Gao, Y. , Wu, J. and Yin, J. (2002). Rheology and Morphology of Reactively Compatiblised PP/PA6 Blends, Macromolecules , 35: 8005-8012.

14.

Ma, H. , Tong, L. , Xu, Z. and Fang, Z. ( 2007). Clay Network in ABS-graft-MAH Nanocomposites: Rheology and Flammability, Polymer Degradation and Stability, 92: 1439-1445.

15.

Dreval, V.E. , Vasil, G.B. , Borisenkova, E.K. and Kulichikhin , V.G. (2006). Rheological and Mechanical Properties of ABS Plastics Prepared by Bulk Polymerization , Polymer Science, 48(3): 338-345.

16.

Khan, M.M.K. , Liang, R.F. , Gupta, R.K. and Agarwal, S. (2005). Rheological and Mechanical Properties of ABS/PC Blends, Korea-Australia Rheology Journal , 17(1): 1-7.

17.

Guschl, P.C. and Otaigbe, J.U. (2003). An Experimental Study of Morphology and Rheology of Ternary P-Glass-PS-LDPE Hybrids, Polymer Engineering and Science, 43(6): 1180-1196.

18.

Xiao, K.Q. , Zhang, L.C. and Zarudi, I. ( 2006). Mechanical and Rheolgical Properties of Carbon Nanotube-Reinforced Poleytehylene Composites, Composites Science and Technology , 67: 177-182.

19.

Lazano, K. , Yang, S. and Zeng, Q. ( 2004). Rheological Analysis of Vapor-Grown Carbon Nanofiber-Reinforced Polyethylene Composites, Journal of Applied Polymer Science , 93: 155-162.