An investigation on the dynamic behavior and thermal properties of MWCNTs/FRP laminate composites

Abstract

The synergetic effect of multi-walled carbon nanotubes (MWCNTs), carbon fiber (CF), and glass fiber (GF) on the static and dynamic mechanical and thermal properties of MWCNTs/epoxy (EP), carbon fiber reinforced polymer (CFRP), and glass fiber reinforced polymer (GFRP)/EP composites were studied. Impact, tensile, and flexural strengths and fatigue cycles of MWCNTs/EP, MWCNTs/CFRP/EP, MWCNTs/GFRP/EP were increased with an increase of MWCNTs content in the epoxy resins. The impact strength of MWCNTs/EP composite is increased dramatically from 4.8 J/M (neat resin) to 12.2 J/M (increased 154.1%) by adding 2.0 phr MWCNTs in the composites. The tensile strength of MWCNTs/CFRP/EP was enhanced from 580.1 MPa (CFRP/EP) to 781.4 MPa (increased 34.7%) by adding 0.5 phr MWCNTs. In addition, the flexural strength of MWCNTs/GFRP/EP was increased from 244.1 MPa (GFRP/EP) to 298.1 MPa (increased 22.16%) by adding 0.75 phr MWCNTs. The fatigue cycles of MWCNTs/GFRP/EP were increased from 959 cycles (GFRP/EP) to 3232 cycles (increased 237%) by adding 2.0 phr MWCNTs. The coefficient of thermal expansion (CTE) of MWCNTs/CFRP/EP was decreased significantly by adding 2.0 phr MWCNTs. The CTE of GFRP/EP had a value of 65.5 ppm/°C by adding 2.0 phr MWCNTs and was lower than that of CFRP/EP.

Keywords

Multi-walled carbon nanotubes fiber-reinforced polymer coefficient of thermal expansion fatigue life carbon fiber glass fiber

Get full access to this article

View all access options for this article.

References

Yuen S-M. , Ma C-CM , Wu H-H. and Kuan H-C. Preparation and thermal, electrical, and morphological properties of multiwalled carbon nanotube and epoxy composites. J Appl Polym Sci 2007; 103: 1272-1278.

Beguin F. and Ehrburger P. Special issue on carbon nanotubes. Carbon 2002; 40: 1619.

Garcia EJ , Wardle BL and Hart AJ Joining prepreg composite interfaces with aligned carbon nanotubes . Composites Part A 2008; 39: 1065-1070.

Schadler LS Polymer-based and polymer-filled nanocomposites. In: Ajayan PM , Schadler LS and Braun PV (eds) Nanocomposite science and technology. Weinheim: Wiley-VCH , 2003, pp.77-153.

Kojima Y. , Usuki A. , Kawasaki M. , Okada A. , Fukushima Y. , Kurauchi T. , et al. Mechanical properties of nylon 6-clay hybrid. J Mater Res 1993; 8: 1185-1189.

Gojny FH , Wichmann MHG , Fiedler B. and Schulte K. Influence of different carbon nanotubes on the mechanical properties of epoxy matrix composites: a comparative study. Compos Sci Technol 2005; 65: 2300-2313.

Zhu B. -K, Xie S.-H. , Xu Z-K. and Xu Y-Y. Preparation and properties of polyimide/multi-walled carbon nanotubes (MWCTs) nanocomposites. Compos Sci Technol 2006; 66: 548-554.

Ci L. and Bai J. The reinforcement role of carbon nanotubes in epoxy, composites with different matrix stiffness. Compos Sci Technol 2006; 66: 599-603.

Chowdhury FH , Hosur MV and Jeelani S. Studies on the flexural and thermomechanical properties of woven carbon/nanoclay-epoxy laminates . Mater Sci Eng A 2006; 421: 298-306.

10.

Yuen S-M. , Ma C-CM , Chiang C-L. , Chang J-A. , Huang S-W. , Chen S-C. , et al. Silane-modified MWCNTs/PMMA composites: preparation, electrical resistivity, thermal conductivity and thermal stability. Composites Part A 2007; 38: 2527-2535.

11.

Yuen S-M. , Ma C-CM , Chuang C-Y. , Hsiao Y-H. , Chiang C-L. and Yu A-D. Preparation, morphology, mechanical and electrical properties of TiO2 coated multiwalled carbon nanotube/epoxy composites. Composites Part A 2008; 39: 119-125.

12.

Yuen S. -M, Ma C-CM and Chiang C. -L. Silane grafted MWCNTs/polyimide composites: preparation, morphological and electrical properties. Compos Sci Technol 2008; 68: 2842-2848.

13.

Yuen S-M. , Ma C-CM , Lin Y-Y and Kuan H-C. Preparation, morphology and properties of acid and amine modified multiwalled carbon nanotube/polyimide composite. Compos Sci Technol 2007; 67: 2564-2573.

14.

Gojny FH , Wichmann MHG , Fiedler B. , Bauhofer W. and Schulte K. Influence of nano-modification on the mechanical and electrical properties of conventional fiber-reinforced composites. Composites Part A 2005; 36: 1525-1535.

15.

Zhu J. , Imam A. , Crane R. , Lozano K. , Khabashesku VN and Barrera EV Processing a glass fiber reinforced vinyl ester composite with nanotube enhancement of interlaminar shear strength. Compos Sci Technol 2007; 67: 1509-1517.

16.

Qiu J. , Zhang C. , Wang B. and Liang R. Carbon nanotube integrated multifunctional multiscale composites. Nanotechnology 2007; 18: 275708.

17.

Yokozeki T. , Iwahori Y. and Ishiwata S. Matrix cracking behaviors in carbon fiber/epoxy laminates filled with cup-stacked carbon nanotubes (CSCNTs). Composites Part A 2007; 38: 917-924.

18.

Bekyarova E. , Thostenson ET , Yu A. , Kim H. , Gao J. , Tang J. , et al. Multiscale carbon nanotube-carbon fiber reinforcement for advanced epoxy composites. Langmuir 2007; 23: 3970-3974.

19.

Bandow S. Radial, thermal expansion of purified multi-wall carbon nanotubes measured by X-ray diffraction. J Appl Phys 2 1997; 36: 1403-1405.

20.

Warrier A. , Godara A. , Rochez O. , Mezzo L. , Luizi F. , Gorbatikh L. , et al. The effect of adding carbon nanotubes to glass/epoxy composites in the fibre sizing and/ or the matrix. Composites Part A 2010; 41: 532-538.

21.

Chowdhury FH , Hosur MV and Jeelani S. Studies on the flexural and thermomechanical properties of woven carbon/nanoclay-epoxy laminates . Mater Sci Eng A 2006; 421: 298-306.

22.

Wang S. , Liang Z. , Gonnet P. , Liao Y. -H, Wang B. and Zhang C. Effect of nanotube functionalization on the coefficient of thermal expansion of nanocomposites. Adv Funct Mater 2007; 17: 87-92.