Licuri fibers: alternative reinforcement to polymeric composites

Abstract

This research is primarily based on the search for alternative natural reinforcements to polymeric composites. This study begins with a complete characterization of the licuri fiber as an alternative reinforcement to polymeric composites. It then investigates the development of a composite laminate made solely from licuri fibers to understand the behavior of the fiber when impregnated in thermosetting resin (orthophthalic unsaturated polyester resin). The composite was developed as a lamina (a sheet with a single reinforcement layer) and industrially manufactured. The fibers were studied to determine their physical, chemical, and mechanical properties. The mechanical properties of the lamina were determined by uniaxial tensile and three-point bending tests. Macroscopic and microscopic (SEM) studies of the fracture were carried out to determine the influence of fiber/matrix interfacial adhesion on the final composite for both loads.

Keywords

polymeric composites licuri fiber mechanical properties fracture

Get full access to this article

View all access options for this article.

References

Mander PW The strength of hybrid glass/carbon fibre composites: Part 1: Failure strain enhancement and failure mode. J Mater Sci 1981; 16(8): 2233-2245.

Fernando G. , Dickson RF , Adam T. , Reiter H. and Harris B. Fatigue behavior of hybrid composites: Part 1: Carbon/kevlar hybrids . J Mater Sci 1998; 23: 3732-3743.

Maron G. , Harel H. and Neumann S. Fatigue behavior and rate-dependent properties of aramid fiber/carbon fibre hybrid composites. Composites 1989; 20(6): 537-544.

Moe MT and Liao K. Effect of environmental aging on the mechanical properties of bamboo-glass fibre reinforced polymer matrix hybrid composites. Composites Part A 2002; 33: 43-52.

Aquino EMF , Sarmento LPS , Oliveira W. and Silva RV Moisture effect on degradation of jute/glass hydrid composites. J Reinf Plast Compos 2007; 27(1): 219-233.

Noblick LR The indigenous palms of the State of Bahia, Brazil, PhD thesis, University of Illinois, Chicago, 1991.

Bondar GO Licurizeiro e suas potencialidades na economia brasileira. Instituto Central de Fomento Econômico da Bahia 2: 18, 1938.

Bledzki AK and Gassan J. Composites reinforced with cellulose based fibers. Prog Polym Sci 1999; 24: 221-272. Índia: Elsevier Science.

Ufrn - Federal University of Rio Grande do Norte, Mechanical Engineering Department - Research base, 2008.

10.

Aquino EMF and Silva RV Curaua fiber: a new alternative to polymeric composites. J Reinf Plast Compos 2008; 27(1): 103-112.

11.

Edwards HGM , Farwell DW and Webster D. FT Raman microscopy of untreated natural plant fibres. Spectrochim Acta, Part A 1997; 53: 2383-2392.

12.

Khalil Hpsa , Ismail H. , Rozman HD and Ahmad MN The effect of acetylation on interfacial shear strength between plant fibres and various matrices. Eur Polym J 2001; 37(5): 1037-1045.