Red Balau saw dust was heat-treated at 180°C and 200°C for 1 h. Treated and untreated wood flour were compounded with LDPE at 9%, 20%, and 37% by weight and molded in an injection molding machine. Thermal and mechanical properties of the resultant composites were investigated as a function of filler loadings and treatment temperature. Thermogravimetric analysis revealed an increase in degradation peak temperature (Tp) of the heat-treated wood and composites. DSC revealed a decreasing trend in the degree of crystallinity (Xc) of the matrix when heat-treated wood was used as filler. On the other hand, untreated wood showed an increase in Xc with increasing wood content. Tensile modulus increased with heat treatment and filler loading. Furthermore, flexural strength and modulus were found to increase with filler loading.
DeviRRAliIMajiTK. Chemical modification of rubber wood with styrene in combination with a crosslinker: Effect on dimensional stability and strength property. Bioresour Technol2003; 88: 185–188.
2.
ClemonsC. Wood-plastic composites in the United States: The interfacing of two industries. Forest Prod J2002; 52(6): 10–18.
3.
WiemannMC. Characteristics and availability of commercially important woods. In: RossRJ (ed.) Wood handbook-wood as an engineering material. Forest Products Laboratory, General Technical Report FPL-GTR-190. Madison, WI: US Department of Agriculture, Forest Service, Forest Products Laboratory, 2010.
4.
KokaefeDPoncsakSBolukY. Effect of thermal treatment on the chemical composition and mechanical properties of birch and aspen. BioResources2008; 3(2): 517–537.
5.
AkyildizMHAtesSÖzdemirH. Technological and chemical properties of heat-treated Anatolian black pine wood. Afr J Biotechnol2009; 8(11): 2565–2572.
6.
HillCAS. Wood modification: Chemical, thermal and other processes. England: John Wiley & Sons, Press, 2006.
7.
KimBSChunBHLeeWIHwangBS. Effect of plasma treatment on the wood flour for wood flour/PP composites. J Thermoplast Compos Mater2009; 22: 21–28.
TjeerdsmaBFBoonstraMPizziATekelyPMilitzH. Characterization of thermally modified wood: Molecular reasons for wood performance improvement. Holz Roh Werkst1998; 56: 149–153.
10.
SanandiARCaulfieldDJacobsonOE. Agro-fiber thermoplastic composites. In: RowellRMYoungRARowellJK (eds) Paper and composites from agro-based resources. Boca Raton, FL: CRC Press, 1997.
11.
KabooraniAFaezipourMEbrahimiG. Feasibility of using heat treated wood in wood/thermoplastic composites. J Reinf Plast Compos2008; 27: 1689–1699.
12.
KabooraniA. Thermal properties of composites made of heat-treated wood and polypropylene. J Compos Mater2009; 43: 2599–2607.
13.
ArbelaizAFernandezBRamosJAMondragonI. Thermal and crystallization studies of short flax fibre reinforced polypropylene matrix composites: Effects of treatments. Thermochim Acta2006; 440: 111–121.
ASTM standard D-1106. Standard test method for acid-insoluble lignin in wood. West Conshohocken, PA: ASTM International, 1996.
16.
RowellRMPettersenRHanJSRowellJSTshabalaMA. Cell wall chemistry. In: RowellRM (ed.) Handbook of wood chemistry and wood composites. Boca Raton, FL: CRC Press, 2005, pp. 35–72.
17.
ASTM standard D-1105. Standard test method for preparation of extractive-free wood. West Conshohocken, PA: ASTM International, 1996.
18.
ASTM standard E-1755. Standard test for ash in biomass. West Conshohocken, PA: ASTM International, 2001.
19.
ASTM standard D-638. Standard test method for tensile properties of plastics. West Conshohocken, PA: ASTM International, 1999.
20.
ASTM standard D-790. Standard method for flexural properties of unreinforced and reinforced plastics and electrical insulating materials. West Conshohocken, PA: ASTM International, 2003.
21.
ZamanAAlenRKotilainenR. Thermochemical behavior of Scots Pine (Pinus sylvestris) and Silver Birch (Betula pendula) at 200°C–230°C. Wood Fiber Sci2000; 32(2): 138–143.
22.
AlenRKotilainenRZamanA. Thermochemical behavior of Norway Spruce (Picea abies) at 180°C to 225°C. Wood Sci Technol2002; 36: 163–171.
23.
KotalainenRAlenRArpiainenV. Changes in the chemical composition of Norway Spruce (Picea abies) at 160°C–260°C under air and nitrogen atmospheres. Paper Timber1999; 81(5): 384–388.
24.
BryneCENagleDC. Carbonization of wood for advanced materials applications. Carbon1997; 35(2): 259–266.
EstevesBMPereiraHM. Wood modification by heat treatment: A review. BioResources2008; 4(1): 370–404.
27.
RenneckarSZink-SharpAGWardTCGlasserWG. Compositional analysis of thermoplastic wood composites by TGA. J Appl Poylm Sci2004; 93(3): 1484–1492.
28.
XieLGruenebergTSteuernagelLZiegmannGMilitzH. Influence of particle concentration and type on flow, thermal, and mechanical properties of wood polypropylene composites. J Reinf Plast Compos2010; 29(13): 1940–1951.
29.
PouteauCDolePCathalaBAverousLBoquillonN. Antioxidant properties of lignin in polypropylene. Polym Degrad Stab2003; 81: 9–18.
30.
JosephPVJosephKThomasSPillaiCKSPrasadVSGroeninckxG. The thermal and crystallization studies of short sisal fibre reinforced polypropylene composites. Composites Part A2003; 34: 253–266.
31.
BlainRL. TN 48, Polymer heats of fusion. New Castle, DE: TA Instruments.
32.
IsmailYSRichardsonMOWOlleyRH. Optimizing impact properties of PP composites by control of cpherulitic morphology. J Appl Poylm Sci2001; 79: 1704–1715.
33.
NayakSKMohantyS. Sisal glass fiber reinforced PP hybrid composites: Effect of MAPP on the dynamic and thermal properties. J Reinf Plast Compos2010; 29(10): 1551–1568.
