Damage-tolerant design optimization of laminated composite structures using dispersion of ply angles by genetic algorithm

Abstract

This article aims to obtain damage-tolerant designs with minimum weight for a laminated composite structure using genetic algorithm. Damage tolerance due to impacts in a laminated composite structure is enhanced by dispersing the plies such that too many adjacent plies do not have the same angle. Weight of the structure is minimized and the Tsai–Wu failure criterion is considered for the safe design. Design variables considered are the number of plies and ply orientation. The influence of dispersed ply angles on the weight of the structure for a given loading conditions is studied by varying the angles in the range of 0°–45°, 0°–60° and 0°–90° at intervals of 5° and by using specific ply angles tailored to loading conditions. A comparison study is carried out between the conventional stacking sequence and the stacking sequence with dispersed ply angles for damage-tolerant weight minimization and some useful designs are obtained. Unconventional stacking sequence is more damage tolerant than the conventional stacking sequence is demonstrated by performing a finite element analysis under both tensile as well as compressive loading conditions. Moreover, a new mathematical function called the dispersion function is proposed to measure the dispersion of ply angles in a laminate. The approach for dispersing ply angles to achieve damage tolerance is especially suited for composite material design space which has multiple local minima.

Keywords

Optimum weight design dispersed ply angles damage tolerance genetic algorithm failure criteria dispersion function finite element methods matrix cracks delamination

Get full access to this article

View all access options for this article.

References

Qian

Bao

Takatera

. Fibre-reinforced polymer composite materials with high specific strength and excellent solid particle erosion resistance. Wear 2010; 268: 637–642.

Rafi

Nadjai

Ali

. Aspects of behaviour of CFRP reinforced concrete beams in bending. Construct Build Mater 2008; 22: 277–285.

Yang

Cheng

Yan

. Synthesis of Z_rO₂/ZrW₂O₈ composites with low thermal expansion. Compos Sci Technol 2007; 67: 1167–1171.

Adams

Singh

. The dynamic properties of fibre-reinforced polymers exposed to hot, wet conditions. Compos Sci Technol 1996; 56: 977–997.

Soutis

. Fibre reinforced composites in aircraft construction. Progr Aerosp Sci 2005; 41: 143–151.

Wilson

. Glass reinforced plastics for helicopter primary structures. J Sound Vib 1966; 3: 510–520.

Mouritz

Gellert

Burchill

. Review of advanced composite structures for naval ships and submarines. Compos Struct 2001; 53: 21–41.

Fuchs

ERH

Field

Roth

. Strategic materials selection in the automobile body: economic opportunities for polymer composite design. Compos Sci Technol 2008; 68: 1989–2002.

Al-Qureshi

. Automobile leaf springs from composite materials. J Mater Process Technol 2001; 118: 58–61.

10.

Kaufmann

Kroll

Odenwald

. Application-specific design of sports equipment from anisotropic fibre-reinforced plastics with stiffness related coupling effect. Procedia Eng 2010; 2: 2569–2574.

11.

Ozcan

Binici

Ozcebe

. Seismic strengthening of rectangular reinforced concrete columns using fibre reinforced polymers. Eng Struct 2010; 32: 964–973.

12.

Omkar

Senthilnath

Khandelwal

. Artificial Bee Colony (ABC) for multi-objective design optimization of composite structures. Appl Soft Comput 2011; 11: 489–499.

13.

Luh

Lin

. A binary particle swarm optimization for continuum structural topology optimization. Appl Soft Comput 2011; 11: 2833–2844.

14.

Park

Lee

Han

. Improved genetic algorithm for multidisciplinary optimization of composite laminates. Comput Struct 2008; 86: 1894–1903.

15.

Hatzigeorgiou

Beskos

. Minimum cost design of fibre-reinforced concrete-filled steel tubular columns. J Construct Steel Res 2005; 61: 167–182.

16.

Akbulut

Sonmez

. Optimum design of composite laminates for minimum thickness. Comput Struct 2008; 86: 1974–1982.

17.

Ghiasi

Pasini

Lessard

. Optimum stacking sequence design of composite materials-Part I: constant stiffness design. Compos Struct 2009; 90: 1–11.

18.

Narita

. Layerwise optimization for the maximum fundamental frequency of laminated composite plates. J Sound Vib 2003; 263: 1005–1016.

19.

Krack

Secanell

Mertiny

. Cost optimization of hybrid composite flywheels rotors for energy storage. Struct Multidiscip Optim 2010; 41: 779–795.

20.

Lopes

Seresta

Abdalla

. Stacking sequence dispersion and tow-placement for improved damage tolerance. In:49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Schaumburg, Illinois, AIAA, 2008–1735 2008.

21.

Grandt

Jr . Fundamentals of structural integrity: Damage tolerant design and non-destructive evaluation. New York: John Wiley & Sons, 2004, pp. 6–8,18.

22.

Harrison

. Damage tolerant design. New York: Pergamon Press Ltd, 1986, pp. 117–131.

23.

Tong

Mouritz

Bannister

. Introduction. 3D fibre reinforced polymer composites. Amsterdam: Elsevier Science Ltd, 2002, pp. 4–5.

24.

Irving

Mills

. Design, durability and integrity of composite aircraft structures. International Workshop on Damage Tolerance and Fatigue in Composites. India, 2010.

25.

Liu

Ekvall

. Material toughness and residual strength of damage tolerant aircraft structures. Damage tolerance in aircraft structures. Atlanta: American Society for Testing and Materials, 1971, pp. 99–100.

26.

Garg

. Delamination - A damage mode in composite structures. Eng Fract Mech 1988; 29: 557–584.

27.

Choi

Chang

. Impact damage resistance of graphite/epoxy laminated composites. Polym Eng Sci 1991; 31: 1294–1300.

28.

Fuoss

Straznicky

Poon

. Effects of stacking sequence on the impact resistance in composite laminates-Part 1: parametric study. Compos Struct 1998; 41: 67–77.

29.

Huang

Akkerman

. Analytical modeling of impact resistance and damage tolerance of laminated composite plates. AIAA Journal 2008; 46: 2760–2772.

30.

Chaperon

Jones

Heller

. A methodology for structural optimization with damage tolerance constraints. Eng Failure Anal 2000; 7: 281–300.

31.

Zang

Zhang

Hapeshi

. A review of nature-inspired algorithms. J Bionic Eng 2010; 7: S232–S237.

32.

Park

Hwang

Lee

. Stacking sequence design of composite laminates for maximum strength using genetic algorithms. Compos Struct 2001; 52: 217–231.

33.

Muelas

Pena

Robles

. Optimizing the design of composite panels using an improved genetic algorithm. Proceedings of the International Conference on Engineering Optimization, Brazil, 2008.

34.

Soremekun

Gurdal

Haftka

. Composite laminate design optimization by genetic algorithm with generalized elitist selection. Comput Struct 2001; 79: 131–143.

35.

Goldberg

. Genetic algorithms in search, optimization and machine learning. New Delhi: Doring Kindersley (India) Pvt. Ltd., Pearson Education, India, 2009, pp. 7–7.

36.

Narayana Naik

Krishna Murty

Gopalakrishnan

. A failure mechanism based failure theory for the design of composite laminae with effect of shear stresses. Compos Struct 2005; 69(2): 219–227.

37.

Gurdal

Haftka

Hajela

. Design and optimization of laminated composite materials. New York: John Wiley & Sons, Inc., 1999, pp.19–24.

38.

Jones

. Mechanics of composite materials, 2nd edn. New York: Taylor & Francis, 1999, pp. 116–117.