Rheological properties of ground rubber tire filled isotactic polypropylenes of different molecular weight characteristics

Abstract

Dynamic rheological properties of the thermoplastic composites containing ground rubber tire have been investigated. Isotactic polypropylenes of different molecular weights were used as thermoplastic polymer matrices. Ground rubber tire powder with a particle size of d = 0.1−0.4 mm was incorporated into the polypropylene by melt blending. The dynamic viscoelastic properties, such as storage and loss moduli, complex viscosity, and loss tangent of polypropylene/ground rubber tire composites were determined in function of ground rubber tire loading and compared with those of the parent polypropylene. The rheological properties of the composites showed shear thinning and power-law behavior. A significant improvement in the melt flowability of polypropylene/ground rubber tire composites was found to depend on the polypropylene molecular weight and the content of ground rubber tire. The higher was the ground rubber tire loading in the composites, the greater was the deviation from the Newtonian flow behavior. Results showed that the viscosity of polypropylene of high molecular weight significantly decreased with the addition of ground rubber tire up to 10 wt.%. The appearance of a minimum in the viscosity curve was traced to the formation of additional free volume in the polymer layers adjacent to the ground rubber tire particles. The dynamic rheological behavior of composites depended strongly on the degree of agglomeration of the ground rubber tire powder.

Keywords

Polypropylene ground rubber tire composite dynamic rheological properties

Get full access to this article

View all access options for this article.

References

Han

. Multiphase flow in polymer processing, New York: Academic Press, 1981.

Rajalingam

Sharpe

Baker

. Ground rubber tyre/thermoplastic composites: effect of different ground rubber tires. Rubb Chem Technol 1993; 66: 664−667–664−667.

Kim

Burford

. Study on powder utilization of waste tirer as a filler in rubber compounding. Rubb Chem Technol 1998; 71: 1028−1041–1028−1041.

Corley

Radusch

H-J

. Intensification of interfacial interaction in dynamic vulcanization. J Macromol Sci Phys 1998; 37: 265−273–265−273.

Kumar

Fuhrmann

Karger-Kocsis

. LDPE-based thermoplastic elastomers containing ground tire rubber with and without dynamic curing. Polym Degrad Stab 2002; 76: 137−144–137−144.

Lievana

Karger-Kocsis

. Use of ground tyre rubber (GTR) in thermoplastic polyolefin elastomer compositions. Prog Rubb Plast Recycl Technol 2004; 20: 1–1.

Prut

Kuznetsova

Novikov

. Thermoplastic vulcanizates based on polyolefines and rubber waste. Polym Mater Sci and Eng ACS 1997; 76: 331–331.

Trofimova

Novikov

Kompaniets

. Modification of crumb rubber. Polym Sci 2003; 45A: 537−544–537−544.

Kuznetsova

Zhorina

Prut

. Blends based on ground tire rubber. Polym Sci 2004; 46A: 151−159–151−159.

10.

Kuznetsova

Tchepel

Zhorina

. Static and dynamic vulcanizates containing ground tire rubber. Prog Rubb Plast Recycl Technol 2004; 20: 85−96–85−96.

11.

Kuznetsova

Prut

. The effect of vulcanization on the mechanical properties of ethylene-propylene-diene terpolymer blends with crumb rubber. Polym Sci 2005; 47A: 1245−1253–1245−1253.

12.

Trofimova

Kompaniets

Novikov

. Strain properties of blends based on isotactic polypropylene and crumb properties. Polym Sci 2005; 47B: 159−162–159−162.

13.

Dementienko

Kuznetsova

Tikhonov

. The effect vulcanization on the properties of polymer – elastomer blends containing crumb rubber. Polym Sci 2007; 49A: 1218−1225–1218−1225.

14.

Karger-Kocsis

. Polypropylene: structure, blends and composites, London: Chapman & Hall, 1995.

15.

Moore

Jr . Polypropylene handbook, Munich: Hanser, 1996.

16.

Karger-Kocsis

. Polypropylene: an A-Z reference, Dordrecht: Kluwer Academic, 1999.

17.

Prut E, Kuznetsova O, Chepel’ L, et al. Thermoplastic elastomers based on ground rubber tire. In: RAPRA TPE 2005. The Eighth International Conference on Thermoplastic Elastomers. 14–15 September, Berlin, Germany, Conference Proceedings, paper no 13.

18.

Prut

. Plastic flow instability and multiple fractures (grinding) of polymers: review. Polym Sci 1994; 36A: 493–497.

19.

Isayev

Khait

. Rubber recycling, Boca Raton: CRC Press, 2005.

20.

Ferry

. Viscoelastic properties of polymers, 3rd edn. New York: John Wiley & Sons, Inc, 1980.

21.

Payne

Whittaker

. Low strain dynamic properties of filled rubbers. Rubb Chem Technol 1971; 44: 440–478.

22.

Dumoulin

Farha

Utracki

. Rheological and mechanical properties of ternary blends of linear-low-density polyethylene/polypropylene/ethylene-propylene block polymers. Polym Eng Sci 1984; 24: 1319–1326.

23.

Han

. Rheology and processing of polymer materials, New York: Oxford University Press, 2007.

24.

Han

Chuang

. Criteria for the rheological compatibility of polymer blends. J Appl Polym Sci 1985; 30: 4431–4431.

25.

Han

Yang

. Rheological behavior of compatible polymer blends. I. Blends of poly(styrene-co-acrylonitrile) and poly(ε-caprolactone). J Appl Polym Sci 1987; 33: 1199–1199.

26.

Shumsky

Lipatov

Getmanchuk

. Viscoelasticity and morphology of poly(ethylene-co-vinyl acetate)/polyisobutylene blends. J Appl Polym Sci 2006; 102: 2700−2707–2700−2707.