The aim of this study was to develop bamboo fiber/polylactic acid/Cloisite 30B nanoclay-based laminated hybrid composites using the film-stacking method. The nanoclay was dispersed in polylactic acid using intermeshing twin-screw extruder and converted into polylactic acid–nanoclay films. Polylactic acid/nanoclay/bamboo fiber hybrid composites were fabricated using temperature-controlled compression molding machine. The dielectric properties were analyzed as a function of frequency (100 Hz–1 MHz) for temperatures in the range from 30°C to 140°C using standard impedance analyzer. Dielectric constant and dissipation factor decreased with increasing frequency for both virgin bamboo–polylactic acid composite and bamboo–polylactic acid nanocomposites. Significant improvement in impact strength of bamboo–polylactic acid nanocomposites was observed as compared to virgin bamboo–polylactic acid composites. The morphology of bamboo–polylactic acid nanocomposites was investigated using scanning electron microscope and transmission electron microscope.
JangJYJeongTKOhHJ. Thermal stability and flammability of coconut fiber reinforced poly(lactic acid) composites. Composites Part B2011; 43(5): 2434–2438.
2.
NampoothiriKMNairNRJohnRP. An overview of the recent developments in polylactide (PLA) research. Bioresour Technol2010; 101: 8493–8501.
3.
BastioliC. Global status of the production of biobased packaging materials. Starch2001; 53: 351–355.
4.
HudaMSDrzalLTMohantyAK. Effect of fiber surface-treatments on the properties of laminated biocomposites from poly(lactic acid) (PLA) and kenaf fibers. Compos Sci Technol2008; 68: 424–432.
5.
PetersenKNielsenPOlsenM. Physical and mechanical properties of biobased materials-starch, polylactate and polyhydroxybutyrate. Starch2001; 53: 356–361.
6.
RaySSOkamotoM. Polymer/layered silicate nanocomposites: a review from preparation to processing. Prog Polym Sci2003; 28: 1539–1641.
WuCS. Performance of an acrylic acid grafted polycaprolactone/starch composite: characterization and mechanical properties. J Appl Polym Sci2003; 89: 2888–2895.
16.
EdeerozeyAMMAkilHMAzharAB. Chemical modification of kenaf fibers. Mater Lett2007; 61: 2023–2025.
17.
PavlidouSPapaspyridesCD. A review on polymerlayered silicate nanocomposites. Prog Polym Sci2008; 33: 1119–1198.
18.
ReynaudEGauthierCPerezJ. Nanophases in polymers. Rev Metall1999; 96: 169–176.
19.
YangCCLeeYJYangJM. Direct methanol fuel cell (DMFC) based on PVA/MMT composite polymer membranes. J Power Sources2009; 188: 30–37.
20.
KumarVKumarR. Improved mechanical and thermal properties of bamboo-epoxy nanocomposites. Polym Compos2012; 33(3): 362–370.
21.
KumarVKumarR. Dielectric and mechanical properties of alkali and silane treated bamboo-epoxy nanocomposites. J Compos Mater. Epub ahead of print 15 February 2012. DOI: 10.1177/0021998311435831 jcm.sagepub.com.
22.
HuRLimJ-K. Fabrication and mechanical properties of completely biodegradable hemp reinforced PLA composites. J Compos Mater2007; 41: 1655–1669.
23.
HuRHSunMYLimJK. Moisture absorption, tensile strength and microstructure evolution of short jute fiber/polylactide composite in hygrothermal environment. Mater Des2010; 31: 3167–3173.
24.
AvellaMBuzarovskaAErricoME. Eco-challenges of bio-based polymer composites. Materials2009; 2: 911–925.
25.
FortunatiEArmentanoIIannoniA. Development and thermal behaviour of ternary PLA matrix composites. Polym Degrad Stab2010; 95: 2200–2206.
26.
YuTJie RenJLiS. Effect of fiber surface-treatments on the properties of poly(lactic acid)/ramie composites. Composites Part A2010; 41: 499–505.
27.
HongCKWoolRP. Low dielectric constant material from hollow fiber and plant oil. J Nat Fibers2004; 1: 83–92.
28.
ImaiTHiranoYHiraiH. Preparation and properties of epoxy-organically modified layered silicate nanocomposites. IEEE international symposium on electrical insulation (ISEI). 7–10 April 2002. Boston, MA. 379–383.
29.
SinghaSThomasMJ. Dielectric properties of epoxy-Al2O3 nanocomposite system for packaging applications. IEEE Trans Compon Packag Technol2010; 33: 373–385.
30.
RatnaDBeckerOKrishnamurthyR. Nanocomposites based on a combination of epoxy resin, hyperbranched epoxy and a layered silicate. Polymer2003; 44: 7449–7457.
KushwahaPKKumarR. Reinforcing effect of nanoclay in bamboo-reinforced thermosetting resin composites. Polym Plast Technol Eng2011; 50: 127–135.
33.
XuLLeeJ. Kinetic analysis and mechanical properties of nanoclay reinforced unsaturated polyester (UP) resins cured at low temperatures. Polym Eng Sci2005; 45: 496–509.
34.
ZerdaASLesserAJ. Intercalated clay nanocomposites: morphology, mechanics, and fracture behaviour. J Polym Sci Part B: Polym Phys2001; 39: 1137–1146.
35.
GuptaNLinTCShapiroM. Clay-epoxy nanocomposites: processing and properties. JOM2007; 59: 61–65.
36.
YasminAAbotJLDanielIM. Processing of clay/epoxy nanocomposites by shear mixing. Scr Mater2003; 49: 81–86.
37.
NayakSKMohantySSamalSK. Influence of short bamboo/glass fiber on the thermal, dynamic mechanical and rheological properties of polypropylene hybrid composites. Mater Sci Eng A2009; 523: 32–38.
38.
HuangXNetravaliX. Biodegradable green composites made using bamboo micro/nano-fibrils and chemically modified soy protein resin. Compos Sci Technol2009; 69: 1009–1015.
39.
BiswalMMohantySNayakSK. Mechanical, thermal and dynamic-mechanical behavior of banana fiber reinforced polypropylene nanocomposites. Polym Compos2011; 32: 1190–1201.
RosaMFChiouBMedeirosES. Effect of fiber treatments on tensile and thermal properties of starch/ethylene vinyl alcohol copolymers/coir biocomposites. Bioresour Technol2009; 100: 5196–5202.
