The influence of pine fiber treatments on the color and chemical changes of polyvinyl chloride-based wood plastic composites exposed to outside and xenon-arc accelerated weathering was investigated. The wood plastic composites were produced from pine fiber (untreated control, acetone extracted, and holocellulose (delignified)) and polyvinyl chloride. Different analytical tools (colorimetry, microscopy, infrared spectroscopy, and gel permeation chromatography) were employed for weathered wood plastic composites characterization. The study showed that longer exposure time in both outside and accelerated weathering regimes caused an increase in color change and lightness, cracking, higher oxidation but decrease in wood (lignin) content of the weathered wood plastic composites’ surface for all the wood fiber types. The polyvinyl chloride molecular weight decreased with increase in exposure time of the composites. From this study, delignified wood fiber-based wood plastic composites had less color (lightness) change and reduced surface cracking with lowest weathered surface oxidation. Furthermore, relationships between accelerated and outside weathered wood plastic composite surfaces were observed.
MatuanaLMKamdemDPZhangJ. Photo-ageing and stabilization of rigid PVC/wood-fiber composites. J Appl Polym Sci2001; 80(11): 1943–1950.
4.
FabiyiJSMcDonaldAG. Physical morphology and quantitative characterization of chemical changes of weathered PVC/Pine composites. J Polym Environ2010; 18(1): 57–64.
5.
DerbyshireHMillerER. The photodegradation of wood during solar irradiation. Holz Roh Werkst1981; 39: 341–350.
6.
EvansPDThayPDSchmalzlKJ. Degradation of wood surfaces during natural weathering: effects on lignin and cellulose and on the adhesion of acrylic latex primers. Wood Sci Technol1996; 30: 411–422.
7.
KiguchiMKataokaYMatsunagaH. Surface deterioration of wood-flour polypropylene composites by weathering trials. J Wood Sci2007; 53: 234–238.
8.
LiJZhouDZhaoD. The photo-degradation of PVC: part I-photo-degradation in air and nitrogen. Polym Degrad Stab1990; 30(3): 335–343.
9.
LiJZhouDZhaoD. The photo-degradation of PVC: part II – structural changes in PVC chains. Polym Degrad Stab1991; 31(1): 1–7.
10.
ChiantoreOTripodiSSarmoriaC. Mechanism and molecular weight model for thermal oxidation of linear ethylene–butene copolymer. Polym2001; 42(9): 3981–3987.
11.
MatuanaLMKamdemDP. Accelerated ultraviolet weathering of PVC/wood-flour composites. Polym Eng Sci2002; 42(8): 1657–1666.
12.
Technical Association of Pulp and Paper Industry (TAPPI T 204 om-88). Solvent extractives of wood and pulp, Atlanta, GA, 1996, pp.1–3.
13.
WiseLEMurphyMD’AddirecoAA. Chlorite holocellulose: its fractionation and bearing on summative wood analysis and on studies on the hemicellulose. Paper Trade J1946; 122(2): 35–43.
14.
FabiyiJSMcDonaldAGMcIlroyD. Wood modification effects on weathering of HDPE-based wood plastic composites. J Polym Environ2009; 17: 34–48.
15.
American society for testing and materials. ASTM D570-98. In:2002 Annual book of ASTM Standards, West Conshohocken, PA: ASTM International, 2002. 08.01.
16.
ASTM D790-02. In: 2002 Annual book of ASTM Standards, West Conshohocken, PA: ASTM International, 2003. 08.01.
17.
ASTM D 6662. Standard specification for polyolefin-based plastic lumber decking boards. Annual Book of ASTM Standards. Conshohocken, PA: ASTM International, 2003, 08(03), pp.1035–1049.
18.
ASTM D 1435. Standard practice for outdoor weathering of plastics. ASTM annual book. Conshohocken, PA: ASTM, 2003, 08(03), pp.308–312.
19.
FabiyiJSMcDonaldAGWolcottMP. Wood plastic composites weathering: visual appearance and chemical changes. Polym Degrad Stab2008; 93(8): 1405–1414.
20.
ASTM D 2244. Standard practice for calculation of color tolerances and color differences from instrumentally measured color coordinates. Annual Book of ASTM Standards. Conshohocken, PA: ASTM, 2001, 06(01), pp.240–249.
21.
ChandaMRoySK. Plastics technology handbook, 3rd ed. New York: Marcel Dekker Inc, 1998, pp. 195–195.
22.
Hon Hon and DN-S. Weathering and photochemistry of wood. In Hon DN-S and Shiraishi N (eds) Wood and cellulosic chemistry. 2nd ed. Marcel Dekker Inc. New York, 2001, pp.513–546.
KimHKimSKimH. Thermal properties of bio-flour-filled polyolefin composites with different compatibilizing agent type and content. Thermochimica Acta2006; 451: 181–188.
25.
HolmesGWKurthEF. Improvements in the determination of holocellulose. Tappi J1959; 42(10): 837–840.
26.
WinandyJERowellRMChemistry of wood strength. In: RowellRM (ed). Handbook of wood chemistry and wood composites, Boca Raton, FL: CRC Press, 2005, pp. 303–347.
27.
FaixOFourier transform infrared spectroscopy. In: LinSYDenceCW (eds). Methods in lignin chemistry, Berlin: Springer-Verlag, 1992, pp. 83–132.
28.
PandeyKK. A study of chemical structure of soft and hardwood and wood polymers by FTIR spectroscopy. J Appl Polym Sci1999; 71: 1969–1975.
29.
MayoDWSpectra of carbonyl compounds of all kinds (factors affecting carbonyl group frequencies). In: MayoDWMillerFAHannahRW (eds). Course notes on the interpretation of infrared and Raman spectra, Hoboken, NJ: John Wiley & Sons Inc, 2003, pp. 179–204.
30.
GaumetSGardetteJ-L. Photo-oxidation of poly(vinyl chloride): part 2-A comparative study of the carbonylated products in photo-chemical and thermal oxidations. Polym Degrad Stab1991; 33(1): 17–34.
31.
KweiK-PS. Photo-oxidation of poly(vinyl chloride). J Polym Sci Part A-1: Polym Chem1969; 7: 1075–1088.
32.
HoekstraHDSpoormakerJLBreentJ. UV-exposure of stabilized and non-stabilized HDPE films: physico-chemical characterization. Polym Degrad Stab1995; 49: 251–262.
33.
MacCallumJR. The occurrence of weak links in vinyl polymers undergoing thermal degradation. Makromolekulare Chemie1965; 83(1): 129–136.
34.
RabinovitchEBButlerRS. Comparison of QUV accelerated weathering to outdoor exposure for PVC compounds. J Vinyl Addit Technol1991; 13: 42–46.
