Non-destructive inspection of carbon-fibre-reinforced polymers using lock-in thermography

Abstract

Development in composite materials technology has led to wide applications of such promising materials. The detection and characterisation of the wide range of defects requires a number of specialised non-destructive methods. In this article, lock-in thermography was used to identify defects in carbon-fibre-reinforced polymer specimens. The effects of modulation frequency and incident angle were discussed. The amplitude and the phase images were compared. A multi-objective evolutionary algorithm was used to optimise the experimental frequency, time and other parameters of infrared NDT. The temperature difference between the non-destructive and the defect regions was used as evaluation function. The results show this method can provide theoretical parameters for engineering inspection.

Keywords

Lock-in thermography non-destructive carbon-fibre-reinforced polymers multi-objective evolutionary algorithm

Get full access to this article

View all access options for this article.

References

Bai

Wong

. Evaluation of defects in composite plates under convective environments using lock-in thermography. Meas Sci Technol 2001; 12: 142–150.

Ray

Hasan

Clegg

. Evaluation of defects in FRP composites by NDT techniques. J Reinf Plast Compos 2007; 26(12): 1187–1192.

D’Orazioa

Guaragnella

Leo

. Defect detection in aircraft composites by using a neural approach in the analysis of thermographic images. NDT&E Int 2005; 38: 665–673.

Meola

Carlomagno

Annicchinrico

. Detection of delamination in carbon-fibre-reinforced polymers with lock-in thermography. Proc IMechE Part G: J Aerospace Engineering 2010; 224(11): 1219–1227.

Sun

. Analysis of pulsed thermography methods for defect depth prediction. J Heat Transfer 2006; 128: 329–338.

Ibarra-Castanedo C. Quantative subsurface defect evaluation by pulsed phase thermography: depth retrieval with the phase. PhD Thesis, University Laval, 2005.

Wang

Liu

Dai

. Lock-in thermography to evaluation of destruction area and determination of depth. Proc SPIE 2007; 6723: 67231F–67231F.

Biju

Ganesan

Krishnamurthy

. Frequency optimization for eddy current thermography. NDT & E Int 2009; 42(5): 415–420.