The main objective of this study was to produce ultraviolet curable unsaturated polyester which was then reinforced by variable percentage of kenaf fibre. Unsaturated polyester resin based on palm oil was prepared by the interaction of monoglyceride monomer with maleic anhydride. Gel fraction of the composites increased as the percentage of kenaf fibre was increased up to 10% then decreased with higher kenaf percentage. The effect of kenaf loading on the dimensional stability of unsaturated polyester-reinforced composite showed a significant trend. Morphological study of the composites showed the evidence of the enhancement of compatibility between fibre and polymer.
MethaGMohantyAKMisraM. Effect of novel sizing on the mechanical and morphological characteristics of natural fiber reinforced unsaturated polyester resin based bio-composites. J Mater Sci2004; 39: 2961–2961.
2.
ManfrediLBRodríguezESWladyka-PrzyblakM. Thermal degradation and fire resistance of unsaturated polyester, modified acrylic resins and their composites with natural fibres. Polym Degrad Stabil2006; 91: 255–255.
3.
MathurVK. Composite materials from local resources. Constr Build Mater2006; 20: 470–470.
4.
Da SilvaRV. Compósito de resina poliuretano derivada de óleo de mamona e fibras vegetais, São Paulo: Universidade Federal de São Carlos, 2003.
5.
CallisterWD. Materials science and engineering, an introduction, 5th ed. Rio de Janeiro: LTC, 2002.
RajuluAVDeviLGRaoGB. Chemical resistance and tensile properties of epoxy/unsaturated polyester blend coated bamboo fibers. J Reinforc Plast Compos2003; 22: 1029–1029.
8.
BrahimSBCheikhRB. Influence of fiber orientation and volume fraction on the tensile properties of unidirectional Alfa polyester composite. Compos Sci Technol2007; 67: 140–140.
9.
RaoKMMRaoKM. Extraction and tensile properties of natural fibers: Vakka, date and bamboo. Compos Struct2007; 77: 288–288.
10.
SatyanarayanaKGGuimarãesJLWypychF. Studies on lignocellulosic fibers of Brazil. Part I: Source, production, morphology, properties and applications. Compos Appl Sci Manuf2007; 38: 1694–1694.
11.
LiYMaiYYeL. Sisal fibre and its composite: a review of recent developments. Compos Sci Technol2000; 60: 2037–2037.
12.
De FariasMAFarinaMZPezzinAPT. Unsaturated polyester composites reinforced with fiber and powder of peach palm: Mechanical characterization and water absorption profile. Mater Sci Eng C2009; 29: 510–510.
13.
Moreira SE, Farina MZ, Junior Alves C, et al. Morphology and thermal stability of treated pejibaye fiber and study of mechanical properties of fiber reinforced polyester composites, In: 6th International Symposium on Natural Polymers and Composites, Gramado, 2007.
14.
Farias MA, De Farina MZ, Pezzin APT, et al. Compósitos de resina poliéster insaturado reforçados com pó de pupunheira: caracterização mecânica. In: 12 Seminário de Iniciação Científica 2007, Joinville, UNIVILLE, 2007, p.1. Joinville: CD-R.
15.
De Farias MA, Farina MZ, Pezzin APT, et al. Compósitos de resina poliéster insaturado reforçados com fibra e pó de pupunheira: caracterização mecânica e perfil de absorção de água. In: 7 Congresso nacional de iniciação cientifica 2007, Sorocaba, UNISO, 2007, p.2. Sorocaba: CD-R.
16.
Grulke EA. Solubility parameter values. In: Brandrup J, Immergut EH and Grulke EA (eds) Polymer Handbook. 4th ed. 1999, P.VII/675.
17.
PerrinDDArmarigoWLFPerrinDF. Purification of laboratory chemicals, 2nd ed. New York, NY: Pergamon, 1980.
18.
MahmoudAHTayGSRozmanHD. A preliminary study on ultraviolet radiation-cured unsaturated polyester resin based on palm oil polymer-plastics technology and engineering. Polym Plast Technol Eng2011; 50: 573–573.
19.
RozmanDHFaizaMAKumarNR. A preliminary study on ultraviolet radiation cured bio-fibre composites from oil palm empty fruit bunch. Polym Plast Technol Eng2008; 47: 358–358.
20.
HabibiYEl-ZawawyWIbrahimMM. Processing and characterization of reinforced polyethylene composites made with lignocellulosic fibers from Egyptian agro-industrial residues. J Compos Sci Technol2008; 68: 1877–1877.
21.
ReddyNYangY. Biofibers from agricultural by products for industrial applications. J Trends Biotechnol2005; 23: 1–1.
22.
RayDRoutJ. Thermoset biocomposites. In: Mohanty AK, Misra M and Drzal LT (eds) Natural fibers, biopolymers, and biocomposites, Boca Raton, FL: CRC Press , Taylor and Francis group, 2005, pp. 291–345.
23.
Thiruchitrambalam M, Alavudeen A and Venkateshwaran N. Review on kenaf fiber composites. Rev Adv Mater Sci 2012; 32: 106.
24.
RozmanHDRozyantyARMusaL. Ultra-violet radiation-cured biofiber composites from kenaf: The effect of montmorillonite on the flexural and impact properties. J Wood Chem Technol2013; 30(2): 152–163.
25.
RozmanHDZuliahaniATayGS. Effects of rice husk (RH) particle size, glass fiber (GF) length, RH/GF ratio, and addition of coupling agent on the mechanical and physical properties of polypropylene-RH-GF hybrid composites. J Appl Polym Sci2013; 115: 3456–3462.
26.
TayGSMohd. ZaimJRozmanHD. Mechanical properties of polypropylene composite reinforced with oil palm empty fruit bunch pulp. J Appl Polym Sci2013; 116: 1867–1872.
27.
FelixJMGatenholmP. The nature of adhesion in composites of modified cellulose fibers and polypropylene. J Appl Polym Sci1991; 42: 609–609.
28.
ChenXGuoQMiY. Bamboo fiber-reinforced polypropylene composites: A study of the mechanical properties. J Appl Polym Sci1998; 69: 1891–1891.
29.
CautinhoFMBCostaTHSCarvalhoDL. Polypropylene-wood fiber composites: Effect of treatment and mixing conditions on mechanical properties. J Appl Polym Sci1997; 65: 1227–1227.
