A new CFRP anchor for preventing separation of externally bonded laminates from concrete

Abstract

Twelve identical concrete prisms were strengthened with Carbon Fibre-Reinforced Polymer (CFRP) laminate strips on two opposite faces and the laminates were anchored using the newly developed CFRP π-anchor. Prisms were tested in tension to investigate the effectiveness of the anchor to possibly delay delamination and/or to prevent the complete separation of the laminate from the prism. The salient feature of the anchor is its wide head to resist high interfacial shear stresses and its shanks that were inserted in predrilled holes to provide mechanical anchorage and to resist pull-out. The anchor doubled the tensile load-carrying capacity, effectively delayed delamination and prevented the CFRP laminate from full separation. Furthermore, the strengthened prisms experienced noticeable deformation.

Keywords

Carbon fibre laminates delamination strength

Get full access to this article

View all access options for this article.

References

Mostafa A and Razaqpur AG. Effectiveness of a new CFRP anchor in preventing delamination. In: Proceedings of the 3rd international conference on FRP in structures - APFIS 2012, Sapporo, Japan, 2–4 February 2012.

Mostafa A. A novel FRP anchor for preventing delamination in FRP strengthened concrete beams. PhD Thesis, McMaster University, Hamilton, Ontario, Canada, 2010.

Oehlers

Seracino

. Design of FRP and steel plated RC structures, UK: Elsevier, 2004.

Teng

Smith

Yao

. Intermediate crack-induced debonding in RC beams and slabs. Constr Build Mater 2003; 17: 447–462.

Smith

Teng

. FRP-strengthened RC beams I: review of debonding strength models. Eng Struct 2002; 24: 385–395.

Smith

Teng

. FRP strengthened RC beam. II: assessment of debonding strength models. Eng Struct 2002; 24: 397–417.

CSA S806-12. Design and construction of building components with fiber-reinforcement polymers, CSA Standard S806-12, Rexdale (Toronto), Ontario: CSA, 2012.

ACI

440.2R-08

. Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures, Farmington Hills, MI: American Concrete Institute, 2008.

Said

. Evaluating and proposing models of predicting IC debonding failure. J Compos Construct 2008; 12: 284–299.

10.

Federation Internationale du Beton (fib Bulletin 14). Design and use of externally bonded fiber reinforced polymer reinforcement (FRP EBR) for reinforced concrete structures. Technical Report, Bulletin No.14, 2001.

11.

Kalfat

Al-Mahaidi

Smith

. Anchorage devices used to improve the performance of concrete structures retrofitted with FRP composites: a-state-of-the-art review. J Compos Construct ASCE 2013; 17: 14–33.

12.

Elsayed

Ebead

Neale

. Studies on mechanically fastened fiber-reinforced polymer strengthening systems. ACI Struct J 2009; 106: 49–59.

13.

Martin

Lamanna

. Performance of mechanically fastened FRP strengthened concrete beams in flexure. J Compos Construct 2008; 12: 257–265.

14.

Lamanna

Bank

Scott

. Flexural strengthening of RC beams using fasteners and FRP strips. ACI Struct J 2001; 93: 368–376.

15.

Spadea

Bencardino

Swamy

. Structural behavior of composite RC beams with externally bonded CFRP. J Compos Construct ASCE 2008; 2: 132–137.

16.

Zhang

Smith

Kim

. Optimization of carbon and glass FRP anchor design. Compos Struct 2012; 32: 1–12.

17.

Zhang

Smith

. FRP-to-concrete joint assemblage anchored with multiple FRP anchors. Compos Struct 2012; 94: 403–414.

18.

Micelli

Rizzo

Galati

. Anchorage of composite laminates in RC flexural beams. Struct Concrete, fib 2010; 11: 117–126.

19.

Pham L, Jirsa JO and Bayrak O. Development of quality control tests for CFRP anchors. In: Proceedings of FRPRCS‐9, Sydney, Australia, 2009.

20.

Smith ST. FRP anchors: recent advances in research and understanding. In: Proceedings of the 2nd international conference on FRP in structures – APFIS 2009, Seoul, Korea, December 2009.

21.

Orton

Jirsa

Bayrak

. Design consideration of carbon fiber anchors. J Compos Construct, ASCE 2008; 12: 608–616.

22.

Ceroni

Pecce

Stjin Matthys

. Debonding strength and anchorage devices for reinforced concrete elements strengthened with FRP sheet. Composites Part B: Engineering 2008; 39: 429–441.

23.

Smith ST and Kim SJ. Shear strength and behaviour of FRP spike anchors in FRP-to-concrete joint assemblies. In: Proceedings (CD Rom) of advanced composite materials in bridges and structures, Winnipeg. Montreal: Canadian Society for Civil Engineering, 2008.

24.

Lam

Tang

. Strength of RC cantilever slabs bonded with GFRP strips. J Compos Construct ASCE 2001; 5: 221–227.

25.

Pham

Al-Mahaidi

. Prediction models for debonding failure loads of carbon fiber reinforced polymer retrofitted reinforced concrete beams. J Compos Construct, ASCE 2006; 10: 48–59.

26.

Smith

Teng

. Shear-bending interaction in debonding failures of FRP-plated RC beams. Adv Struct Eng 2003; 6: 183–199.

27.

Takahashi Y, Sato Y, Ueda T, et al. Flexural behaviour of RC beams with externally bonded carbon fiber laminate. In: Proceedings of the 3rd international symposium on non-metallic (FRP) reinforcement for concrete structures. Sapporo, Japan: Concrete Institute Publisher, vol. 1, 1997, pp. 327–334.

28.

Razaqpur AG and Mostafa A. A new CFRP anchor for preventing separation of externally bonded laminates from concrete. In: Proceedings of the 4th international conference on the on construction materials, Nagoya, Japan, 24–26 August 2009.

29.

Yan

Zhou

. Ultimate strength of reinforced concrete beams retrofitted with hybrid bonded fiber-reinforced polymer. ACI Struct J 2010; 107: 451–460.

30.

Razaqpur AG and Mostafa A. Carbon fibre reinforced polymer (CFRP) anchor for preventing separation of externally bonded laminates from concrete. Provisional Patent, approved on 8 April 2009, Serial No. 61/167,634, 2008.

31.

CSA Standard A23.3-04. Concrete design handbook, 3rd ed. Ottawa: Cement Association of Canada, 2004.

32.

Park R and Paulay T. Reinforced concrete structures. Wiley-Interscience, 1975.