Effect of particle size,coupling agent and DDGS additions on Paulownia wood polypropylene composites

Abstract

Studies aimed at improving the tensile, flexural, impact, thermal, and physical characteristics of wood–plastic composites composed of Paulownia wood flour derived from 36-month-old trees blended with polypropylene were conducted. Composites of 25% and 40% w/w of Paulownia wood were produced by twin-screw compounding and injection molding. Composites containing 0–10% by weight of maleated polypropylene were evaluated and an optimum maleated polypropylene concentration determined, i.e., 5%. The particle size distribution of Paulownia wood filler is shown to have an effect on the tensile and flexural properties of the composites. Novel combination composites of dried distiller’s grain with solubles mixed with Paulownia wood (up to 40% w/w) were produced and their properties evaluated. Depending on the composite tested, soaking composites for 872 h alters mechanical properties and causes weight gain.

Keywords

Wood particle reinforcement thermal analysis mechanical testing

Get full access to this article

View all access options for this article.

References

ReportsnReports. Wood-plastic composite & plastic lumber to 2015, http://www.reportsnreports.com/ reports/145422-wood-plastic-composite-plastic-lumber-to-2015.html (2012, accessed 8 May 2013).

Kalia S, Durfrense A, Cherian BM, et al. Cellulose-based bio- and nanocomposites; a review. Inter J Polym Sci 2011; Article ID 837875: 35.

Danesh

ZiaeiTabari

Hosseinpourpia

. Investigation of the morphological and thermal properties of waste newsprint/recycled polypropylene/nanoclay composites. Bioresources 2012; 7: 936–945.

Beg

MDH

Samahani

Mina

. Simultaneous effects of coupling agent and flame retardant on empty fruit bunch fiber/polypropylene composites. J Reinf Plast Compos 2013; 32: 1268–1284.

Sathishkumar

Navaneethakrishanan

Shankar

. Characterization of natural fiber and composites—a review. J Reinf Plast Compos 2013; 32: 1457–1476.

Clemons CM. Wood flour. In: Xanthos M (ed) Functional fillers for plastics. 2nd ed. Weinheim, Germany: Wiley-VCH Verlag GmBH & Co KGaA, 2010, pp.269–290.

LeVan-Green

Livingston

. Exploring the uses for small-diameter trees. J For Prod 2001; 51: 10–21.

Myers GC, Barbour RJ and AbuBakr SM. Small-diameter trees used for chemithermomechanical pulps. General Technical Report no. FPL-GTR-141, December 2003. Madison, WI: USDA Forest Service.

Stark NM and Berger MJ. Effect of particle size on properties of wood flour reinforced polypropylene composites. In: Proceedings of 4th international conference on woodfiber-plastic composites, Madison, WI, USA, 12–14 May 1997, pp.134–143. Wisconsin: Forest Products Society.

10.

Clemons

Stark

. Feasibility of using saltcedar as a filler in injection-molded polyethylene composites. Wood Fiber Sci 2009; 41: 2–12.

11.

English GJ and Ewing TW. Vision for bioenergy and biobased products in the United States. Report, Biomass Technical Advisory Committee, http://www.usbiomassboard. gov/pdfs/biovision_03_webkw.pdf (2002, accessed 14 May 2013).

12.

Joshee

Paulownia: a multipurpose tee for rapid lignocellulosic biomass production. In: Kole

Joshi

Shonnard

(eds). Handbook of bioenergy crop plants, Boca Raton: Taylor & Francis Inc., 2012, pp. 671–686.

13.

Chinese Academy of Forestry Staff. Paulownia in China: Cultivation and utilization, Singapore: Asian Network for Biological Sciences and International Development Research Centre, 1986, pp. 65–65.

14.

Plant Conservation Alliance’s Alien Plant Working Group. Princess tree, http://www.nps.gov/plants/ alien/fact/pato1.htm (2011, accessed 1 July 2013).

15.

Aryilmis

Kaymakci

. Fast growing biomass as reinforcing filler in thermoplastic composites: Paulownia elongata wood. Ind Crops Prod 2013; 43: 457–464.

16.

Zahedi

Tabarsa

Ashori

. A comparative study on some properties of wood plastic composites using canola stalk, Paulownia and nanoclay. J Appl Polym Sci 2012; 129: 1491–1498.

17.

Tisserat

Joshee

Mahapatra

. Physical and mechanical properties of extruded poly(lactic acid)-based Paulownia elongata biocomposites. Ind Crops Prod 2013; 44: 88–96.

18.

Tisserat

Reifschneider

Joshee

. Properties of high density polyethylene – Paulownia wood flour composites via injection molding. Bioresouces 2013; 8: 4440–4458.

19.

Keledi

Sudár

Burgstaller

. Tensile and impact properties of three-component/wood/elastomer composites. Express Polym Lett 2012; 6: 224–236.

20.

Bouafif

Koubaa

Perré

. Effects of fiber characteristics on the physical and mechanical properties of wood plastic composites. Compos Part A 2009; 40: 1975–1981.

21.

Ashori

Nourbakhsh

. Reinforced polypropylene composites: effects of chemical compositions and particle size. Bioresour Technol 2010; 101: 2515–2519.

22.

Liu

Rosentrater

. Distillers grains: Production, properties and utilization, Boca Raton: CRC Press, 2011, pp. 540–540.

23.

Wisner R. Estimated U.S. dried distillers grains with solubles (DDGS) production & use. Iowa State Extension Agricultural Marketing Resource Center, http://www.extension.iastate.edu/agdm/crops/outlook/dgsbalancesheet.pdf (2010, accessed 17 July 2013).

24.

Cheesbrough

Rosentrater

Visser

. Properties of distillers grains composites: a preliminary investigation. J Polym Environ 2008; 16: 40–50.

25.

Baboi M, Grewell D and Srinivasan G. Feasibility study of the use of DDGS plastic composites. In: ANTEC conference proceedings, Milwaukee, WI, USA, 4–8 May 2008, http://plasticsengineering.org/tech_library. http://plasticsengineering.org/tech_library (accessed 17 July 2013).

26.

Tisserat

Reifschneider

Harry O’Kuru

. Mechanical and thermal properties of high density polyethylene—dried distillers grains with soluble composites. Bioresources 2013; 8: 59–75.

27.

Reifschneider L, Tisserat B and Harry O’Kuru R. Mechanical properties of high density polyethylene-Pennycress press cake composites. In: ANTEC conference proceedings, Cincinnati, OH, USA, 21–25 April 2013, http://plasticsengineering.org/tech_library. http://plasticsengineering.org/tech_library (accessed 17 July 2013).

28.

Ehrenstein

. Polymeric materials, Munich, Germany: Carl Hanser Verlag, 2001, pp. 80–80.

29.

López

Gironès

Méndez

. Stone-ground wood pulp-reinforced polypropylene composites: water uptake and thermal properties. Bioresources 2012; 7: 5478–5487.

30.

Rodríquez-Llamazares

Zuñiga

Castaño

. Comparative study of maleated polypropylene as coupling agent for recycled low-density polyethylene/wood flour composites. J Appl Polym Sci 2011; 122: 1732–1741.

31.

Myers

Chahyadi

Gonzalez

. Wood flour and polypropylene or high density polyethylene composites: influence of maleated polypropylene concentration and extrusion temperature on properties. Intern J Polym Mater 1991; 15: 171–186.

32.

Thomason

Vlug

. Influence of fibre length and concentration on the properties of glass fibre-reinforced polypropylene: 4. Impact properties. Compos Part A 1997; 28: 277–288.

33.

Jin

. Effects of crystalline morphology on the impact behavior of polypropylene. Mater Des 2001; 22: 27–31.

34.

Zabihzadeh

. Flexural properties and orthotropic swelling behavior of bagasse/thermoplastic composites. BioResources 2010; 5: 650–660.

35.

Zabihzabeh

. Water uptake and flexural properties of natural filler/PP composites. BioResources 2010; 5: 316–323.

36.

Joseph

Rabello

Mattoso

LHC

. Environmental effects on the degradation behavior of sisal fiber reinforced polypropylene composites. Compos Sci Technol 2002; 62: 1357–1372.

37.

Kord

. Evaluation on the effect of wood flour and coupling agent content on the hygroscopic thickness swelling rate of polypropylene composites. BioResources 2011; 6: 3055–3065.

38.

Lopez

Sain

Cooper

. Performance of natural-fiber-plastic composites under stress for outdoor applications: effect of moisture, temperature, and ultraviolet light exposure. J Appl Polym Sci 2006; 99: 2570–2577.

39.

Kalia

Kaith

Kaur

. Pretreatment of natural fibers and their application as reinforcing material in polymer composites – a review. Polym Eng Sci 2009; 49: 1253–1272.

40.

Thwe

Liao

. Effects of environmental aging on the mechanical properties of bamboo—glass fiber reinforced polymer matrix hybrid composites. Compos Part A 2002; 33: 43–52.

41.

Avérous

Le Digabel

. Properties of biocomposites based on lignocelluosic fillers. Carb Polym 2006; 66: 480–493.

42.

Onwulata

Thomas

Cooke

. Effects of biomass in polyethylene or polylactic acid composites. J Biobased Mater Bioenergy 2009; 3: 1–9.

43.

Khalaf

. Effect of alkali lignin on heat of fusion, crystallinity and melting points of low density polyethylene (LDPE), medium density polyethylene (MDPE) and high density polyethylene (HDPE). J Thi-Qar Sci 2010; 2: 89–95.

44.

Lee

–

Wang

. Biodegradable polymers/bamboo fiber biocomposite with bio-based coupling agent. Compos Part A 2006; 37: 80–91.