Hybrid green nanocomposites of poly(lactic acid) reinforced with banana fibre and nanoclay

Abstract

Green nanocomposites of poly(lactic acid)/banana fibre/nanoclay were successfully prepared using melt-blending technique followed by injection moulding. Untreated and chemically modified banana fibres and organically modified nanoclay (Cloisite 30B) were used as reinforcing agent within the poly(lactic acid) matrix. The banana fibres were subjected to various chemical modifications such as mercerization, silane treatment, sodium lauryl sulphate treatment, permanganate treatment and combination of mercerization and silane treatment. The biocomposites and bionanocomposites were subjected to characterization tests i.e. mechanical properties, dynamic mechanical analysis, differential scanning calorimetry, thermogravimetric analysis, heat deflection temperature (HDT), morphological properties using scanning electron microscopy and transmission electron microscope and water-absorption studies to evaluate the effect of chemical modification of banana fibre and incorporation of nanoclay. Silane-treated fibre-reinforced poly(lactic acid) composites and its bionanocomposites displayed optimum tensile and flexural properties than that of virgin poly(lactic acid) resin, whereas the impact strength of composites showed a reverse order due to the brittle nature of matrix. Dynamic mechanical analysis result shows that the storage modulus of the bionanocomposites increases with respect to the virgin poly(lactic acid) and biocomposites. Differential scanning calorimetry results revealed that the glass transition was not significantly changed; however, the incorporation of both silane-treated fibre and C30B nanoclay enhanced the nucleation of poly(lactic acid) crystallites as well as increased the melting temperatures. The results of thermogravimetric analysis depicted that fibre modification and incorporation of nanoclay can improve the degradation temperature of the composites. Scanning electron micrographs demonstrated improper dispersion of untreated fibres and proper dispersion of treated fibres within the poly(lactic acid) matrix, thereby revealing the interfacial adhesion between the fibres and matrix. Additionally, the composites were subjected to water-absorption studies, which revealed that bionanocomposites exhibited better water resistance than biocomposites.

Keywords

Poly(lactic acid)green nanocomposites banana fibre melt blending nanoclay (C30B)chemical modification

Get full access to this article

View all access options for this article.

References

Koronis

Silva

Fontul

. Green composites: a review of adequate materials for automotive applications. Composites Part B 2013; 44: 120–127.

La Mantia

Morreale

. Green composites: a brief review. Composites Part A 2011; 42: 579–588.

Faruk

Bledzki

Fink

H-P

. Biocomposites reinforced with natural fibers: 2000–2010. Prog Polym Sci 2012; 37: 1552–1596.

Dittenber

GangaRao

HVS

. Critical review of recent publications on use of natural composites in infrastructure. Composites Part A 2012; 43: 1419–1429.

Ibrahim

Farag

Megahed

. Characteristics of starch-based biodegradable composites reinforced with date palm and flax fibers. Carbohydr Polym 2014; 101: 11–19.

Kaushik

Singh

Verma

. Green composite based on thermoplastic starch and steam exploded cellulose nanofibrils from wheat straw. Carbohydr Polym 2010; 82: 337–345.

Dean

. Polymer blends and composites from renewable resource. Prog Polym Sci 2006; 31: 576–602.

Huda

Drzal

Mohanty

. Effect of ﬁber surface-treatments on the properties of laminated biocomposites from poly (lactic acid) (PLA) and kenaf ﬁbers. Compos Sci Technol 2008; 68: 424–432.

Graupner

Mussig

. A comparison of the mechanical characteristics of kenaf and lyocell ﬁbre reinforced poly (lactic acid) (PLA) and poly (3-hydroxybutyrate) (PHB) composites. Composites Part A 2011; 42: 2010–2019.

10.

Lodha

Netravali

. Thermal and mechanical properties of environment-friendly ‘green’ plastics from stearic acid modified-soy protein isolate. Ind Crops Prod 2005; 21: 49–64.

11.

Rasal

Janorkar

Hirt

. Poly (lactic acid) modifications. Prog Polym Sci 2010; 35: 338–356.

12.

Wang

Cui

. Bulk and surface modification of polylactide. Anal Bional Chem 2005; 381: 547–556.

13.

Zenkiewicz

Rytlewski

. Compositional and chemical modification of polylactide. J Achieve Mater Manuf Eng 2010; 43: 192–198.

14.

Baghaei

Skrifvars

Berglin

. Manufacture and characterisation of thermoplastic composites made from PLA/hemp co-wrapped hybrid yarn prepregs. Composites Part A 2013; 50: 93–101.

15.

Sawpan

Pickering

Fernyhough

. Flexural properties of hemp fiber reinforced polylactide and unsaturated polyester composites. Composites Part A 2012; 43: 519–526.

16.

Porras

Maranon

. Development and characterization of a laminate composite material from polylactic acid (PLA) and woven bamboo fabric. Composites Part B 2012; 43: 2782–2788.

17.

Ibrahim

Dufresne

El-Zawawy

. Banana ﬁbers and microﬁbrils as lignocellulosic reinforcements in polymer composites. Carbohydr Polym 2010; 81: 811–819.

18.

R-H

Sun

M-Y

Lim

J-K

. Moisture absorption, tensile strength and microstructure evolution of short jute ﬁber/polylactide composite in hygrothermal environment. Mater Des 2010; 31: 3167–3173.

19.

Akil

Omar

Mazuki

AAM

. Kenaf ﬁber reinforced composites: a review. Mater Des 2011; 32: 4107–4121.

20.

Jang

Jeong

. Thermal stability and ﬂammability of coconut ﬁber reinforced poly (lactic acid) composites. Composites Part B 2012; 43: 2434–2438.

21.

Iwatake

Nogi

Yano

. Cellulose nanoﬁber-reinforced polylactic acid. Compos Sci Technol 2008; 68: 2103–2106.

22.

Elanthikkal

Unnikrishnan

Varghese

. Cellulose microﬁbres produced from banana plant wastes: isolation and characterization. Carbohydr Polym 2010; 80: 852–859.

23.

Kabir

Wang

Lau

. Chemical treatments on plant-based natural fiber reinforced polymer composites: an overview. Composites Part B 2012; 43: 2883–2892.

24.

Xie

Hill

CAS

Xiao

. Silane coupling agents used for natural ﬁber/polymer composites: a review. Composites Part A 2010; 41: 806–819.

25.

Tabil

Panigrahi

. Chemical treatments of natural fiber for use in natural fiber-reinforced composites: a review. J Polym Environ 2007; 15: 25–33.

26.

Oksman

Skrifvars

Selin

. Natural fibers as reinforcement in polylactic acid (PLA) composites. Compos Sci Technol 2003; 63: 1317–1324.

27.

Faludi

Dora

Renner

. Biocomposites from polylactic acid and lignocellulosic fibers: structure–property correlations. Carbohydr Polym 2013; 92: 1767–1775.

28.

Fukushima

Tabuani

Arena

. Effect of clay type and loading on thermal, mechanical properties and biodegradation of poly(lactic acid) nanocomposites. React Funct Polym 2013; 73: 540–549.

29.

Fernandez MJ, Fernandezand MD and Aranburu I. Poly (L-lactic acid)/organically modified vermiculite nanocomposites prepared by melt compounding: effect of clay modification on microstructure and thermal properties. Eur Polym J 2013; 49: 1257–1267.

30.

Cheng

K-C

C-B

Guo

. Thermal properties and flammability of polylactide nanocomposites with aluminum trihydrate and organoclay. Carbohydr Polym 2012; 87: 1119–1123.

31.

Wei

Bocchini

Camino

. Nanocomposites combustion peculiarities. A case history: Polylactide-clays. Eur Polym J 2013; 49: 932–939.

32.

Zaidi

Bruzaud

Kaci

. The effects of gamma irradiation on the morphology and properties of polylactide/Cloisite 30B nanocomposites. Polym Degrad Stab 2013; 98: 348–355.

33.

Yourdkhani M, Mousavand T, Chapleau N, et al. Thermal, oxygen barrier and mechanical properties of polylactide-organoclay nanocomposites. Compos Sci Technol 2013; 82: 47–53.

34.

Rhim

J-W

Hong

S-I

C-S

. Tensile, water vapor barrier and antimicrobial properties of PLA/nanoclay composite films. LWT – Food Sci Technol 2009; 42: 612–617.

35.

Zaidi

Kaci

Bruzaud

. Effect of natural weather on the structure and properties of polylactide/Cloisite 30B nanocomposites. Polym Degrad Stab 2010; 95: 1751–1758.

36.

Najafi

Heuzey

Carreau

. Polylactide (PLA)-clay nanocomposites prepared by melt compounding in the presence of a chain extender. Compos Sci Technol 2012; 72: 608–615.

37.

Okubo

Fujii

Thostenson

. Multi-scale hybrid biocomposites: processing and mechanical characterization of bamboo fiber reinforced PLA with microfibrillated cellulose. Composites Part A 2009; 40: 469–475.

38.

Biswal

Mohanty

Nayak

. Influence of organically modified nanoclay on the performance of pineapple leaf fiber-reinforced polypropylene nanocomposites. J Appl Polym Sci 2009; 114: 4091–4103.

39.

Kumar

Yakabu

Anandjiwala

. Effect of montmorillonite clay on flax fabric reinforced poly lactic acid composites with amphiphilic additives. Composites Part A 2010; 41: 1620–1627.

40.

Majeed

Jawaid

Hassan

. Potential materials for food packaging from nanoclay/natural fibers filled hybrid composites. Mater Des 2013; 46: 391–410.

41.

Zhong

Poloso

Hetzer

. Enhancement of wood/polyethylene composites via compatibilization and incorporation of organoclay particles. Polym Eng Sci 2007; 47: 797–803.

42.

Kumar Y, Sharma NK and Kumar R. Dielectric, mechanical, and thermal properties of bamboo–polylactic acid bionanocomposites. J Reinf Plast Compos 2013; 32: 42–51.

43.

Jandas

Mohanty

Nayak

. Surface treated banana fiber reinforced poly (lactic acid) nanocomposites for disposable applications. J Cleaner Prod 2013; 52: 392–401.

44.

Kaur

Kishore

. Montmorillonite: an efficient heterogeneous and green catalyst for organic synthesis. J Chem Pharm Res 2012; 4: 991–1015.

45.

Ren

. Effect of ﬁber surface-treatments on the properties of poly(lactic acid)/ramie composites. Composites Part A 2010; 41: 499–505.

46.

Yan

. Fabrication and characterization of fully biodegradable natural fiber-reinforced poly (lactic acid) composites. Composites Part B 2014; 56: 717–723.

47.

Yuzay

Auras

. Effects of synthetic and natural zeolites on morphology and thermal degradation of poly (lactic acid) composites. Polym Degrad Stab 2010; 95: 1769–1777.

48.

Santonja-Blasco

Ribes-Greus

Alamo

. Comparative thermal, biological and photodegradation kinetics of polylactide and effect on crystallization rates. Polym Degrad Stab 2013; 98: 771–784.

49.

Mroz

Białas

Mucha

. Thermogravimetric and DSC testing of poly(lactic acid)nanocomposites. Thermochim Acta 2013; 573: 186–192.

50.

Alamri

Low

. Effect of water absorption on the mechanical properties of nanoclay filled recycled cellulose fiber reinforced epoxy hybrid nanocomposites. Composites Part A 2013; 44: 23–31.

51.

Liu

Luo

Cao

. Characterization of organo-montmorillonite (OMMT) modified wood flour and properties of its composites with poly (lactic acid). Composites Part A 2013; 51: 33–42.