Laminated biocomposites based on ramie fabric and poly(lactic acid) were prepared through hot compression molding followed by direct cooling (without heat treatment) or melt crystallization (with heat treatment). The effects of heat treatment and ramie fabric reinforcement on the thermal and mechanical properties of poly(lactic acid) composites were studied. X-ray diffraction and differential scanning calorimetry measurements confirmed that the heat treatment was able to promote the formation of crystals and enhance the crystallinity of poly(lactic acid), and the addition of ramie fabric also accelerated the crystallization rate of poly(lactic acid). Hence, heat treatment and ramie fabric reinforcement both can improve the thermal stability of poly(lactic acid) biocomposites remarkably. The heat deflection temperature of poly(lactic acid)/24 wt% ramie fabric biocomposite with heat treatment was up to 149.3℃, with a highest increase of 90.7℃. The mechanical properties of the ramie fabric-reinforced poly(lactic acid) biocomposites were also improved after heat treatment.
Anonym. Complete mobile phone housing made of PLA, reinforced with kenaf fibres. Bioplast Mag2006; 1: 18–19.
3.
Anonym. Bioplastics in automotive applications. Bioplastics Mag2007; 2: 14–18.
4.
ArbelaizAFernándezBCanteroG. Mechanical properties of flax fibre/polypropylene composites. Influence of fibre/matrix modification and glass fibre hybridization. Compos, Part A2005; 36: 1637–1644.
5.
BodrosEPillinIMontrelayN. Could biopolymers reinforced by randomly scattered flax fibre be used in structural applications?Compos Sci Technol2007; 67: 462–470.
6.
ShanksRAHodzikARidderhofD. Composites of poly(lactic acid) with flax fibers modified by interstitial polymerization. J Appl Polym Sci2006; 99: 2305–2313.
7.
BaghaeiBSkrifvarsMRissanenM. Mechanical and thermal characterization of compression moulded polylactic acid natural fiber composites reinforced with hemp and lyocell fibers. J Appl Polym Sci2014; 131: 40534–40534.
8.
HuRLimJK. Fabrication and mechanical properties of completely biodegradable hemp fiber reinforced polylactic acid composites. J Compos Mater2007; 41: 1655–1669.
9.
MasirekRKulinskiZChionnaD. Composites of poly(L-lactide) with hemp fibers: morphology and thermal and mechanical properties. J Appl Polym Sci2007; 105: 255–268.
10.
ChoDSeoJMLeeHS. Property improvement of natural fiber-reinforced green composites by water treatment. Adv Compos Mater2007; 16: 299–314.
11.
AlvesCFerräoPMCSilvaAJ. Ecodesign of automotive components making use of natural jute fiber composites. J Cleaner Prod2010; 18: 313–327.
12.
YuTRenJLiSM. Effect of fiber surface-treatments on the properties of poly(lactic acid)/ramie composites. Compos, Part A2010; 41: 499–505.
13.
TokoroRVuDMOkuboK. How to improve mechanical properties of poly lactic acid with bamboo fibers. J Mater Sci2008; 43: 775–787.
14.
LeeSHWongS. Biodegradable polymers/bamboo fiber biocomposite with bio-based coupling agent. Compos, Part A2006; 37: 80–91.
15.
OkuboKFujiiTYamashitaN. Improvement of interfacial adhesion in bamboo polymer composite enhanced with micro-fibrillated cellulose. JSME Int J, Ser A2005; 48: 199–204.
16.
DuYCWuTFYanN. Fabrication and characterization of fully biodegradable natural fiber-reinforced poly(lactic acid) composites. Compos, Part B2014; 56: 717–723.
17.
SuryanegaraLOkumuraHNakagaitoAN. The synergetic effect of phenylphosphonic acid zinc and microfibrillated cellulose on the injection molding cycle time of PLA composites. Cellulose2011; 18: 689–698.
DlouhaJSuryanegaraLYanoH. The role of cellulose nanofibres in supercritical foaming of polylactic acid and their effect on the foam morphology. Soft Matter2012; 8: 8704–8713.
20.
HudaMSDrzalLTMohantyAK. Chopped glass and recycled newspaper as reinforcement fibers in injection moulded poly (lactic acid)(PLA) composites: a comparative study. Compos Sci Technol2006; 66: 1813–1824.
21.
KoronisGSilvaAFontulM. Green composites: A review of adequate materials for automotive applications. Compos, Part B2013; 44: 120–127.
ChenDKLiJRenJ. Biocomposites based on ramie fibers and poly(L-lactic acid) (PLLA): morphology and properties. Polym Adv Technol2012; 23: 198–207.
25.
ChenDKLiJRenJ. Influence of fiber surface-treatment on interfacial property of poly(L-lactic acid)/ramie fabric biocomposites under UV-irradiation hydrothermal aging. Mater Chem Phys2011; 126: 524–531.
26.
ChenDKLiJRenJ. Study on sound absorption property of ramie fiber reinforced poly(L-lactic acid) composites: Morphology and properties. Compos, Part A2010; 41: 1012–1018.
27.
MohantyAKMisraMDrzalT. Sustainable bio-composites from renewable resources: opportunities and challenges in the green material world. J Polym Environ2002; 10: 19–26.
28.
ShiQFMouHYLiQY. Influence of heat treatment on the heat distortion temperature of poly(lactic acid)/bamboo fiber/talc hybrid biocomposites. J Appl Polym Sci2012; 123: 2828–2836.
29.
XieSBZhangSMWangFS. Influence of annealing treatment on the heat distortion temperature of nylon-6/montmorillonite nanocomposites. Polym Eng Sci2005; 45: 1247–1253.
30.
GB/T 1447-2005. Fiber-reinforced plastics composites—determination of tensile properties. Standardization Administration of the PR China, implementation date 2005-12-01.
31.
GB/T 1449-2005. Fiber-reinforced plastics composites—determination of flexural properties. Standardization Administration of the PR China, implementation date 2005-12-01.
32.
GB/T 1043-2008. Plastics—determination of charpy impact properties. Standardization Administration of the PR China, implementation date 2009-04-01.
33.
GB/T 1634-2004. Plastics—determination of temperature of deflection under load. Standardization Administration of the PR China, implementation date 2004-12-01.
34.
MathewAPOksmanKSainM. The effect of morphology and chemical characteristics of cellulose reinforcements on the crystallinity of polylactic acid. J Appl Polym Sci2006; 101: 300–310.
35.
SuryanegaraLNakagaitoANYanoH. The effect of crystallization of PLA on the thermal and mechanical properties of microfibrillated cellulose-reinforced PLA composites. Compos Sci Technol2009; 69: 1187–1192.
36.
MathewAPOksmanKSainM. Mechanical properties of biodegradable composites from poly lactic acid (PLA) and microcrystalline cellulose (MCC). J Appl Polym Sci2005; 97: 2014–2025.
