Numerical optimization of soft-mold aided co-curing process of advanced grid-stiffened composite structures

Abstract

The co-curing process for advanced grid-stiffened (AGS) composite structure is a promising manufacturing process, which could reduce the manufacturing cost, augment the advantages and improve the performance of AGS composite structure. An improved method named soft-mold aided co-curing process which replaces the expansion molds by a whole rubber mold is adopted in this paper. This co-curing process is capable to co-cure a typical AGS composite structure with the manufacturer’s recommended cure cycle (MRCC). Numerical models are developed to evaluate the variation of temperature and the degree of cure in AGS composite structure during the soft-mold aided co-curing process. The simulation results were validated by experimental results obtained from embedded temperature sensors. Based on the validated modeling framework, the cycle of cure can be optimized by reducing more than half the time of MRCC while obtaining a reliable degree of cure. The shape and size effects of AGS composite structure on the distribution of temperature and degree of cure are also investigated to provide insights for the optimization of soft-mold aided co-curing process.

Keywords

Advanced grid-stiffened soft-mold aided co-curing process numerical simulation thermal analysis

Get full access to this article

View all access options for this article.

References

Buragohain

Velmurugan

. Study of filament wound grid-stiffened composite cylindrical structures. Compos Struct 2011; 93: 1031–1038.

Sitnikova

Guan

Cantwell

. Modelling of perforation failure in fibre metal laminates subjected to high impulsive blast loading. Int J Solids Struct 2014; 51: 3135–3146.

Shi

Sun

Ren

. Buckling response of advanced grid stiffened carbon–fiber composite cylindrical shells with reinforced cutouts. Compos Part B: Eng 2013; 44: 26–33.

Vasiliev

Barynin

Rasin

. Anisogrid lattice structures–survey of development and application. Compos Struct 2001; 54: 361–370.

Vasiliev

Razin

. Anisogrid composite lattice structures for spacecraft and aircraft applications. Compos Struct 2006; 76: 182–189.

Huybrechts

Meink

Wegner

. Manufacturing theory for advanced grid stiffened structures. Compos Part A: Appl Sci Manuf 2002; 33: 155–161.

Hou

Gramoll

. Fabrication and compressive strength of the composite attachment fitting for launch vehicle. J Adv Mater 2000; 32: 39–45.

Kim

. Fabrication and testing of composite isogrid stiffened cylinder. Compos Struct 1999; 45: 1–6.

Kim

. Fabrication and testing of thin composite isogrid stiffened panel. Compos Struct 2000; 49: 21–25.

10.

Cheung

Pochiraju

. Three-dimensional finite element simulation of curing of polymer composites. Finite Elem Anal Des 2004; 40: 895–912.

11.

Blest

Duffy

McKee

. Curing simulation of thermoset composites. Compos Part A: Appl Sci Manuf 1999; 30: 1289–1309.

12.

Bogetti

Gillespie

. Two-dimensional cure simulation of thick thermosetting composites. J Compos Mater 1991; 25: 239–273.

13.

Guo

Z-S

Zhang

. Temperature field of thick thermoset composite laminates during cure process. Compos Sci Technol 2005; 65: 517–523.

14.

Zhang

. Numerical simulation and experimental study on consolidation of toughened epoxy resin composite laminates. J Compos Mater 2006; 40: 2257–2277.

15.

Park

Lee

. Cure simulation of thick composite structures using the finite element method. J Compos Mater 2001; 35: 188–201.

16.

Capehart

Kia

Abujoudeh

. Cure simulation of thermoset composite panels. J Compos Mater 2007; 41: 1339–1360.

17.

. Cure cycle for thick glass/epoxy composite laminates. J Compos Mater 2002; 36: 19–45.

18.

Joshi

Liu

Lam

. A numerical approach to the modeling of polymer curing in fibre-reinforced composites. Compos Sci Technol 1999; 59: 1003–1013.

19.

Guo

Z-S

Zhang

. Temperature field of thick thermoset composite laminates during cure process. Compos Sci Technol 2005; 65: 517–523.

20.

Huang

Ren

Chen

. Resin flow of an advanced grid-stiffened composite structure in the co-curing process. Appl Compos Mater 2013; 20: 303–314.

21.

Reddy

. An introduction to the finite element method 1993; Vol 2, New York: McGraw Hill.

22.

Hubert

Vaziri

Poursartip

. A two-dimensional flow model for the process simulation of complex shape composite laminates. Int J Numer Meth Eng 1999; 44: 1–26.

23.

Wang

. Enhanced thermal resistance of phenolic resin composites at low loading of graphene oxide. Compos Part A: Appl Sci Manuf 2013; 54: 166–172.