Compression molding of algae fiber and epoxy composites: Modeling of elastic modulus

Abstract

The demand for natural fiber composites in the automotive industry in both Europe and the United States has been forecasted to increase in the coming years. The natural fiber composites based on highly commercialized fibers such as flax, hemp, and sisal has grown to become an important sector of polymeric composites. However, little attention has been addressed to expanding natural fiber composites to include new sources of emerging natural reinforcements, such as reclaimed algae fibers, that have a multiple environmental benefits. Not only are extracted algae fibers biodegradable, the reclamation process has the added benefit of restoring health of waterways choked with algae. This study focuses on the processability of algae fiber–epoxy composites. Short fibers, chemically extracted from raw reclaimed algae, were prepared for natural fiber composite products in two ways. First, randomly oriented mats were produced using the wet-laid process to create layered, compression-molded laminates. Second, loose fibers were dispersed directly into the thermoset matrix to produce a bulk molding compound that was further compression molded into composite lamina. The effect of processing variables such as compaction pressure, temperature, and time were addressed. Moreover, the effect of fiber volume fraction (υ_f) and fiber form were considered. Enhanced mechanical properties were found when 56% υ_f algae fiber was used for the compression-molded laminates composite. This variant exhibited an improvement on the flexural and tensile modulus of 70% and 86% when compared to the neat epoxy. However, the volume of porosity on the same variant was 11% due to lack of compression in some of the fibers. The effect of porosity on the theoretical stiffness was estimated by using the Cox–Krenchel model. Furthermore, an empirical exponential model was formulated to characterize the multi-scale effect of compaction pressure on the overall fiber volume fraction, υ_f.

Keywords

Natural fiber composite epoxy resin theoretical elastic modulus porosity elastic constants damping compression molding

Get full access to this article

View all access options for this article.

References

Bledzki

Heim

Paßmann

et al.

Manufacturing of self-reinforced all-PP composites. In: Fakirov

(ed). Synthetic polymer–polymer composites, Munich: Hanser, 2012, pp. 719–738.

Faruk

Bledzki

Fink

H-P

et al.

Progress report on natural fiber reinforced composites. Macromol Mater Eng 2014; 299: 9–26.

Bio focus at composites Europe 2015. Ecocomposites. Ecocomposite 2015.

Arankalle

. Natural fibers and nano-composites for automotive applications. Popular Plast Packag 2011; 56: 21–28.

Constante

Pillay

Ning

et al.

Utilization of algae blooms as a source of natural fibers for biocomposite materials: Study of morphology and mechanical performance of Lyngbya fibers. Algal Res 2015; 12: 412–420.

Faruk

Bledzki

Fink

H-P

et al.

Biocomposites reinforced with natural fibers: 2000–2010. Prog Polym Sci 2012; 37: 1552–1596.

Bledzki

Reihmane

Gassan

. Properties and modification methods for vegetable fibers for natural fiber composites. J Appl Polym Sci 1996; 59: 1329–1336.

Raquez

J-M

Narayan

Dubois

. Recent advances in reactive extrusion processing of biodegradable polymer-based compositions. Macromol Mater Eng 2008; 293: 447–470.

Symington

Banks

West

et al.

Tensile testing of cellulose based natural fibers for structural composite applications. J Compos Mater 2009; 43: 1083–1108.

10.

Misra

Tripathy

et al.

The influence of chemical surface modification on the performance of sisal-polyester biocomposites. Polym Compos 2002; 23: 164–170.

11.

Francucci

Rodriguez

. Processing of plant fiber composites by liquid molding techniques: An overview. Polym Compos 2016; 37: 718–733.

12.

Prajer M and Ansell MP. Bio-composites for structural applications: Poly-l-lactide reinforced with long sisal fiber bundles. J Appl Polym Sci 2014; 131.

13.

Thitithanasarn

Yamada

Ishiaku

et al.

Jute fabric reinforced engineering thermoplastic sandwich composites. I. The effect of molding time. J Appl Polym Sci 2013; 127: 2952–2959.

14.

Jawaid

Abdul Khalil

HPS

Abu Bakar

. Woven hybrid composites: Tensile and flexural properties of oil palm-woven jute fibres based epoxy composites. Mater Sci Eng A 2011; 528: 5190–5195.

15.

Kitamura

Ito

Teramura

et al.

Application of multilayered paper processing to hybrid random natural fiber mat. Energy Procedia 2014; 56: 247–254.

16.

Huda S and Yang Y. Chemically extracted cornhusk fibers as reinforcement in light-weight poly(propylene) composites. Macromol Mater Eng 2008; 293.

17.

Romli

Alias

Rafie

ASM

et al.

Factorial study on the tensile strength of a coir fiber-reinforced epoxy composite. AASRI Procedia 2012; 3: 242–247.

18.

. The voids formation mechanisms and their effects on the mechanical properties of flax fiber reinforced epoxy composites. Compos Part A: Appl Sci Manuf 2015; 72: 40–48.

19.

Duc

Bourban

Plummer

CJG

et al.

Damping of thermoset and thermoplastic flax fibre composites. Compos Part A: Appl Sci Manuf 2014; 64: 115–123.

20.

Chandra

Singh

Gupta

. Damping studies in fiber-reinforced composites – a review. Compos Struct 1999; 46: 41–51.

21.

Das JN, Nair NG and Subramanian N. In-plane and transverse damping characteristics of short-fibre-reinforced bromobuytl rubber composites. London, ROYAUME-UNI: Institute of Materials, 1993.

22.

Elaheh G. Materials in automotive application, state of art and prospects. In: Chiaberge PM (ed.) New trends and developments in automotive industry, Intechopen, 2011.

23.

Jawaid

Abdul Khalil

HPS

Abu Bakar

et al.

Effect of jute fibre loading on the mechanical and thermal properties of oil palm–epoxy composites. J Compos Mater 2013; 47: 1633–1641.

24.

Schuster

Govignon

Bickerton

. Processability of biobased thermoset resins and flax fibres reinforcements using vacuum assisted resin transfer moulding. Open J Compos Mater 2014; 4: 11–11.

25.

Reck

Türk

. Thermally curable aqueous acrylic resins – a new class of duroplastic binders for wood and natural fibers. Die Angew Makromol Chem 1999; 272: 5–10.

26.

Forming handsheets for physical test of pulp, TAPPI, 2002.

27.

Mallick

. Fiber-reinforced composites: Materials, manufacturing, and design, Boca Raton, Fl: CRC Press, 2008.

28.

Aliabadi

. Woven composites, Singapore: World Scientific, 2015, pp. 248–248.

29.

Cherif

Poilâne

Falher

et al.

Influence of textile treatment on mechanical and sorption properties of flax/epoxy composites. Polym Compos 2013; 34: 1761–1773.

30.

Kim

J-K

Mai

. Engineered interfaces in fiber reinforced composites, 1st ed. Amsterdam; New York: Elsevier Sciences, 1998, pp. xiii–xiii.

31.

Chung

DDL

. Materials for vibration damping. J Mater Sci 2001; 36: 5733–5737.

32.

Senthil Kumar

Siva

Jeyaraj

et al.

Synergy of fiber length and content on free vibration and damping behavior of natural fiber reinforced polyester composite beams. Mater Des 2014; 56: 379–386.

33.

Halpin

Kardos

. Moduli of crystalline polymers employing composite theory. J Appl Phys 1972; 43: 2235–2241.

34.

Halpin JC. Primer on composite materials: Analysis. Rev. ed. Lancaster, PA: Technomic Pub. Co., 1984, p.vii.

35.

Gibson

. Principles of composite material mechanics, New York: McGraw Hill, 1994, pp. xvii–xvii.

36.

Halpin

Pagano

. The laminate approximation for randomly oriented fibrous composites. J Compos Mater 1969; 3: 720–724.

37.

Garkhail

Heijenrath

RWH

Peijs

. Mechanical properties of natural-fibre-mat-reinforced thermoplastics based on flax fibres and polypropylene. Appl Compos Mater 2000; 7: 351–372.

38.

Madsen

Thygesen

Lilholt

. Plant fibre composites – porosity and stiffness. Compos Sci Technol 2009; 69: 1057–1069.

39.

Sobczak

Brüggemann

Putz

. Polyolefin composites with natural fibers and wood-modification of the fiber/filler–matrix interaction. J Appl Polym Sci 2013; 127: 1–17.

40.

Graupner

Fischer

Ziegmann

et al.

Improvement and analysis of fibre/matrix adhesion of regenerated cellulose fibre reinforced PP-, MAPP- and PLA-composites by the use of Eucalyptus globulus lignin. Compos Part B: Eng 2014; 66: 117–125.

41.

Pascault J-P and Williams RJJ (eds). General concepts about epoxy polymers. In: Epoxy polymers. New York: Wiley-VCH Verlag GmbH & Co. KGaA, 2010, pp. 1–12.

42.

Xie

. Permeability and mechanical properties of plant fiber reinforced hybrid composites. Mater Des 2015; 86: 313–320.

43.

Sibaja B, Sargent J and Auad ML. Renewable thermoset copolymers from tung oil and natural terpenes. J Appl Polym Sci 2014; 131.