Thermochemical erosion and thermophysical properties of phenolic resin/carbon fiber/graphite nanocomposites

Abstract

The main objective of this work is an experimental investigation and an analytical modeling of ablation and to analyze the thermophysical properties of nanocomposites based on novolac resin/short carbon fiber/graphite nanocrystalline powders in oxyacetylene flame test. The composite consisting of 40 wt.% carbon fiber was prepared as reference sample of which matrix was modified with three different percentages (6, 9 and 12 wt.%) of nano-sized graphite powders as reinforcement. Ablation is calculated by mass balance equation. Some parameters in the ablation modeling are evaluated by simultaneous thermal gravimetric analysis technique. Results of this work show that ablation rates decrease by the addition of graphite powders. The theoretical ablation rates are 33–38% less than the experimental data analyzed by oxyacetylene flame tests. This difference is reasonable because the effect of fluid stream force of oxyacetylene flame that causes the thermomechanical erosion of the surface is omitted in theoretical calculations. Therefore the model only calculates thermochemical erosion. Also, the thermophysical properties change due to heating is analyzed. Moreover, in nanocomposite with 9 wt.% graphite nanopowders, the rate of ablation and thermal diffusivity coefficient decreased by 10% and 50%, respectively, and thermal stability increased by 12% compared to the reference sample.

Keywords

Nanocomposite ablation rate analytical modeling thermophysical properties

Get full access to this article

View all access options for this article.

References

Firouzmanesh

Aref Azar

. Study of thermal stability and ablation behavior of carbon/epoxy-novolac composites. J Appl Polym Sci 2003; 88: 2455–2461.

Natali

Monti

Puglia

. Ablative properties of carbon black and MWNT/phenolic composite: a comparative study. Compos A 2012; 43: 174–182.

Turchi

Bianchi

Thakre

. Radiation and roughness effects on nozzle thermochemical erosion in solid rocket motors. J Propul Power 2014; 30: 314–324.

Papaspyrides CD and Kiliaris P. Polymer green flame retardants. National Technical University of Athens, Greece, 2014.

Bianchi

Turchi

Nasuti

. Chemical erosion of carbon-phenolic rocket nozzles with finite-rate surface chemistry. J Propul Power 2013; 29: 1220–1320–1220–1320.

Pavarin

. Numerical investigation of nozzle. Thermochemical behaviour in hybrid rocket motors 2015, pp. 4–5–4–5.

Dimitrienko

. Effect of thermomechanical erosion on heterogeneous combustion of composite materials in high-speed flows. Combust Flame 2000; 122: 211–226.

Huang

. Thermal analysis of charring materials based on pyrolysis interface model. Therm Sci 2014; 18: 1591–1596.

Huang

. Nonlinear pyrolysis layer model for thermal behavior of nonhomogeneous charring materials. J Appl Polym Sci 2015; 132: 42331–42339.

10.

Yin

Zhang

. Modeling ablative behavior and thermal response of carbon/carbon composites. Comput Mater Sci 2014; 95: 35–40.

11.

Kuo

Keswani

. Effect of pressure and propellant composition on graphite rocket nozzle erosion rate. J Propul Power 2007; 23: 1242–1254.

12.

Acharya

Kuo

. Effect of reaction kinetic schemes on graphite rocket nozzle erosion rates. Int J Energetic Mater Chem Propul 2010; 9: 71–90.

13.

Thakre

Yang

. Chemical erosion of carbon–carbon/graphite nozzles in solid-propellant rocket motors. J Propul Power 2008; 24: 822–833.

14.

Bianchi

Nasuti

. Carbon–carbon nozzle erosion and shape change in full-scale solid-rocket motors. J Propul Power 2012; 28: 820–830.

15.

Bianchi

Nasuti

Onofri

. Thermochemical erosion analysis for graphite/carbon–carbon rocket nozzles. J Propul Power 2011; 27: 820–830.

16.

Thakre P and Yang V. Mechanical erosion of nozzle material in solid-propellant rocket motors. AIAA Paper, 2010, pp.615.

17.

Turchi

Bianchi

Nasuti

. A numerical approach for the study of the gas-surface interaction in carbon–phenolic solid rocket nozzles. Aerospace Sci Technol 2013; 27: 25–31.

18.

Ommati

Ahmadi

Davachi

. Erosion rate of random short carbon fibre/phenolic resin composites: modelling and experimental approach. Iran Polym J 2011; 20: 943–954.

19.

Huang

Tian

. A nonlinear pyrolysis layer model for analyzing thermal behavior of charring ablator. Int J Therm Sci 2015; 98: 104–112.

20.

Huang

Tian

. Nonlinear analysis on thermal behavior of charring materials with surface ablation. Int J Heat Mass Transfer 2015; 84: 245–252.

21.

Huang

. The novel designs of charring composites for thermal protection application in reentry vehicles. Appl Therm Eng 2016; 93: 849–855.

22.

Huang

. A new mechanism of surface ablation of charring materials for a vehicle during reentry. Appl Therm Eng 2016; 106: 838–849.

23.

Huang

Wang

. Protection of pyrolysis gases combustion against charring materials’ surface ablation. Int J Heat Mass Transfer 2016; 102: 10–17.

24.

Beyler CL and Hirschler MM. Thermal decomposition of polymers. In: SFPE handbook of fire protection engineering, chapter 7, 3rd ed, Quincy, MA: NFPA, 2001.

25.

Pinaud G, Bouilly JM, Barcena J, et al. HYDRA: macroscopic modeling of hybrid ablative thermal protection system. In: Presented at the Proceedings of the 5th international conference on porous media and its applications in science and engineering, Kona, Hawaii, 2014.

26.

Bahramian

Kokabi

Famili

MHN

. Ablation and thermal degradation behaviour of a composite based on resol type phenolic resin: process modeling and experimental. Polymer 2006; 47: 3661–3673.

27.

Huang

. Effects of gradient density on effective heat capacity of charring ablative material for re-entry vehicles. Int J Numer Meth Heat Fluid Flow 2015; 25: 472–483.

28.

Sanoj

Kandasubramanian

. Hybrid carbon-carbon ablative composites for thermal protection in aerospace. J Compos 2014; 28: 1–15.

29.

Bahramian

Kokabi

. Ablation mechanism of polymer layered silicate nanocomposite heat shield. J Hazard Mater 2009; 166: 445–454.

30.

Torre

Kenny

. Degradation behaviour of a composite material for thermal protection systems part II process simulation. J Mater Sci 1998; 33: 3145–3149.

31.

Mouritz

. Post-fire flexural properties of fibre reinforced polyester, epoxy and phenolic composites. J Mater Sci 2002; 37: 1377–1386.

32.

Watt

Staggs

JEJ

McIntosh

. A theoretical explanation of the influence of char formation on the ignition of polymers. Fire Saf J 2001; 36: 421–436.

33.

Delfa

Urso-Miano

Gibson

. Characterisation and modelling of structural integrity of carbon fibre wing box laminate subject to fire. Plast Rubber Compos 2009; 38: 367–373.

34.

Bahramian

. Pyrolysis and flammability properties of novolac/graphite nanocomposites. Fire Saf J 2013; 61: 265–273.

35.

Bahramian AR and Kokabi M. Ablative thermal protection systems: modeling characterization and applications, Tarbiat Modares University, 2013.

36.

Lyon

. Pyrolysis kinetics of char forming polymers. Polym Degrad Stabil 1998; 61: 201–209.

37.

Looyeh

MRE

Samanta

Jihan

. Modelling of reinforced polymer composites subject to thermo-mechanical loading. Int J Numer Meth Eng 2005; 63: 898–925.

38.

Balaji

Sasikumar

Elayaperumal

. Thermal, thermo oxidative and ablative behavior of cenosphere filled ceramic/phenolic composites. Polym Degrad Stabil 2015; 114: 125–132.

39.

Winya

Chankapoe

Kiriratnikom

. Ablation, mechanical and thermal properties of fiber/phenolic matrix composites. World Acad Sci Eng Technol 2012; 6: 9–23.

40.

Liu

. Preparation and thermal conductivity of novolac/ni/graphite nanosheet composites. Appl Polym Sci 2012; 124: 4403–4408.

41.

Pop

Varshney

Roy

. Thermal properties of graphene: fundamentals and applications. MRS Bull 2012; 37: 1273–1273.

42.

Bahramian

Astaneh

. Improvement of ablation and heat shielding performance of carbon fiber reinforced composite using graphite and kaolinite nanopowders. Iran Polym J 2014; 23: 979–985.