In this study, the impregnated fibre bundle test, a common method used by carbon and glass fibre manufacturers to determine the properties of fibres used in composites, was adapted for natural fibres and validated by a round robin test on one type of natural fibres, namely flax fibres. Five European laboratories have carried out in parallel the impregnated fibre bundle test, on the same batch of hackled flax (long fibres), to check the applicability and reliability of this modified method on natural fibres. The results were compared to the more traditional single fibre test on elementary fibres. The back-calculated fibre stiffness shows a very low scatter between the five laboratories of less than ±5% (59.8 ± 2.4 GPa, as measured between 0 and 0.1% strain). The fibre ultimate tensile strength of 527 ± 138 MPa has a higher scatter, compared to stiffness values, as this property is highly sensitive to imperfections and flaws.
YaoJYuW. Tensile strength and its variation for PAN-based carbon fibers. II. Calibration of the variation from testing. J Appl Polym Sci2007; 104: 2625–2632.
2.
ChiZFChouTWShenGY. Determination of single fibre strength distribution from fibre bundle testing. J Mater Sci1984; 19: 3319–3324.
3.
ISO 10618:2004. Carbon fibre – determination of tensile properties of resin-impregnated yarn, Geneva: ISO, 2004.
4.
Toray Carbon Fibers. Technical data sheet – Torayca T700s.
5.
SwolfsYVerpoestIGorbatikhL. Issues in strength models for unidirectional fibre-reinforced composites related to Weibull distributions, fibre packings and boundary effects. Compos Sci Technol2015; 114: 42–49.
6.
SwolfsYMortonHScottAE. Synchrotron radiation computed tomography for experimental validation of a tensile strength model for unidirectional fibre-reinforced composites. Composites Part A: Applied Science and Manufacturing2015; 7: 106–113.
7.
SwolfsYMcMeekingRMVerpoestI. Matrix cracks around fibre breaks and their effect on stress redistribution and failure development in unidirectional composites. Compos Sci Technol2015; 108: 16–22.
8.
BaleyCLe DuigouABourmaudA. Reinforcement of polymers by flax fibres: Bio-Based Composites for High-Performance Materials: From Strategy to Industrial Application, Boca Raton, USA: CRC press, 2014, pp. 87–87.
9.
DepuydtD. Characterization of the impact behaviour of flax fibre composites, Leuven, Belgium: Departement of Material Engineering, KU Leuven, 2013, pp. 129–129.
10.
BosHL. The potential of flax fibres as reinforcement for composite materials, Eindhoven, Netherlands: Technische Universiteit Eindhoven, 2004.
11.
BosHLVan den OeverMJAPetersO. Tensile and compressive properties of flax fibres for natural fibre reinforced composites. J Mater Sci2002; 37: 1683–1692.
12.
BaleyC. Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increase. Compos A Appl Sci Manuf2002; 33: 939–948.
13.
SmoleMSHribernikSKleinschekKS. Plant fibres for textile and technical applications. Adv Agrophys Res2013; 10: 52372–52372.
14.
CharletKBeakouA. Mechanical properties of interfaces within a flax bundle part I: experimental analysis. Int J Adhes Adhes2011; 31: 875–881.
15.
Perremans D, Hendrickx K, Verpoest I and Van Vuure AW. Investigation of the behaviour of flax fibre composites in humid conditions. 2nd International Conference on Natural Fibers Sao Miguel, Portugal, 27–28 April 2015.
16.
MüssigJHaagKThe use of flax fibres as reinforcements in composites. In: FarukOSainM (eds). Biofiber reinforcements in composite materials, Cambridge (UK): Woodhead Publishing, 2015, pp. 35–85.
17.
VerpoestIBaetsJVan AckerJ. Flax and hemp fibres: A natural solution for the composite industry, 1st edn. Paris, France: Prepared for JEC by the European Scientific Committee of CELC – JEC Group/CELC, 2012.
Pariset J. European flax/linen & hemp fibers,advanced & natural material for the composite industry. JEC Composites Magazine, March 2015, Vol 95, pp.34–6. Paris: JEC 2015.
20.
ASTM D2343 – 09. Standard test method for tensile properties of glass fiber Strands, yarns, and rovings used in reinforced plastics, West Conshohocken, PA: ASTM International, 2009.
Saneco. Lin á usage textile en France - Evolution des ventes de semences par variétés. http://www.saneco.com/en/, 2015.
23.
MartinNMouretNDaviesP. Influence of the degree of retting of flax fibers on the tensile properties of single fibers and short fiber/polypropylene composites. Ind Crops Prod2013; 49: 755–767.
24.
CharletKBaleyCMorvanC. Characteristics of Hermès flax fibres as a function of their location in the stem and properties of the derived unidirectional composites. Compos A Appl Sci Manuf2007; 38: 1912–1921.
25.
CharletKJernotJGominaM. Influence of an Agatha flax fibre location in a stem on its mechanical, chemical and morphological properties. Compos Sci Technol2009; 69: 1399–1403.
26.
TrujilloEMoesenMOsorio SernaL. Bamboo fibres for reinforcement in composite materials: strength Weibull analysis. Compos A Appl Sci Manuf2014; 61: 115–125.
27.
ZhaoFTakedaN. Effect of interfacial adhesion and statistical fiber strength on tensile strength of unidirectional glass fiber/epoxy composites. Part I: experiment results. Compos A Appl Sci Manuf2000; 31: 1203–1214.
28.
Lorenzo L and Hahn HT. Fatigue failure mechanisms in unidirectional composites. Symposium on Composite Materials: Fatigue and Fracture was held in Dallas, Texas, 24–25 October 1984.
29.
CorollerGLefeuvreALe DuigouA. Effect of flax fibres individualisation on tensile failure of flax/epoxy unidirectional composite. Compos A Appl Sci Manuf2013; 51: 62–70.
30.
NF T25-501-1: Fibres de renfort - Fibres de lin pour composites plastiques - Partie 1 : terminologie et caractérisation des fibres de lin. AFNOR standards, 2015.
31.
NF T25-501-2: Fibres de renfort - Fibres de lin pour composites plastiques - Partie 2 : détermination des propriétés en traction des fibres élémentaires. AFNOR standards, 2015.
32.
NF T25-501-3: Fibres de renfort - Fibres de lin pour composites plastiques - Partie 3 : détermination des propriétés en traction des fibres techniques. AFNOR standards, 2015.
33.
Trujillo De Los RíosE. Polymer composite materials based on bamboo fibres (Polymere composietmaterialen gebaseerd op bamboevezels), Leuven, Belgium: Departement of Materials Engineering, KU Leuven, 2014.
34.
HughesMCarpenterJHillC. Deformation and fracture behaviour of flax fibre reinforced thermosetting polymer matrix composites. J Mater Sci2007; 42: 2499–2511.
35.
ISO 14127:2008. Carbon-fibre-reinforced composites – determination of the resin, fibre and void contents, Geneva: ISO, 2011.
36.
GibsonRF. Principles of composite material mechanics, Boca Raton, USA: CRC Press, 2011.
GiancaneSPanellaFWDattomaV. Characterization of fatigue damage in long fiber epoxy composite laminates. Int J Fatigue2010; 32: 46–53.
39.
CélinoAFréourSJacqueminFCasariP. The hygroscopic behavior of plant fibers: A review. Frontiers in chemistry2013; 2014; 43: 1–12.
40.
BerthelotJM. Effect of fibre misalignment on the elastic properties of oriented discontinuous fibre composites. Fibre Sci Technol1982; 17: 25–39.
41.
Straumit, Ilya, S. Lomov, Farida Bensadoun, and Martine Wevers. Automatic transformation of 3D micro-CT images into finite element models with anisotropic local properties. In: ECCM 16: European conference on composite materials. 22–26 June 2014.
