The cross-section design of wood/polyvinyl chloride composite log-wall panels was studied for effects on compressive load, thermal and acoustic properties. Variation in the slenderness ratio (2, 4, 8, 10 and 12) on compressive load was also included. Two parameters of log-wall cross sections consisting of web thickness (3.5, 7.0 and 10.0 mm) and flange spacing (45, 60 and 90 mm) were also investigated. Experimental results indicated that higher web thickness and lower flange spacing of wood/polyvinyl chloride composite log-wall cross sections increased the ultimate compressive load and noise reduction. However, lateral deflection and thermal resistance decreased. Increasing the slenderness ratio of the log-wall panels resulted in lower ultimate compressive load and higher lateral deflection. Empirical equations for predicting the ultimate compressive load of wood/polyvinyl chloride composite log-wall panels in practical uses were proposed regarding web thickness, flange spacing and slenderness ratio.
YodrutikarnT. Precast concrete structures step by step, Bangkok: Sunthorn Film Company Limited, 2012, pp. 12–29.
2.
Wattanasinsak S. A comparison between precast construction and traditional construction for the improvement in the innovation of real estate’s construction. Master of Engineering Thesis, Construction Management, Faculty of Engineering, Suranaree University of Technology, Thailand, 2013.
3.
KlyosovAA. Wood-plastic composites, New Jersey: John Wiley & Sons, Inc., 2007, pp. 1–11. 356-368.
4.
PulngernTKaewkalyaPRosarpitakVet al.Experimental and computational investigations of creep responses of wood/PVC composite members. Int Polym Process2014; 29: 307–316.
5.
V.P. Wood Co., Ltd, www.vpwood.com (2011, accessed 29 June 2015).
6.
PulngernTChucheepsakulSPadyencheanCet al.Effects of cross-section design and loading direction on the creep and fatigue properties of wood/PVC composite beams. J Vinyl Additive Technol2010; 16: 42–49.
7.
PulngernTPadyencheanCRosarpitakVet al.Flexural and creep strengthening for wood/PVC composite members using flat bar strips. Mater Design2011; 32: 3431–3439.
8.
PulngernTChimkhlaiARosarpitakVet al.Analytical, numerical and experimental investigations on flexural strengthening for wood/PVC composite members using flat bar strips. Constr Build Mater2013; 41: 545–556.
9.
BombergerBD. The preservation of historic architecture: 26 preservation briefs, Washington, DC: The Lyons Press, 1991, pp. 285–300.
10.
BrancoJMAraujoPJ. Structural behavior of log timber walls under lateral in-plane loads. Eng Struct2012; 40: 371–382.
11.
BedonCFragiacomoM. Numerical and analytical assessment of the buckling behavior of Blockhaus log-walls under in-plane compression. Eng Struct2015; 82: 134–150.
12.
Vinson JR. The behavior of sandwich structures of isotropic and composite materials. Pennsylvania: Technomic Publishing Company, 1999, pp.1–17.
13.
MousaMAUddinN. Structural behavior and modeling of full-scale composite structural insulated wall panels. Eng Struct2012; 41: 320–334.
14.
ACI 318:2005. Building code requirements for structural concrete.
15.
GanesanNIndiraPVSanthakumarA. prediction of ultimate strength of reinforced geopolymer concrete wall panels in one-way action. Constr Build Mater2013; 48: 91–97.
OralGKYenerAKBayazitNT. Building envelope design with the objective to ensure thermal, visual and acoustic comfort conditions. Build Environ2004; 39: 281–287.
18.
Phillips RM. Investigation of transmission loss through double wall structures with varying small air gaps using modal analysis. Master of Science Thesis, Mechanical Engineering, Faculty of Engineering, University of Louisville, Kentucky, 2014.
TadeuAJBMateusDMR. Sound transmission through single, double and triple glazing experimental evaluation. Appl Acoust2001; 62: 307–325.
21.
LondonA. Transmission of reverberant sound through double walls. J Res Nat Bureau Standard1950; 44: 77–88.
22.
AhmadAMaslehuddinMAl-HadhramiLM. In situ measurement of thermal transmittance and thermal resistance of hollow reinforced precast concrete walls. Energy Build2014; 84: 132–141.
23.
DesogusGMuraSRicciuR. Comparing different approaches to in situ measurement of building components thermal resistance. Energy Build2011; 43: 2613–2630.
24.
AlbaticiRTonelliAMChiognaM. A comprehensive experimental approach for the validation of quantitative infrared thermography in the evaluation of building thermal transmittance. Appl Energy2015; 141: 218–228.
25.
EganMD. Concepts in thermal comfort, NJ: Prentice-Hall, 1975, pp. 45–67.
26.
PulngernTChitsamranTChucheepsakulSet al.Effect of temperature on mechanical properties and creep responses for wood/PVC composites. Constr Build Mater2016; 111: 191–198.
27.
Annual book of ASTM standards E 72:2015. Standard test method of conducting strength tests of panels for building construction, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, United States.
28.
PapanikolaouGTrochidesA. Design of a test facility for transmission loss measurement. Appl Acoust1985; 18: 315–323.
29.
LertwattanarukPMasuwanK. Investigation of sound insulation properties of fiber cement board containing natural fibers. KMUTT Res Develop J2015; 38: 71–86.
30.
ASTM E 413:2016. Classification for rating sound insulation, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, United States.
31.
SaitoYKanematsuKMatsuiT. Measurement of thermal conductivity of magnesia brick with straight brick specimens by hot wire method. Japan Instit Metals2009; 50: 2623–2630.
32.
CengelYA. Heat and mass transfer: a practical approach, 3rd ed. NY: McGraw-Hill, 2006, pp. 1–174.
33.
Japanese Industrial Standards (JIS) R2616:2001. Testing method for thermal conductivity of insulating fire bricks by water circulation, Minato-Ku, Tokyo 108-0073 Japan.
34.
HemondConradJ. Engineering acoustics and noise control, NJ: Prentice-Hall, 1983, pp. 1–84.
