The potential of kaolin as a reinforcing filler for rubber composites with new sulfur cure systems

Abstract

The effect of a large amount of kaolin (China clay) on the viscosity, cure, hardness, Young’s modulus, tensile strength, elongation at break, stored energy density at break, tear energy and compression set resistance of some sulfur-cured natural rubber, polybutadiene rubber and ethylene-propylene-diene rubber composites was investigated. The kaolin surface had been pre-treated with 3-mercaptopropyltrimethoxysilane to improve its dispersion in the rubbers. For natural rubber, the hardness and Young’s modulus improved, tensile strength and tear energy were unchanged and the remaining properties deteriorated when kaolin was added. The viscosity increased and the scorch and optimum cure times decreased whilst the cure rate rose with kaolin. For polybutadiene rubber and ethylene-propylene-diene rubber, with the exception of the compression set resistance, all the properties including the viscosity gained from the kaolin. The kaolin was found to be extending or non-reinforcing filler for natural rubber, and highly reinforcing for polybutadiene rubber and EPDM. In addition, the scorch and optimum cure times and cure rate of polybutadiene rubber benefitted, whereas with the exception of the scorch time, the optimum cure time and cure rate of ethylene-propylene-diene rubber were adversely affected by kaolin.

Keywords

Rubber kaolin viscosity cure properties mechanical properties

Get full access to this article

View all access options for this article.

References

Dunnom

. Use of reinforcing silicas. Rubber Age 1968; 100: 49–57.

Dannenberg

. Carbon black dispersion and reinforcement. Rubber ChemTechnol 1982; 25: 843–857.

Bristow

Tiller

. Correlation of structure and properties of natural rubber vulcanizates. Kautsch Gummi Kunstst 1970; 23: 55–59.

Nasir

Teh

. The effects of various types of crosslinks on the physical properties of natural rubber. Eur Polym J 1988; 24: 733–736.

Wolff

Wang

Tan

. Filler-elastomer interactions. Part VII. Study on bound rubber. Rubber Chem Technol 1993; 66: 163–177.

Dannenberg

. The effects of surface chemical interactions on the properties of filler-reinforced rubbers. Rubber Chem Technol 1975; 48: 410–443.

Andrews

. Reinforcing of rubber by fillers. Rubber Chem Technol 1963; 36: 325–336.

Saeed

Ansarifar

Ellis

et al.

Two advanced styrene-butadiene/ polybutadiene rubber blends filled with a silanized silica nanofiller for potential use in passenger car tire tread compound. J Apply Polym Sci 2012; 123: 1518–1529.

Hair

Hertl

. Acidity of surface hydroxyl groups. J Phys Chem 1970; 74: 91–94.

10.

Hockey

Pethica

. Surface hydration of silicas. Trans Faraday Soc 1961; 57: 2247–2262.

11.

Wolff

GÖrl

Wang

et al.

Silane modified silicas-silica-based tread compounds. Eur Rubber J 1994; 16: 16–19.

12.

Wolff

. Chemical aspects of rubber reinforcement by fillers. Rubber Chem Technol 1996; 69: 325–346.

13.

Wang

Song

et al.

Characterization of high-performance exfoliated natural rubber/organoclay nanocomposites. J Appl Poly Sci 2008; 109: 3831–3838.

14.

Teh

Mohd Ishak

Hashim

et al.

Physical properties of natural rubber/organoclay nanocomposites compatibilized with epoxidized natural rubber. J Apply Polym Sci 2006; 100: 1083–1092.

15.

Thostenson

Chou

. Nanocomposites in context. Comp Sci Technol 2005; 65: 491–516.

16.

Varghese

Karger-Kocsis

Gatos

. Melt compounded epoxidized natural rubber/layered silicate nanocomposites: structure–properties relationships. Polymer 2003; 44: 3977–3983.

17.

Rattanasom

Prasertsri

Ruangritnumchai

. Comparison of the mechanical properties at similar hardness level of natural rubber filled with various reinforcing-fillers. Polymer Test 2009; 28: 8–12.

18.

Jia

Liu

Wang

et al.

Advances in natural rubber/montmorillonite nanocomposites. In: Long

(ed). Biodegradable polymer blends and composites from renewable resources, Toronto: John Wiley & Son, Inc., Hoboken, 2008.

19.

Chua

Mariatti

Azizan

et al.

Effects of surface-functionalized multi-walled carbon nanotubes on the properties of poly(dimethyl siloxane) nanocomposites. Comp Sci Technol 2010; 70: 671–677.

20.

Verdejo

Saiz-Arroyo

Carretero-Gonzalez

et al.

Physical properties of silicone foams filled with carbon nanotubes and functionalized graphene sheets. Eur Polym J 2008; 44: 2790–2797.

21.

Bokobza

. Multiwall carbon nanotube elastomeric composites. A review. Polymer 2007; 48: 4907–4920.

22.

Zhan

Xia

et al.

Dispersion and exfoliation of graphene in rubber by an ultrasonically-assisted latex mixing and in situ reduction process. Macromol Mater Eng 2011; 296: 590–602.

23.

Lewicki

Liggat

Patel

. The thermal degradation behaviour of polydimethylsiloxane/montmorillonite nanocomposites. Polym Degrad Stab 2009; 94: 1548–1557.

24.

Sengupta

Chakraborty

Bandyopadhyay

et al.

A short review on rubber/clay nanocomposites with emphasis on mechanical properties. Polym Eng Sci 2007; 47: 1956–1974.

25.

Kim

Pal

Sridhar

. Recent advances in elastomeric nanocomposites: Advanced structured materials, Berlin, Heidelberg: Verlag, 2011, pp. 5–5.

26.

Bokobza

. The reinforcement of elastomeric networks by fillers. Macromol Mater Eng 2004; 289: 607–621.

27.

Das

Stockelhuber

Jurk

et al.

Routes to rubber nanocomposites. Macromol Symp 2010; 291–292: 95–105.

28.

Stephen

Thomas

. Rubber nanocomposites: Preparation, properties and applications, Singapore: Wiley, 2010. Chapter 1.

29.

Paul

Robeson

. Polymer nanotechnology: nanocomposites . Polymer 2008; 49: 3187–3204.

30.

Ahmadi

Huang

. Fabrication and physical properties of EPDM-organoclay nanocomposites. Comp Sci Technol 2005; 65: 1069–1076.

31.

Labruyère

Gorrasi

Monteverde

et al.

Transport properties of organic vapours in silicone/clay nanocomposites. Polymer 2009; 50: 3626–3637.

32.

Horsch

Serhatkulu

Gulari

et al.

Supercritical CO₂ dispersion of nano-clays and clay/polymer nanocomposites. Polymer 2006; 47: 7485–7496.

33.

Zoromba Sh

Belal

AAM

Ali

AEM

et al.

Preparation and characterisation of some NR and SBR formulations containing different modified kaolinite. Polym-Plast Technol Eng 2007; 46: 529–535.

34.

Sukumar

Menon

ARR

. Organomodified kaolin as a reinforcing filler for natural rubber. J Apply Polym Sci 2008; 107: 3476–3483.

35.

Yahaya

Adebowale

Olu-Owolabi

. Cure characteristics and rheological properties of modified kaolin-natural rubber composites. Am Chem Sci J 2014; 4: 472–480.

36.

Ciullo

Hewitt

. The rubber formulary, New York, NY: Noyes Publications, 1999, pp. 91–91.

37.

Ostad-Movahed

Ansar Yasin

Ansarifar

et al.

Comparing effects of silanized silica nanofiller on the crosslinking and mechanical properties of natural rubber and synthetic polyisoprene. J Appl Polym Sci 2008; 109: 869–881.

38.

Wang

. Effect of polymer-filler and filler-filler interaction on dynamic properties of filled vulcanizates. Rubber Chem Technol 1998; 71: 520–589.

39.

http://www.westliberty.edu/health-and-safety/files/2012/08/Stearic-Acid.pdf .

40.

Brown

Porter

Thomas

. The dependence of strength properties on crosslinked structure in vulcanized polyisoprenes. Kautsch Gummi Kunstst 1987; 40: 17–19.

41.

Hallett J and Moninot G. Carbon black and polycyclic aromatic hydrocarbons–Technical issues and regulations. In: The 7th international conference on rubber chemicals, compounding and mixing, Vienna, Austria, December 2010.

42.

Ciullo

Hewitt

. The rubber formulary, New York, NY: Noyes Publications, 1999, pp. 79–79.

43.

Ciullo

Hewitt

. The rubber formulary, New York, NY: Noyes Publications, 1999, pp. 147–147.

44.

Ciullo

Hewitt

. The rubber formulary, New York, NY: Noyes Publications, 1999, pp. 275–275.

45.

Movahed

Ansarifar

Mirzaie

. Effect of various efficient vulcanization cure systems on the compression set of a nitrile rubber filled with different fillers. J Appl Polym Sci 2015; 132: 1–10.

46.

Datta

. Rubber curing systems. Rapra Rev Rep 2002; 12: 1–37.

47.

Ansarifar

Saeed

. Developing ethylene-propylene-diene rubber compounds for industrial applications using a sulfur-bearing silanized silica nanofiller. Polym Compos 2013; 34: 2019–2025.

48.

Tian

. Formulation and morphology of kaolin-filled rubber composites. Appl Clay Sci 2013; 80–81: 93–97.

49.

Leblanc

. Elastomer–filler interactions and the rheology of filled rubber compounds. J Appl Polym Sci 2000; 78: 1541–1550.

50.

Wang

Wolff

Donnet

. Filler-elastomer interactions. Part I: Silica surface energies and interactions with model compounds. Rubber Chem Technol 1991; 64: 559–576.

51.

FrÖhlich

Niedermeier

Luginsland

. The effect of filler–filler and filler-elastomer interaction on rubber reinforcement. Compos Part A 2005; 36: 449–460.

52.

Wolff

. Optimization of silane-silica OTR compounds. Pat I: variation of mixing temperature and time during the modification of silica with bis-(3-triethyoxysilyl- propyl)-tetrasulfide. Rubber Chem Technol 1982; 55: 967–989.

53.

Cochet

Barruel

Barriquand

et al.

Dispersibility measurements of pre. silicas. Influence of dispersion on mechanical properties. Rubber World 1994; 219: 20–24.

54.

Ahagon

. Evaluation of chain scission during mixing of filled compounds. Rubber Chem Technol 1996; 69: 742–751.

55.

Harmon

Jacobs

. Degradation of natural rubber during mill mastication. J Appl Polym Sci 1966; 10: 253–257.

56.

Fries

Pandit

. Mastication of rubber. Rubber Chem Technol 1982; 55: 309–327.

57.

Pliskin

Tokita

. Bound rubber in elastomers: Analysis of elastomer filler interaction and its effect on viscosity and modulus of composite systems. J Appl Polym Sci 1972; 16: 473–492.

58.

http://hyperphysics.phy-astr.gsu.edu/hbase/Particles/atomsiz.html (accessed 24 February 2017).

59.

Gent

. Crystallisation in natural rubber. II: the influence of impurities. Transactions 1954; 30: 139–143.

60.

Cook

Groves

Tinker

. Investigating crosslinking in blends by differential scanning calorimetry. J Rubb Res 2003; 6: 121–128.