This work reports the influence of seawater ageing on the mode I and mode II interlaminar fracture toughness ( and ) of prepreg-based unidirectional carbon fiber/epoxy laminates containing carbon nanofillers. Double cantilever beam and end notched flexure specimens were fabricated from composite laminates containing multiwalled carbon nanotubes and/or reduced graphene oxide at their middle plane interface. Experimental results showed that the addition of carbon nanofillers moderately increased the and propagation of composite laminates before and after their immersion in seawater with respect to the reference laminate under dry condition. For double cantilever beam and end notched flexure specimens aged in seawater, it was observed that and increased by 57% and 13% for specimens with multiwalled carbon nanotube/reduced graphene oxide hybrid combination, 39% and 4% for specimens with multiwalled carbon nanotubes and 53% and 8% for specimens with reduced graphene oxide respectively, as a consequence of the plasticization effect of seawater immersion on the matrix. Fracture surface examination by scanning electron microscopy revealed interlaminar failure associated to mode I and mode II delamination and toughening mechanisms produced by the multiwalled carbon nanotubes and reduced graphene oxide at delaminated regions of composite laminates.
SelaNIshaiO.Interlaminar fracture toughness and toughening of laminated composite materials: a review. Composite1989;
20: 423–435.
2.
ShenC-HSpringerGS.Effects of moisture and temperature on the tensile strength of composite materials. J Compos Mater1977;
11: 2–16.
3.
TualNCarrereNDaviesPet al.
Characterization of sea water ageing effects on mechanical properties of carbon/epoxy composites for tidal turbine blades. Compos Part A2015;
78: 380–389.
4.
YuBYangJ.Hygrothermal effects in composites. In: MSJHashmi (ed) Reference module in materials science and materials engineering.
Amsterdam:
Elsevier, 2017, pp.502–519.
5.
AspLE.The effects of moisture and temperature on the interlaminar delamination toughness of a carbon/epoxy composite. Compos Sci Technol1998;
58: 967–977.
6.
DaviesPRajapakseY.Durability of composites in a marine environment. Netherlands:
Springer, 2014. [Database][Mismatch]
7.
KootsookosAMouritzAP.Seawater durability of glass- and carbon-polymer composites. Compos Sci Technol2004;
64: 1503–1511.
8.
ZhaoYLiuWSeahLKet al.
Delamination growth behavior of a woven E-glass/bismaleimide composite in seawater environment. Compos Part B2016;
106: 332–343.
9.
SloanFESeymourRJ.The Effect of seawater exposure on mode I interlamiar fracture and crack growth in graphite/epoxy. J Compos Mater1992;
26: 2655–2673.
10.
JorioADresselhausGDresselhausMS.Carbon nanotubes: Advanced topics in the synthesis, structure, properties and applications.
New York:
Springer-Verlag, 2008.
11.
ThostensonETRenZChouT-W.Advances in the science and technology of carbon nanotubes and their composites: a review. Compos Sci Technol2001;
61: 1899–1912.
12.
AvourisPDimitrakopoulosC.Graphene: synthesis and applications. Mater Today2012;
15: 86–97.
13.
LubineauGRahamanA.A review of strategies for improving the degradation properties of laminated continuous-fiber/epoxy composites with carbon-based nanoreinforcements. Carbon2012;
50: 2377–2395.
14.
DikshitVBhudoliaSKJoshiSC.Multiscale polymer composites: a review of the interlaminar fracture toughness improvement. Fibers2017;
5: 1–27.
15.
AvilésFKú-HerreraJJOliva-AvilésAI.Deposition of carbon nanotubes on fibers. In: RafieeR (ed) Carbon nanotube-reinforced polymers.
Amsterdam:
Elsevier, 2018, pp.117–144.
16.
ZhangHLiuYHuoSet al.
Filtration effects of graphene nanoplatelets in resin infusion processes: problems and possible solutions. Compos Sci Technol2017;
139: 138–145.
17.
ZhangHKuwataMBilottiEet al. Integrated damage sensing in fibre-reinforced composites with extremely low carbon nanotube loadings. J Nanomater2015; Article ID 785834: 1–7.
18.
ZhuJImamACraneRet al.
Processing a glass fiber reinforced vinyl ester composite with nanotube enhancement of interlaminar shear strength. Compos Sci Technol2007;
67: 1509–1517.
19.
DavisDCWhelanBD.An experimental study of interlaminar shear fracture toughness of a nanotube reinforced composite. Compos Part B2011;
42: 105–116.
20.
ThakrePRLagoudasDCRiddickJCet al.
Investigation of the effect of single wall carbon nanotubes on interlaminar fracture toughness of woven carbon fiber-epoxy composites. J Compos Mater2011;
45: 1091–1107.
JoshiSCDikshitV.Enhancing interlaminar fracture characteristics of woven CFRP prepreg composites through CNT dispersion. J Compos Mater2012;
46: 665–675.
23.
ShanFLGuYZLiMet al.
Effect of deposited carbon nanotubes on interlaminar properties of carbon fiber-reinforced epoxy composites using a developed spraying processing. Polym Compos2013;
34: 41–50.
24.
AlmuhammadiKAlfanoMYangYet al.
Analysis of interlaminar fracture toughness and damage mechanisms in composite laminates reinforced with sprayed multi-walled carbon nanotubes. Mater Des2014;
53: 921–927.
25.
ZhangHLiuYKuwataMet al.
Improved fracture toughness and integrated damage sensing capability by spray coated CNTs on carbon fibre prepreg. Compos Part A2015;
70: 102–110.
MujikaFVargasGIbarretxeJet al.
Influence of the modification with MWCNT on the interlaminar fracture properties of long carbon fiber composites. Compos Part B2012;
43: 1336–1340.
28.
YangSYLinWNHuangYLet al.
Synergetic effects of graphene platelets and carbon nanotubes on the mechanical and thermal properties of epoxy composites. Carbon2015;
49: 793–803.
29.
KwonYJKimYJeonHet al.
Graphene/carbon nanotube hybrid as a multi-functional interfacial reinforcement for carbon fiber-reinforced composites. Compos Part B2017;
122: 23–30.
30.
HuaYLiFLiuYet al.
Positive synergistic effect of graphene oxide/carbon nanotube hybrid coating on glass fiber/epoxy interfacial normal bond strength. Compos Sci Technol2017;
149: 294–304.
31.
GaoBZhangRHeMet al.
Effect of a multiscale reinforcement by carbon fiber surface treatment with graphene oxide/carbon nanotubes on the mechanical properties of reinforced carbon/carbon composites.Compos Part A2016;
90: 433–440.
32.
WangPNHsiehTHChiangCLet al.
Synergetic effects of mechanical properties on graphene nanoplatelet and multiwalled carbon nanotube hybrids reinforced epoxy/carbon fiber composites. J Nanomater2015; 1–9. Article ID 838032:
33.
KostagiannakopoulouCTsilimigkraXSotiriadisGet al.
Synergy effect of carbon nano-fillers on the fracture toughness of structural composites. Compos Part B2017;
129: 18–25.
34.
WangBZhouXYinJet al.
Investigation on some matrix-dominated properties of hybrid multiscale composites based on carbon fiber/carbon nanotube modified epoxy. J Appl Polym Sci2013;
128: 990–996.
GargMSharmaSMehtaR.Carbon nanotube-reinforced glass fiber epoxy composite laminates exposed to hygrothermal conditioning. J Mater Sci2016;
51: 8562–8578.
37.
GuadagnoLVertuccioLSorrentinoAet al.
Mechanical and barrier properties of epoxy resin filled with multi-walled carbon nanotubes. Carbon2009;
47: 2419–2430.
38.
ProlongoSGGudeMRUrenaA.Water uptake of epoxy composites reinforced with carbon nanofillers. Compos Part A2012;
43: 2169–2175.
39.
SrivastavaVKGriesTVeitDet al.
Effect of nanomaterial on mode I and mode II interlaminar fracture toughness of woven carbon fabric reinforced polymer composites. Eng Fract Mech2017;
180: 73–86.
40.
Ramos-GaliciaLMendezLNMartínez-HernándezALet al.
Improved performance of an epoxy matrix as a result of combining graphene oxide and reduced graphene. Int J Polym Sci2013;
Article ID 493147: 1–7.
41.
DomunNHadaviniaHZhangTet al.
Improving the fracture toughness properties of epoxy using graphene nanoplatelets at low filler content. Nanocompos2017;
3: 85–96.
42.
KamarNTHossainMMKhomenkoAet al.
Interlaminar reinforcement of glass fiber/epoxy composites with graphene nanoplatelets. Compos Part A2015;
70: 82–92.
43.
Rodríguez-GonzálezJARubio-GonzálezCJiménez-MoraMet al.
Influence of the hybrid combination of multiwalled carbon nanotubes and graphene oxide on interlaminar mechanical properties of carbon fiber/epoxy laminates. Appl Compos Mater2017. 25: 1115–1131
44.
CarraGCarvelliV.Long-term bending performance and service life prediction of pultruded glass fibre reinforced polymer composites. Compos Struct2015;
127: 308–315.
45.
BazliMAshrafiHOskoueiAV.Effect of harsh environments on mechanical properties of GFRP pultruded profiles. Compos Part B2016;
99: 203–215.
46.
ASTM D5528:2007. Standard test method for mode I interlaminar fracture toughness of unidirectional fiber-reinforced polymer matrix composites. West Conshohocken (PA): ASTM International.
47.
ASTM D7905:2014. Standard test method for determination of the mode II interlaminar fracture toughness of unidirectional fiber-reinforced polymer matrix composites. West Conshohocken (PA): ASTM International.
48.
KatagiriGIshidaHIshitaniA.Raman spectra of graphite edge planes. Carbon1998;
26: 565–571.
49.
MalardLMPimentaMADresselhausGet al.
Raman spectroscopy in graphene. Phys Rep2009;
473: 51–87.
50.
XuLChengL.Graphite oxide under high pressure: a Raman spectroscopic study. J Nanomater2013;
Article ID 731875: 1–5.
51.
HardisRJessopJLPPetersFEet al.
Cure kinetics characterization and monitoring of an epoxy resin using DSC, Raman spectroscopy, and DEA. Compos Part A2013;
49: 100–108.
52.
McCloryCMcNallyTBaxendaleMet al.
Electrical and rheological percolation of PMMA/MWCNT nanocomposites as a function of CNT geometry and functionality. Eur Polym J2010;
46: 854–868.
53.
Pantoja-CastroMAPérez-RoblesJFGonzález-RodríguezHet al.
Synthesis and investigation of PMMA films with homogeneously dispersed multiwalled carbon nanotubes. Mater Chemis Phys2013;
140: 458–464.
54.
CuongTVPhamVHTranQTet al.
Photoluminescence and Raman studies of graphene thin films prepared by reduction of graphene oxide. Mater Lett2010;
64: 399–401.
55.
ChoiHSAhnKJNamJ-Det al.
Hygroscopic aspects of epoxy/carbon fiber composite laminates in aircraft environments. Compos Part A2001;
32: 709–720.
56.
NogueiraPRamírezCTorresAet al.
Effect of water sorption on the structure and mechanical properties of an epoxy resin system. J Appl Polym Sci2001;
80: 71–80.
57.
WalkerLHuXZ.Mode I delamination behaviour of short fibre reinforced carbon fibre/epoxy composites following environmental conditioning. Compos Sci Technol2003;
63: 531–537.
58.
AlessiSPitarresiGSpadaroG.Effect of hydrothermal ageing on the thermal and delamination fracture behaviour of CFRP composites. Compos Part B2014;
67: 145–153.
59.
NashNHRayDYoungTMet al.
The influence of hydrothermal conditioning on the mode-I, thermal and flexural properties of carbon/benzoxazine composites with a thermoplastic toughening interlayer. Compos Part A2015;
76: 135–144.
60.
NashNHYoungTMStanleyWF.The influence of a thermoplastic toughening interlayer and hydrothermal conditioning on the mode-II interlaminar fracture toughness of carbon/benzoxazine composites. Compos Part A2016;
81: 111–120.
61.
ShivakumarKNPandurangaRSkujinsJet al.
Assessment of mode-II fracture tests for unidirectional fiber reinforced composite laminates. J Reinf Plast Compos2015;
34: 1905–1925.
