There are few studies on the pressurization-compression mechanical behavior of the pultruded rod stitched efficient unit structure (PRSEUS) in blended wing body (BWB) aircraft. Thus, finite‐element models of PRSEUS curved panels with varying curvatures, prefabricated cracks, and repair strategies were developed in this study to fill this gap. The damage mechanisms under pressurization–compression cases were systematically analyzed through an improved Hashin failure criterion coupled with a damage‐evolution scheme. The results demonstrate that curvature changes significantly affected panel stiffness and ultimate load capacity. Specifically, under biaxial compression, the frame‐direction load capacity decreased by 23%–27% compared to uniaxial compression; prefabricated cracks reduced ultimate loads by up to 65% and 62% in the frame direction and the stringer direction, respectively; composite repairs effectively restored structural performance, and titanium-alloy repairs elevated frame-direction ultimate loads by 8.3%–15.2% over unrepaired panels. These findings support the design and damage‐repair strategies for PRSEUS structures.
BerganABakuckasJJr.AwerbuchJ, et al.Assessment of damage containment features of a full-scale PRSEUS fuselage panel. Compos Struct2014; 113: 174–185. https://doi.org/10.1016/j.compstruct.2014.03.011
3.
BonshawDMoteAHarrisonK, et al.Understanding lightning damage formation in a carbon-epoxy pultruded rod stitched efficient unitized structure (PRSEUS) composite. Advanced Composites and Hybrid Materials2024; 7(2): 58. https://doi.org/10.1007/s42114-024-00832-7
4.
SahaSBakerMLSullivanRW. Manufacturing a 3D stitched highly unitized PRSEUS-based conformal propellant tank: lessons learned. Compos B Eng2025; 299: 112403. https://doi.org/10.1016/j.compositesb.2025.112403
5.
BoushabDMoteAPriddyMW, et al.Fractographic investigation of carbon/epoxy PRSEUS composites exposed to flame after compressive failure. Compos Appl Sci Manuf2024; 187: 108507. https://doi.org/10.1016/j.compositesa.2024.108507
6.
PapapetrouVSTamijaniAKimD. Preliminary wing study of general aviation aircraft with PRSEUS panels. In: 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference,San Diego, California, USA, 4-8January 2016.
7.
JegleyDCCormanJA. Technology maturation report for damage arresting composites under the environmentally responsible aviation project. NASA Technical Memorandum (NASA/TM-20220015363), 2022.
TianRWangHChangLet al.Study on compressive strength of PRSEUS configuration panel. China Aeronautical Science and Technology Conference,7th China Aeronautical Science and Technology Conference,2024(Published 29 March 2025). Springer, p. 2024.
10.
AlazizRSahaSSullivanRW, et al.Influence of 3-D periodic stitching patterns on the strain distributions in polymer matrix composites. Compos Struct2021; 278: 114690. https://doi.org/10.1016/j.compstruct.2021.114690
11.
SahaSSullivanRWBakerML. Gas permeability of three-dimensional stitched carbon/epoxy composites for cryogenic applications. Compos B Eng2021; 216: 108847. https://doi.org/10.1016/j.compositesb.2021.108847
12.
SahaSSullivanRWBakerML. Gas permeability mitigation of cryogenically cycled stitched composites using thin plies. Compos Struct2023; 304: 116352. https://doi.org/10.1016/j.compstruct.2022.116352
13.
BerganAC. Test and analysis of stitched composite structures to assess damage containment capability. Drexel University, 2014.
14.
LanziLBisagniC. Post-buckling experimental tests and numerical analyses on composite stiffened panels. In: 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference,07 April 2003 - 10 April 2003, Norfolk, Virginia.
15.
VelickiAYovanofNBarajaJet al.Damage arresting composites for shaped vehicles-phase II final report. NASA Contractor Report (NASA/CR-2011-216880). 2011.
16.
YovanofNVelickiALiV. Advanced structural stability analysis of a non-circular, BWB-Shaped vehicle. In: 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 04 May 2009 - 07 May 2009, Palm Springs, California.
17.
JegleyDC.Behavior of frame-stiffened composite panels with damage. In: 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, April 8-11,2013, Boston, Massachusetts.
18.
YovanofNJegleyD. Compressive behavior of frame-stiffened composite panels. In: 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 04 April 2011 - 07 April 2011, Denver, Colorado.
19.
Sanz-DouglassGJ. Parametric study of influence of stiffener variables on postbuckling response of frame-stiffened composite panels. San Diego State University, 2015.
20.
GouldKLovejoyAEJegleyDCet al.Nonlinear analysis and post-test correlation for a curved PRSEUS Panel. In: 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, ■■■,2013.
21.
JegleyDCLovejoyAEThrashPet al.History of structural stitching development for aerospace applications. AIAA SCITECH 2024 Forum, 8-12 January 2024,Orlando, FL.
HashinZ. Fatigue failure criteria for unidirectional fiber composites. technical report issued by the university, 1981.
24.
DavidsonGLabibA. Learning from failures: design improvements using a multiple criteria decision-making process. Proc Inst Mech Eng G J Aerosp Eng2003; 217(4): 207–216. https://doi.org/10.1243/095441003769700762
PrawitasariSMuliasariRM. Assessment of risk as A sustainable coffee supply chain strategyon rural area in Jember regency. Jurnal Penelitian Ipteks2024; 9(1): 131–148. https://doi.org/10.32528/penelitianipteks.v9i1.1502
27.
EtemadiEZhangMGholikordM, et al.Quasi-static and dynamic behavior analysis of 3D CFRP woven laminated composite auxetic structures for load-bearing and energy absorption applications. Compos Struct2024; 340: 118182. https://doi.org/10.1016/j.compstruct.2024.118182
28.
LiuNChenP. A three-dimensional failure criterion model considering the effects of fiber misalignment on longitudinal tensile failure. Compos Sci Technol2024; 247: 110424. https://doi.org/10.1016/j.compscitech.2023.110424
29.
ChangZZhaoPZhangZ, et al.Damage analysis of deployable thin-walled composite shell structure during coiling up. Thin-Walled Struct2024; 195: 111395. https://doi.org/10.1016/j.tws.2023.111395
30.
ZhangNFuYJiangW, et al.Study on fatigue properties of polyamide 6 modified carbon fiber reinforced composites. Int J Fatig2025; 195: 108860. https://doi.org/10.1016/j.ijfatigue.2025.108860
31.
ParryRH. Mohr circles, stress paths and geotechnics. CRC Press, 2004.
32.
ChristensenRMTimoshenko medal award paper—completion and closure on failure criteria for unidirectional fiber composite materials. J Appl Mech2014; 81(1): p. 011011. https://doi.org/10.1115/1.4025177. 2013.
33.
Matthias DeuschleHKröplinB-H. Finite element implementation of Puck’s failure theory for fibre-reinforced composites under three-dimensional stress. J Compos Mater2012; 46(19-20): 2485–2513. https://doi.org/10.1177/0021998312451480
34.
LutzGGetriebebauVK-U. Highlights of the updated version of part 3 of VDI guideline 2014 (development of fibre-reinforced plastics components, analysis). In Proceedings of the 2005 Conference ofGerman SAMPE, TU Darmstadt, Germany, March 3-4, 2005.
35.
YongjieZWuYZhuS, et al. Buckling and progressive damage analysis of representative compressed PRSEUS panel in blended-wing-body civil aircraft. Acta Aeronauticaet Astronautica Sinica. 2019; 40(9): 623185.
36.
PrzekopA. Repair concepts as design constraints of a stiffened composite PRSEUS panel. In: 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 23 April 2012 - 26 April 2012, Honolulu, Hawaii.
37.
ZhangYEttoumiSCuiB, et al.Damage initiation analysis of a tension stiffened composite PRSEUS panel based on modified hashin criteria. International Journal of Aerospace Engineering2023; 2023(1): 5085334. https://doi.org/10.1155/2023/5085334
38.
MirsamadiS. Advanced Subsonic Technology (AST) composite wing material stiffness and allowable strength properties for stitched composite laminates. Boeing company, advanced transport aircraft development, 1998. Rept. 98K0318.
39.
WangZGuoRZhangP, et al.Transverse low-velocity impact behaviors of pultruded carbon-fiber-reinforced polymer rods with tensile preloads: experiment and simulation. Compos B Eng2024; 283: 111672. https://doi.org/10.1016/j.compositesb.2024.111672
40.
PoxonS. The mechanical response of low to high density Rohacell foams. Oxford University, 2013.
41.
ZhangYWuY. Research on setting method of neutral plane offset of shell element in PRSEUS panel structure modeling. In: 2021 12th International Conference on Mechanical and Aerospace Engineering (ICMAE), 16-19 July 2021, Athens, Greece.
