Transverse Shear Stiffness of T300/5208 Graphite-Epoxy in Simple Bending

Abstract

Evaluation of the complete set of elastic constants of a graphite/epoxy laminate, including the transverse shear moduli, was achieved by conducting tension, compression, and bending tests on square-section specimens cut 0° and 90° to the fiber axis from 64-ply unidirectional T300/5208 laminate. Axial test specimens were instrumented with tee gages to obtain data on ex tensional moduli and Poisson's ratios. Bending deflections were analyzed using rigorous finite difference solutions for stress distribution to derive the shear moduli along with the extensional moduli acting in bending. A self- consistent set of properties was determined which established the material as being transversely isotropic and conforming to the linear theory of elasticity. The values obtained for the elastic constants were in good agreement with published data except for the in-plane shear modulus, which was somewhat lower than indicated by other test methods. Calculations of the Timoshenko shear coefficient indicated a large variation with fiber orientation and span.

Get full access to this article

View all access options for this article.

References

L.B. Greszczuk , "Shear Modulus Determination of Isotropic and Composite Materials," ASTM STP 460, pp. 140-149 (1969).

J.M. Whitney and J.C. Halpin , "Analysis of Laminated Anisotropic Tubes Under Combined Loading." J. Comp. Mat., Vol. 2, No. 3 (July, 1968 ), pp. 360-367.

P.H. Pettit , "A Simplified Method of Determining the In-Plane Shear Stress-Strain Response of Unidirectional Composites," ASTM STP 460, pp. 83-93 (1969).

B.W. Rosen , "A Simple Procedure for Experimental Determination of the Longitudinal Shear Modulus of Unidirectional Composites," J. Comp. Mat. , Vol. 6 (1972), pp. 552-554. 5. C.C. Chamis and J.H. Sinclair , "Ten-Deg Off-Axis Test for Shear Properties in Fiber Composites," Experimental Mechanics, September, 1977, pp. 339-346.

R.D. Kriz and W.W. Stinchcomb , "Elastic Moduli of Transversely Isotropic Graphite Fibers and Their Composites," Experimental Mechanics, Vol. 19, No. 2, February, 1979, pp. 41-49.

G. Terry , "A Comparative Investigation of Some Methods of Unidirectional, In-plane Shear Characterization of Composite Materials," Composites , October, 1979, pp. 233-237.

K.N. Lauraitis and P.E. Sandorff , "Effect of Environment on the Compressive Strengths of Laminated Epoxy Matrix Composites," AFML-TR-79-4179 (1979).

G. Stoeffler , "Determination of Torsion Strength and Shear Moduli of a Multi-Layer Composite," J. Composite Materials , Vol. 14, April, 1980 pp. 95-110 April, 1980 .

N.J. Pagano , "Shear Moduli of Orthotropic Composites," AFML-TR-79-4164, March, 1980.

10.

M. Knight and N.J. Pagano , "The Determination of Interlaminar Moduli of Graphite/ Epoxy Composites ," presented at Mechanics of Composites Review, 28-30 October 1981, Dayton, Ohio.

11.

H.D. Wagner , S. Fischer , I. Roman , and G. Marom , "The Effect of Fiber Content on the Simultaneous Determination of Young's and Shear Moduli of Unidirectional Composites," Composites, October 1981, pp. 257-259.

12.

D.E. Walrath and D.F. Adams , "The Iosipescu Shear Test as Applied to Composite Materials," to be published in Experimental Mechanics.

13.

A.M. James , et al, "Advanced Manufacturing Development of a Composite Empennage Component for L-1011 Aircraft," Quarterly Technical Report No. 7, NASA Contract NAS1-14000, 14 October, 1977.

14.

H.T. Hahn and S.W. Tsai , "Non-Linear Elastic Behavior of Unidirectional Composite Laminate," J. Composite Materials, Vol. 7 ( 1973), pp. 102-118.

15.

P.E. Sandorff , "Saint-Venant Effects in an Orthotropic Beam ," J. Composite Materials, Vol. 14 (1980), pp. 199-212.

16.

E. Reissner , "Upper and Lower Bounds for Deflections of Laminated Cantilever Beams Including the Effect of Transverse Shear Deformation ," J. Appl. Mech. Trans. ASME, Ser. E, Vol. 40 (1973), pp. 988-991.

17.

S. Nair and E. Reissner , "Improved Upper and Lower Bounds for Deflections of Orthotropic Cantilever Beams," International J. Solids and Structures, Vol. 11, no. 9 (1975), pp. 960-971.

18.

J.G. Davis , Jr., "Compressive Strength of Fiber-Reinforced Composite Materials ," ASTM STP 580 ( 1975), pp. 364-377.