The equations governing the problem of low-velocity impact of a simply supported rectangular midplane-symmetric laminated plate are nondimensionalized such that the problem is defined in terms of five dimensionless parameters. A parametric study using the Graeco-Latin Factorial Plan is performed. Semi-empirical formulas for maxi mum impact force, impact duration, and maximum back surface strains are obtained. It is found that some of the simple impact models provide the bounds for the case of impact on a finite extent plate. A one parameter model is derived for impacts of short duration.
Zener, C.1941. "The Intrinsic Inelasticity of Large Plates," Physical Review, 59:669-673.
2.
Sun, C.T. and S. Chattopadhyay .1975. "Dynamic Response of Anisotropic Laminated Plates under Initial Stress to Impact of a Mass," J. of Applied Mechanics, 42:683-698.
3.
Morton, J.1988. "Scaling of Impact-Loaded Carbon-Fiber Composites," AIAA Journal, 26:989-994.
4.
Mittal, R.K.1987. "A Simplified Analysis of the Effect of Transverse Shear on the Response of Elastic Plates to Impact Loading," Int. J. Solids Structures, 23:1191-1203.
5.
Ochoa, C.M. "Nondimensional Models for Low Velocity Impact of Laminated Composite Panels," 1987SDM Conference, AIAA Paper No. 87-0802.
6.
Bert, C.W.1987. "Simplified Method for Predicting Maximum Strain in Panels Subjected to Low-Velocity Transverse Impact," Society of Eng. Science, Prepnnt No. ESP24-87033.
7.
Olsson, R.1989. "Impact Response of Orthotropic Composite Plates Predicted by a One-Parameter Differential Equation," Report No. FFA TN 1989-07, The Aeronautical Research Institute of Sweden, Stockholm , Sweden.
8.
Bucinell, R.B., C.B. Madsen, R.J. Nuismer, S.T. Benzinger and M.E. Morgan.1989. "Experimental Investigation of Scaling Impact Response and Damage in Composite Rocket Motor Cases," JANNAF Composite Motor Case and Structures Mechanical Behavior Meeting, Jet Propulsion Laboratory, Anaheim, CA, November 7-9, 1989.
9.
Sun, C.T. and S.H. Yang.1980. "Contact Law and Impact Response of Laminated Composites," NASA CR-159884.
10.
Sankar, B.V.1989. "Interlaminar Shear Stresses in Composite Laminates Due to Static Indentation," J. Reinforced Plastics & Composites , 8:458-471.
11.
Sankar, B.V. and C.T. Sun.1985. "An Efficient Numerical Algorithm for Transverse Impact Problems," Computers and Structures , 20:1009-1012.
12.
Schenck, H.1961. Theories of Engineering Experimentation, McGraw-Hill, pp. 85-115.
13.
LaCombe, S.J.1985. "Finite Element Analysis of Delaminations in an Orthotropic Beam," Master thesis, Department of Mechanical Engineering, Bradley University, Peoria, IL.
14.
Timoshenko, S.P. and J.N. Goodier.1970. Theory of Elasticity , NY: McGraw-Hill, p. 421.
15.
Sankar, B.V., C. Ku and P.T. Nguyen.1990. "Nondimensional Impact Models for Composite Laminates," Proceedings of the American Society for Composites, Fifth Technical Conference, Lancaster, PA: Technomic Publishing Co., Inc., U.S.A., pp. 600-610.
