An Analysis of Curvature and Layup Effects on Delamination in Notched Composite Beams

Abstract

Two-dimensional finite element modeling has been used to determine strain energy release rates for delamination cracks in straight and curved notched tensile beams. The notched tensile beam (NTB) is a low-order analog of a cylindrical pressure vessel with an external part-through hole. The material was an S-glass/epoxy fiber rein forced composite material. Specimens were 8 plies thick with notches 2 and 4 plies deep. Uni-directional [0°]₈ and multi-directional [0°,0°, +77°, -77°]₂ layups have been in vestigated. Strain energy release rates were calculated using the virtual crack closure tech nique. The finite element results reveal a mode II dominance similar to the cracked lap shear (CLS) specimen. The effect of curvature was to lower the strain energy release rates slightly (5-13%). Total strain energy release rates were generally higher for the multi- directional layup (by 1½ to 3 times), but the G_II/G_I ratio may increase or decrease depend ing on the notch depth and the orientation of the plies bounding the delamination.

Get full access to this article

View all access options for this article.

References

Hui, D. and T. J. Kozik, eds. 1989. "Composites and Other New Materials for PVP: Design and Analysis Considerations." Proceedings of the 1989 ASME Pressure Vessels and Piping Conference, PVP Vol. 174, Honolulu, Hawaii.

Simons, D. "Delamination and Nonlinear Geometric Effects in Laser-Induced Composite Failure," presented at Composite Structures Modeling Workshop sponsored by Air Force Weapons Laboratory (WL/TALE) and R & D Associates, December 5-6, 1989.

Harbert, S.J. and H.A. Hogan. 1991. "An Analysis of Delamination in a Fiber Reinforced Composite Material Notched Tensile Bar," in Composite Material Technology-1991, D. Hui and T. J. Kozik, eds., proceedings of the 14th ASME ETCE, Houston, TX: 37.153-159.

1989. PATRAN Plus User Manual. Costa Mesa, CA: PDA Engineering.

1989. ABAQUS User's Manual. Providence, RI : Hibbitt, Karlsson & Sorensen, Inc.

Raju, I.S. , J.H. Crews , Jr. and M.A. Aminpour . 1987. "Convergence of Strain Energy Release Rate Components for Edge-Delaminated Composite Laminates," NASA TM 89135.

Rybicki, E.F. and M.F. Kanninen. 1977. "A Finite Element Calculation of Stress-Intensity Factors by Modified Crack-Closure Integral ," Engineering Fracture Mechanics, 9:931-938.

Raju, I.S. 1987. "Calculation of Strain-Energy-Release Rates with Higher Order and Singular Finite Elements," Engineering Fracture Mechanics, 28:251-274.

Hooper, S.J. and C. Hwu. 1989 "A Mixed Mode Fracture Analysis of the Crack Lap Shear Specimen Using a Sublaminate Approach," Paper No. 89-1255-CP, Proceedings of the AIAA 30th Structures, Structural Dynamics and Materials Conference, Mobile Alabama: pp. 830-836.

10.

Johnson, W.S. and S. Mall 1985. "A Fracture Mechanics Approach for Designing Adhesively Bonded Joints," Delamination and Debonding of Materials, ASTM STP 876, W. S. Johnston , ed., Philadelphia: ASTM, pp. 189-199.

11.

Ramkumar, R.L. and J.D. Whitcomb. 1985 "Characterization of Mode I and Mixed-Mode Delamination Growth in T300/5208 Graphite/Epoxy," Delamination and Debonding of Materials, ASTM STP 876, W. S. Johnson , ed., Philadelphia. ASTM, pp. 315-335.

12.

Salpekar, S.A. , I.S. Raju and T.K. O'Brien. 1991. "Strain-Energy-Release Rate Analysis of Delamination in a Tapered Laminate Subjected to Tension Load ," J. Composite Materials, 25:118-141.