Dynamic Mechanical Analysis of Pultruded Glass-Graphite/Epoxy Hybrid Composites at Elevated Temperatures

Abstract

In this paper the dynamic performance characteristics of pultruded glass-graphite/epoxy hybrid samples at elevated temperatures are presented. In previous research the dynamic mechanical properties of the hybrid composites have been characterized at room temperature but the wide application range of these pultruded products necessitates their characterization at high temperatures and over longer periods. The dynamic mechanical analysis technique has been employed to characterize pultruded glass-graphite/epoxy hybrid composite materials over a wide temperature range. At elevated temperatures, the rate of degradation in flexural modulus and variation in loss factor were found to be dependent on the fiber lay-up sequence. Results indicate that the width of the glass transition zone, an important design criterion, can be effectively broadened by judicious incorporation of the glass fibers. Tests repeated on post-cured pultruded products demonstrate a significant shift in the glass transition temperature towards higher side along with an increase in the onset temperature of glass transition. The frequency multiplexing technique used in conjunction with the time-temperature superposition principle proved to be an effective method for predicting the long-term behavior of these hybrids.

Keywords

pultrusion composites hybridization viscoelasticity glass-transition damping dynamic mechanical analysis frequency multiplexing time-temperature super-position storage modulus loss factor

Get full access to this article

View all access options for this article.

References

1. Mantena, P. R. and R. F. Gibson . 1990. "Dynamic Mechanical Properties of Hybrid Polyethylene/Graphite Composites," Proceedings of the 22nd International SAMPE Technical Conference, MA, November, pp. 370-382.

2. Summerscales, J. and D. Short . 1988. "Carbon Fibre and Glass Fibre Hybrid Reinforced Plastics;" Composites (July):157-166.

3. Kelly, A. , ed. 1989. Concise Encylopedia of Composite Materials. Cambridge, MA: The MIT Press.

4. Sumerack, J. E. 1987. "Understanding Pultrusion Variables for the First Time," 40th Annual Conference, Reinforced Plastics/Composites Institute, Society of Plastics Industry.

5. Kumar, P. 1994. "Study of Static Mechanical Properties of Pultruded Hybrid Graphite/GlassEpoxy Composites," M.S. Thesis, the University of Mississippi.

6. Vaughan, J. G. 1988. "Use of Statistical Design Experimentation to Characterize and Optimize the Pultrusion Process;" 43rd Annual Conference, Composites Institute, The Society of Plastics Industry, Inc., 6-D:1-6, February 1-5.

7. Mantena, P. R. , R. Vangipuram and J. G. Vaughan . 1994. "Dynamic Flexural Properties of Pultruded Glass/Graphite Hybrid Composites;" Proceedings of the 39th International SAMPE Symposium and Exhibition, Anaheim, CA, April 11-14, 39:174-182.

8. Foreman, J. , S. R. Sauerbrunn and C. L. Marcozzi . 1992. "Exploring the Sensitivity of Thermal Analysis Techniques to Glass Transition;" Applications Brief, TA Instruments, DE.

9. Blaine, R. L. and M. G. Lofthouse . 1992. "Cure of Epoxy Laminates by Dynamic Mechanical Analysis," Applications Brief, Number TA-65. DE: Du Pont Company.

10.

10. Barpanda, D. 1995. "Effects of Time and Temperature on the Dynamic Flexural Properties of Pultruded Hybrid Composites;" M.S. Thesis, the University of Mississippi.

11.

11. 1993. 983 DMA Operators Manual. DE: TA Instruments.

12.

12. Timoshenko, S. 1960. Strength of Materials, Part I. New York: Van Nostrand Co., pp. 170-170.

13.

13. Ward, I. M. 1983. Mechanical Properties of Solid Polymers. New York: John Wiley and Sons.

14.

14. Rosen, S. L. 1971. Fundamental Principles of Polymeric Materials for Practicing Engineers. Barnes and Noble Inc., pp. 229-232.

15.

15. Ferry, J. D. 1980. Viscoelastic Properties of Polymers, 3rd edition. New York: John Wiley and Sons.