Stress Field in Coated Continuous Fiber-Reinforced Polymeric Composite Due to Hygrothermal Loading

Abstract

Based on a four phase model of the composite, effects of fiber-matrix interphase (coating) on the stresses developed in different constituent phases due to hygrothermal loadings are evaluated. Interphase coating with high, low and the same modulus as that of the matrix have been considered. Obtained stresses, considering degradation in properties of the coating and the matrix due to moisture absorption and temperature rise, have been compared with the corresponding values furnished without properties degradation. Graphite being transversely isotropic and having opposite nature of thermal expansion coefficients in the longitudinal and transverse directions, the bulk of the results are given for the graphite/epoxy composite. The importance of the consideration of coating as a separate phase with its appropriate properties on the stress concentrations in different constituent phases is clearly brought out. It is also suggested that due accounting should be made for the changes in the properties of the matrix and the coating, caused by hygrothermal conditioning, otherwise the stress estimates could be quite misleading and erroneous. Effects of coating thickness and fiber volume fraction are also discussed.

Keywords

micromechanics hygrothermal effect polymeric composite coating affect CCA model

Get full access to this article

View all access options for this article.

References

1. Adams, D. E. and L. A. Berglund . 1987. 'A Micromechanics Analysis of the Influence of Polymer Matrix Composites," Journal of Reinforced Plastics and Composites, 6:66-88.

2. Miller, A. K. and D. F. Adams . 1978. "Inelastic Miromechanical Analysis of Graphite/Epoxy Composites Subjected to Hygrothermal Cycling," Advanced Composite Materials Environmental Effects. ASTM STP 658, J. R. Vinson , ed., American Society for Testing and Materials, pp. 121-142.

3. Adams, D. F. and A. K. Miller . 1977. "Hygrothermal Microstreses in a Unidirectional Composite Exhibiting Inelastic Material Behavior," Journal of Composite Materials, 11:285-299.

4. Broutman, L. J. and B. D. Agarwal . 1974. 'A Theoretical Study of the Effect of an Interfacial Layer on the Properties of Composites," Polymer Engineering Science, 14(8):581-588.

5. Arridge, R. G. C. 1975. "The Effect of Interlayers on the Transverse Stresses in Fiber Composites," Polymer Engineering Science, 15(10):757-760.

6. Christensen, R. M. 1979. "Effective Moduli of Cylindrical and Lamellar Systems," in Mechanics of Composite Materials, J. Wiley, pp. 73-105.

7. Mikita, Y. and M. Taya . 1985. "Stress Field in a Coated Continuous Fiber Composite Subjected to Thermo-Mechanical Loadings," Journal of Composite Materials, 19:554-578.

8. Theocaris, P. S. and C. B. Demakos . 1992. "The Influence of the Elastic Properties and Dimensions of the Coating on the Stiffness of Encapsulated Fiber Composites," Composite Science and Technology, 45(4):293-305.

9. Theocaris, P. S. and C. B. Demakos . 1994. "The Anisotropy Effect on the Stiffness and Toughness of Encapsulated Fiber Composites," Journal of Reinforced Plastics and Composites, 13:998-1022.

10.

10. Jones, R. M. Mechanics of Composite Material, McGraw-Hill Kagakusha Ltd.

11.

11. Chamis, C. C. 1983. "Simplified Composite Micromechanics Equations for Hygral, Thermal, and Mechanical Properties," NASA Technical Memorandum 83320, prepared for the Thirty Eighth Annual Conference of the Society of the Plastics Industry (SPI), Reinforced Plastics/Composites Institute, Houston, Texas, pp. 1-10.

12.

12. Cairns, D. S. and D. F. Adams . 1984. "Moisture and Thermal Expansion Properties of Unidirectional Composite Materials and the Epoxy Matrix," Environmental Effects on Composite Materials, Vol. 2. George S. Springer , ed., pp. 300-316.

13.

13. Chamis, C. C. , R. F. Lark and J. H. Sinclair . 1978. "Integrated Theory for Predicting the Hygrothermomechanical Response of Advanced Composite Structural Components," Advanced Composite Materials-Environmental Effects, ASTM STP 658, J. R. Vinson , ed., American Society for Testing Materials, pp. 160-192.