Investigations on the Role of Foam Layers in the Failure of Glass-Epoxy Composite Subjected to Repeated Impacts

Abstract

The comparative performance of repeatedly low mass pendulum impacted glass-epoxy (G-E) composites without and with the inclusion of either two or three (sheet) layers of flexible foam at the mid-region of the laminate is reported. Using square cross section specimens, the orientation of the test coupon was altered with respect to the impact direction such that in one case the G-E part, and the foam layers, constituting the system, were lying parallel (edgewise) and in the second case perpendicular (flatwise). The features of impact tested coupons, observed through macroscopy, were correlated with the mechanical data.

Keywords

impact glass-epoxy foam macroscopy

Get full access to this article

View all access options for this article.

References

1. Marshall, A. C. 1991. Intl. Encyclopedia of Composite Materials, S. M. Lee , ed., New York: VCH Publishers Inc., 1:488-488.

2. Weismann-Berman, D. 1991. Intl. Encyclopedia of Composite Materials, S. M. Lee , ed., New York: VCH Publishers, Inc., 6:445-445.

3. Venkatraman, S. and Kishore . 1997. J. Reinforced Plastics and Composites, 16:618-618.

4. Ramanathan, R. and Kishore . 1995. Proceedings of Tenth Intl. Conference on Composite Materials, A. Poursartip and K. Street , eds., The Tenth International Composite Materials Society, Whistler, Vancouver, BC, Canada, 5:695-695.

5. Prichard, J. C. and P. J. Hogg . 1990. Composites, 21:503-503.

6. Wyrick, D. A. and D. F. Adams . 1992. Composite Mater., 22:749-749.

7. Kaushal, S. and Kishore . 1992. J. Mater. Sci. Letts., 11:86-86.

8. 1988. Handbook of Plastics Test Methods, 3rd edition, R. P. Brown , ed., Longman Scientific and Technical in association with Plastics and Rubber Institute, Longman Scientific and Technical Group, Harlow, Essex, England.