Failure Prediction of Woven Fabric Composites after Deformations Induced by Forming

Abstract

Polymer reinforced by woven fabrics is probably the most common type of composite used in structural applications such as aircraft, boats, reservoirs, pressure vessels, etc. Woven fabrics offer many advantages in terms of manipulative requirements, including dimensional stability, good conformability, and deep-draw shape ability. In many applications, when the part geometry has a double curvature, the forming process usually results in significant in-plane shear deformation of the interlaced yams and the fabric composite becomes a non-orthogonal structure. The existing models proposed for orthogonal fabrics are unable to predict the thermo-elastic properties and the strengths of the deformed fabric structure (non-orthogonal structure). Recently, a new model, called the sub-plies model, has been proposed for the characterization of thermo-elastic properties of any deformed woven fabric composites. In this model, a woven fabric is divided into four fictional unidirectional sub-plies. The model allows determination of the thermo-elastic properties of deformed fabric composites (non-orthogonal structure) and direct use of layered shell elements in finite element codes. This paper presents the results of a study on the application of the sub-plies model in the prediction of tensile and compressive strengths of orthogonal and deformed graphite/epoxy woven-fabric composites. A special procedure is also proposed to measure the effect of fiber undulation on the mechanical properties of the constituent fictional plies. The equivalent coefficients of the on-axis tensile and compressive strengths of the constituent plies, determined by the proposed method, are applied to the maximum strain and quadratic criteria to predict the failure envelop of the composite. Tensile and compressive tests on specimens made of 8-harness satin and plain weave fabric composites were carried out to verify the proposed approach. The fabric structure of the test specimens was deformed by shearing to various angles between the interlaced yams before molding. The results show that prediction of tensile and compressive strengths by the sub-plies model and the quadratic criterion is in good agreement with experimental data.

Get full access to this article

View all access options for this article.

References

1. Ishikawa, T. and T.-W. Chou . 1982. "Stiffness and Strength Behavior of Woven Fabric Composites," Journal of Material Science, 17:3211-3220.

2. Ishikawa, T. and T.-W. Chou . 1982. "Stiffness and Strength Properties of Woven Composites," Proceeding of the 4th International Conference on Composite Materials, 4:489-496.

3. Ishikawa, T. and T.-W. Chou . 1983. "In-Plane Thermal Expansion and Thermal Bending Coefficients of Fabric Composites," J. Compos. Mater., Vol. 17, pp. 92-104.

4. Chou, T.-W. and T. Ishikawa . 1989. "Analysis and Modeling of Two Dimensional Fabric Composites," In Textile Structural Composites, Composites Materials Series, T.-W. Chou and F. K. Ko , R. B. Pipes , Series Ed., Elsevier, New York, 3:209-264.

5. Naik, N. K. , P. S. Shembekar and M. V. Hosur . 1991. "Failure Behavior of Woven Fabric Composites," Journal of Composites Technology and Research, 13:107-116.

6. Reifsnider, K. L. and F. Mirzadeh . 1988

"Compressive Strength and Mode of Failure of 8H celion300/PMR 15 Woven Composite Materials,"

Journal of Composites Technology and Research, 10:156-164.

7. Laroche, D. and T. Vu-Khanh . 1992. "Modeling of the Forming of Complex Parts from Fabric Composites," In Development and Design with Advanced Materials, S. V. Hoa (Ed.), Elsevier Science Publishers B.V., North Holland, pp. 223-262.

8. Laroche, D. and T. Vu-Khanh . 1993. "Modeling of the Thermo-Elastic Properties of Woven Fabric Composites in Complex Shapes," Composite Materials:Testing and Design, ASTM STP 1206, pp. 386-414.

9. Vu-Khanh, T. and B. Liu . 1995. "Prediction of Fiber Rearrangement and Thermal Expansion Behavior of Deformed Woven Fabric Laminates," Composite Science & Technology, 53:183-191.

10.

10. Vu-Khanh, T. and B. Liu . 1994. "Prediction of Thermal Expansion Behaviour of Deformed Woven Fabric Laminates," Proc Fifth International Conference on Marine Application of Composite Materials, MACM-5, Melbourne, Florida, April 18-20, pp. E1-E18.

11.

11. Vu-Khanh, T. and B. Liu . 1997. "Characterization of Thermo-Elastic Behaviour of Deformed Woven Fabric Composites at Elevated Temperatures," Science & Engineering of Composite Materials, 6:51-62.

12.

12. Lefebvre, D. , S. Archambault , T. Vu-Khanh and Y. Simard . 1993. "Compression Strength of Unidirectional CFRP Composites," Proc. Second Canadian International Composites Conference, CANCOM '93, Ottawa, Canada, September 27-29, 1993, W. Wallace , S. V. How , R. Gauvin (Eds.), pp. 659-666.

13.

13. Tsai, S. W. 1988. "Composites Design," Fourth edition, Think Composites, Dayton, Ohio.

14.

14. Petit, P. H. and M. E. Waddoups . 1969. "A Method of Predicting the Nonlinear Behavior of Laminated Composites," Journal of Composite Materials, 3:2-20.

15.

15. Ohira, H. and N. Uda . 1985. "Knee Point and Post-Failure Behavior of Some Laminated Composites Subjected to Uniaxial Tension," In Recent Advances in Composites in the United States and Japan, ASTM STP 864, J. R. Vinson and M. Taya , Eds., American Society for Testing and Materials, Philadelphia, pp. 110-127.

16.

16. Wang, H. , and T. Vu-Khanh . 1994. "Damage Extension in Carbon Fiber/PEEK Crossply Laminates under Low Velocity Impact," Journal of Composite Materials, 28:684-707.

17.

17. Hercules . 1989. "Hercules Prepreg Tape Materials Characterization Data Package," Composite Products Group.

18.

18. Hercules . 1985. "Graphite Prepreg Tape and Fabric Module," Magnamite, Aerospace Products Group.

19.

19. Roy, A. K. 1996. "In Situ Damage Observation and Failure in Model Laminates Containing Planar Yarn Crimping of Woven Composite," Mech. Compos. Mater Structures, Vol. 3, pp. 101-117.

20.

20. Roy, A. K. 1997. "In-Situ Damage Evolution in Unbalanced Fabric Composites and Model Composites of One Directional Crimping:A Comparative Study," Proceedings of the American Society for Composites, Twelfth Technical Conference, Dearborn, Michigan, October 6-8, pp. 326-334.

21.

21. Nguyen-Hoa, H. and T. Vu-Khanh . 1998. "Prediction of Failure in Unsaturated Polyester Reinforced by Plain Weave Glass Fabric," Proc. Canada-Japan Workshop on Composites, Montreal, Quebec, August 19-21, pp. 224-231.