A thermodynamic analysis was performed to determine whether it is suitable to predict the heavy metal (HM) speciation during the Municipal Solid Waste Incineration process. The fate of several selected metals (Cd, Pb, Zn, Cr, Hg, As, Cu, Co, Ni) during incineration was theoretically investigated. The equilibrium analysis predicted the metal partitioning during incineration and determined the impact of operating conditions (temperature and gas composition) on their speciation. The study of the gas composition influence was based on the effects of the contents of oxygen (reducing or oxidising conditions) and chlorine on the HM partitioning. The theoretical HM speciation which was calculated in a complex system representing a burning sample of Municipal Solid Waste can explain the real partitioning (obtained from literature results) of all metals among the various ashes except for Pb. Then, the results of the thermodynamic study were compared with those of characterisation of real incinerator residues, using complementary techniques (chemical extraction series and X-ray micro-analyses). These analysis were performed to determine experimentally the speciation of the three representative metals Cr, Pb, and Zn. The agreement is good for Cr and Zn but not for Pb again, which mainly shows unleachable chemical speciations in the residues. Pb tends to remain in the bottom ash whereas thermodynamics often predicts its complete volatilisation under chlorides, and thus its presence exclusively in fly ash.
ADEME, La composition des ordures ménagères en France, (Composition of municipal wastes in France), Données et Références, 1998.
2.
Barton R.G., Maly P.M., Clark W.D., & Seeker W.R., (1988), Prediction of the fate of toxic metals in waste incinerators, ASME, 13th National Waste Processing Conference, 379-386.
3.
Belevi H., & Moench H., (2000), Factors determining the element behavior in municipal solid waste incinerators. 1. Field studies, Environ. Sci. Technol., 34, 2501-2506.
4.
Belevi H., & Langmeier M., (2000), Factors determining the element behavior in municipal solid waste incinerators. 2. Laboratory experiments, Environ. Sci. Technol., 34, 2507-2512.
5.
Brunner P.H., & Mönch H., (1986), The flux of metals through municipal solid waste incinerators, Waste Management & Research, 4, 105-119.
6.
Chandler A.J., Eighmy T.T., Hartlén J., Hjelmar O., Kosson D.S., Sawell S.E., Van der Sloot H.A., Vehlow J., (1997), Municipal Solid Waste Incinerator Residues, The International Ash Working Group (IAWG), Elsevier Science B.V., Amsterdam.
7.
Cheynet B., (1988 a), Complex chemical equilibria calculation with the THERMODATA system, Computer Software in Chemical and Extractive Metallurgy, Proc. Metal. Soc. of CIM, Pergamon Press, 11, 31-44.
8.
Cheynet B., (1988 b), THERMODATA: on-line integrated information system for inorganic and metallurgical thermodynamics, Computerised Metallurgical Databases, The Metallurgical Society, Inc., Warrendale, PA, USA, 29-40.
9.
Clapp T.L., Magee J.F., Ahlert R.C., & Kosson D.S., (1988), Municipal solid waste composition and the behavior of metals in incinerator ashes, Environmental Progress, 7(1), 22-30.
10.
Clozel B., & Legendre O., (1995), Caractérisation minéralogique et cristallochimique de vitrifiats, (Mineralogical and cristallochemical characterisation of vitrified matters), BRGM, in International Congress on Waste Solidification and Stabilisation Processes (Eds. Cases et Thomas), Nancy.
11.
Desroches-Ducarne E., Marty E., Martin G., & Delfosse L., (1998), Co-combustion of coal and municipal solid waste in a circulating fluidised bed, Fuel, 77(12), 1311-1315.
12.
Durlak S.K., Biswas P., & Shi J., (1997), Equilibrium analysis of the affect of temperature, moisture and sodium content on heavy metal emissions from municipal solid waste incinerators, Journal of Hazardous Materials, 56, 1-20.
13.
Frandsen F., Dam-Johansen K., & Rasmussen P., (1994), Trace elements from combustion and gasification of coal - An equilibrium approach, Prog. Energy Combust. Sci., 20, 115-138.
14.
Gagnepain B., (1998), Spéciation des métaux lourds dans les résidus solides d’usines d’incinération d’ordures ménagères et contribution à l’interprétation des processus de vaporisation, (Heavy metal speciation in solid household waste incineration residues and contribution to the interpretation of volatilisation processes), Thèse de doctorat en Sciences de l’Ingénieur, Université de Perpignan.
15.
Griepink B., & Muntau H., (1987), The certification of the contents of Cd, Co, Cu, Fe, Ni, Pb, Zn, Sb, Se, Tl and Cr in a city waste incineration ash, Fresenius Z Anal. Chem., 326, 414-418.
16.
Ho T.C., Lee H.T., Shiao C.C., Hopper J.R., & Bostick W.D., (1995), Metal behavior during fluidised bed thermal treatment of soil, Waste Management, 15(5/6), 325-334.
17.
Jakob A., Stucki S., & Kuhn P., (1995), Evaporation of heavy metals during the heat treatment of municipal solid waste incinerator fly ash, Environ. Sci. Technol., 29, 2429-2436.
18.
Kersten M., & Förstner U., (1994), Speciation of trace metals in sediments and combustion waste, Chemical Speciation in the Environment, A.M. Ure & C.M. Davidson (Ed.), 246-247.
19.
Kirby C.S. & Rimstidt J.D., (1993), Mineralogy and surface properties of municipal solid waste ash, Environ. Sci. Technol, 27, 652-660.
20.
Le Goux J.Y., & Le Douce C., (1995), L’incinération des Déchets Ménagers, (Household Waste Incineration), Ed. Economica, Paris.
21.
Linak W.P. & Wendt J.O.L., (1993), Toxic metal emissions from incineration: mechanisms and control, Prog. Energy Combust. Sci., 19, 145-185.
22.
Morf L.S., Brunner P.H., & Spaun S., (2000), Effect of operating conditions and input variations on the partitioning of metals in a municipal solid waste incinerator,, Waste Management & Research, 18, 4-15.
23.
Owens T.M., Wu C.Y., & Biswas P., (1995), An equilibrium analysis for reaction of metal compounds with sorbents in high temperature systems, Chem. Eng. Comm., 133, 31-52.
24.
Pfrang-Stotz G., & Schneider J., (1995), Comparative studies of waste incineration bottom ashes from various grate and firing systems, conducted with respect to mineralogical and geochemical methods of examination, Waste Management & Research, 13, 273-292.
25.
Reimann D.O., (1989), Heavy metals in domestic refuse and their distribution in incinerator residues, Waste Management & Research, 7, 57-62.
26.
Ruth L.A., (1998), Energy from municipal solid waste: a comparison with coal combustion technology, Prog. Energy Combust. Sci., 24, 545-564.
27.
Tessier A., Campbell P.G.C., & Bisson M., (1979), Sequential extraction procedure for the speciation of particulate trace metals, Analytical Chemistry, 51(7), 844-851.
28.
Verhulst D., Buekens A., Spencer P., & Eriksson G., (1996), Thermodynamic behavior of metal chlorides and sulfates under the conditions of incineration furnaces, Environ. Sci. Technol., 30, 50-56.
29.
WASTE program, (1993), Waste analysis, sampling, testing and evaluation program: final report of the mass burn MSW incineration study (Buraby, B.C.), report prepared for environment Canada, U.S. EPA and the International lead zinc research organisation, Vols. 1-4.
30.
Wey M.Y., Hwang J.H., & Chen J.C., (1996), The behavior of heavy metal Cr, Pb and Cd during waste incineration in fluidised bed under various chlorine additives, Journal of Chemical Engineering of Japan, 29(3), 494-500.
31.
Wu C.Y., & Biswas P., (1993), An equilibrium analysis to determine the speciation of metals in an incinerator, Combust. Flame, 93, 31-41.
32.
Yan R., Gauthier D., Flamant G., & Badie J.M., (1999), Thermodynamic study of the behaviour of minor coal elements and their affinities to sulphur during coal combustion, Fuel, (15), 1817-1829.
