Incorporation of Sewage Sludge in Clay Brick and its Characterization

Abstract

This study reports the use of sewage sludge generated from sewage treatment plant (STP) as raw material in a clay brick-making process. The physico-chemical and mineralogical characterization of the sewage sludge and clay were carried out in order to identify the major technological constraints and to define the sludge pretreatment requirements if necessary. Moreover, the effects on processing conditions and/or on changes of typical final characteristics are also evaluated. Bricks were produced with sewage sludge additions ranging from 10 to 40% by dry weight. The texture and finishing of the surface of sludge-amended clay bricks were rather poor. As for the physical and chemical properties, bricks with a sludge content of up to 40 wt.% were capable of meeting the relevant technical standards. However, bricks with more than 30 wt.% sludge addition are not recommended for use since they are brittle and easily broken even when handled gently. A tendency for a general degradation of brick properties with sludge additions was observed due to its refractory nature. Therefore, sludge bricks of this nature are only suitable for use as common bricks, which are normally not exposed to view, because of poor surface finishing.

Keywords

Sewage sludge utilization clay brick production physico-chemical mineralogical characterization wmr 690-4

Get full access to this article

View all access options for this article.

References

Alleman, J.E. (1983): Beneficial Use of Sludge in Building Components, Final Report—Grant No. ISP-8021357, p. 101. National Science Foundation, West Lafayette, IN .

Alleman, J.E. , Bryan, E.H. , Stumm, T.A. , Marlow, W.W. & Hocevar, R.C. (1990): Sludge-amended brick production: applicability for metal-laden residues . Water Science & Technology, 22(12), 309-317 .

Ang, K.H. (1982): Use of Sludge as a Construction Material. Undergraduate Thesis, Dept. of Civil Engineering, p. 69, National University of Singapore, Singapore.

Brownell, W.E. (1976): Structural Clay Products, p. 231. Springer-Verlag, New York .

BS 1377 . (1990): Methods of Test for Soils for Civil Engineering Purposes. Part 2: Classification Tests. British Standards Institution, London, England .

BS 1377 . (1990): Methods of Test for Soils for Civil Engineering Purposes. Part 4: Compaction-Related Tests. British Standards Institution, London, England .

Churchill, W.M. (1994): Aspects of sewage sludge utilization and its impact on brickmaking . British Ceramic Transactions, 93(4), 161-164 .

Craig, R.F. (1992): Soil Mechanics, pp. 1-36. Chapman & Hall, London .

ILO/UNIDO (International Labor Office & the United Nations Industrial Development Organization) . (1984): Small-scale Brickmaking—Technical Memorandum No. 6. 210 pp.

10.

Livingston, R.A. (1988): Geochemical methods applied to the reproduction of handmolded brick. In: Brick and Block Masonry—Volume 1. de Courcy, J.W. (ed.) pp. 83-91. Elsevier Applied Science .

11.

McNally, G.H. (1998): Soil and Rock Construction Materials, pp. 291-310. Routledge, London .

12.

Prentice, J.E. (1990): Geology of Construction Materials. pp. 139-170. Chapman & Hall, London .

13.

Slim, J.A. & Wakefield, R.W. (1991): The utilisation of sewage sludge in the manufacture of clay bricks . Water SA, 17, 197-202 .

14.

Tay, J.-H. (1987): Bricks manufactured from sludge . Journal of Environmental Engineering. 113, 278-284 .

15.

Tay, J.-H. & Show, K.-Y. (1997) Resource recovery of sludge as a building and construction material—a future trend in sludge management . Water Science & Technology, 36(11), 259-266 .