Utilization of gold tailings as an additive in Portland cement

Abstract

Mine tailings are formed as an industrial waste during coal and ore mining and processing. In the investigated process, following the extraction of gold from the ore, the remaining tailings are subjected to a two-stage chemical treatment in order to destroy the free cyanide and to stabilize and coagulate heavy metals prior to discharge into the tailings pond. The aim of this study was the investigation of the feasibility of utilization of the tailings as an additive material in Portland cement production. For this purpose, the effects of the tailings on the compressive strength properties of the ordinary Portland cement were investigated. Chemical and physical properties, mineralogical composition, particle size distribution and microstructure of the tailings were determined by Fourier transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD), particle size analyzer (Mastersizer) and scanning electron microscope (SEM). Following the characterization of the tailings, cement mortars were prepared by intergrinding Portland cement with dried tailings. Composition of the cement clinkers were adjusted to contain 5, 15, 25% (wt/wt) dried tailings and also silica fume and fly ash samples (C and F type) were added to clinker in different ratios. The mortars produced with different amounts of tailings, silica fume, fly ashes and also mixtures of them were tested for compressive strength values after 2, 7, 28 and 56 days according to the European Standard (EN 196-1). The results indicated that gold tailings up to 25% in clinker could be beneficially used as an additive in Portland cement production. It is suggested that the gold tailings used in the cement are blended with silica fume and C-type fly ash to obtain higher compressive strength values.

Keywords

Tailings gold processing fly ash silica fume Portland cement additive wmr 871-5

Get full access to this article

View all access options for this article.

References

ASTM Standard, ASTM C618, Fly ash for use as a mineral admixture in Portland cement concrete..

Cukrowska, E. M. , Govender, K. & Vilijoen, M. (2004) Ion mobility based on column leaching of South African gold tailings dam with chemo-metric evaluation . Chemosphere, 56, 39-50 .

Çelik, Ö. (2004) Utilization of the industrial wastes in building sectors. PhD thesis, Department of Chemical Engineering, Yildiz Technical University, Istanbul, Turkey.

Çelik, Ö. , Elbeyli, I. Y. , Piskin, M. & Piskin, S. (2004) The effects of various industrial wastes on compressive strength properties of Portland cement . In Proc. Environmental Issues and Waste Management in Energy and Mineral Production, 17-20 May, Antalya, Turkey, pp. 603-607 . Atilim University, Ankara, Turkey.

Erdogdu, K. & Türker, F. (1998) Effects of fly ash particle size on strength of Portland cement fly ash mortars . Cement and Concrete Research, 28, 1217-1222 .

European Standard, EN 196-1, Methods of testing cement: Part 1. Determination of strength.

Karahan, S. & Önal, G. (2003) BAT practice at Ovacik gold mine . In: Proceedings of X Balkan Mineral Processing Congress, Mineral Processing in the 21st century, Varna, Bulgaria, 15-20 June. University of Mining and Geology, Bulgaria.

Malhotra, V. M. & Carette, G. G. (1982) Silica fume . Concrete Construction, 27, 443, 445-446 .

Mehta, P. K. (1985) Influence of fly ash characteristics on the strength of Portland-fly ash mixtures . Cement & Concrete Research, 15, 669-674 .

10.

Monze, J. , Paya, J. & Peris-Mora, E. (1994) A preliminary study of fly ash granulometric influence on mortar strength . Cement & Concrete Research, 24, 791-796 .

11.

Özdemir, O. , Erhan, B. & Çelik, M. S. (2001) Separation of pozzolanic material from lignitic fly ash of Tuncbilek power station . In: International Ash Utilization Symposium, Center for Applied Energy Research, University of Kentucky, USA.

12.

Paktunc, D. , Foster, A. , Heald, S. & Laflamme, G. (2004) Speciation and characterization of arsenic in gold ores and cyanidation tailings using X-ray absorption spectroscopy . Geochimica et Cosmochimica Acta, 68(5), 969-983 .

13.

Thomas, M. D. A. , Sheata, M. H. , Shashiprakash, S. G. , Hopkins, D. S. & Cail, K. (1999) Use of ternary cementitious systems containing silica fume and fly ash in concrete . Cement and Concrete Research, 29, 1207-1214 .

14.

Tokyay, M. & Erdogan, K. (1998) Characterization of fly ash which are obtained from thermal power plants in Turkey , Journal of Turkish Cement Manufacturers’ Association, August issue, pp. 40 .

15.

Tütünlü, F. & Atalay, Ü . (2001) Utilization of fly ash in manufacturing of building bricks . In: International Ash Utilization Symposium, Center for Applied Energy Research, University of Kentucky, USA.

16.

Yeginobali, A. (2002) The usage of silica fume with cement in concrete . Journal of Turkish Cement Manufacturers’ Association, January issue, pp. 17 .

17.

Zagury, G. , Oudjehani, K. & Deschenes, L. (2004) Characterization and availability of cyanide in solid mine tailings from gold extraction plants . Science of the Total Environment, 320, 211-224 .