In the last few years, mineral extraction and processing industries have been identified as sources of environmental contamination and pollution. The kaolin processing industry around the world generates large amounts of waste materials. The present study evaluated the suitability of kaolin processing waste as an alternative source of ceramic raw material for the production of ceramic tiles and dense mullite bodies. Several formulations were prepared and sintered at different temperatures. The sintered samples were characterized to determine their porosity, water absorption, firing shrinkage and mechanical strength. The fired samples were microstructurally analysed by X-ray diffraction. The results indicated that ceramic tile formulations containing up to 60% of waste could be used for the production of tiles with low water absorption (~ 0.5%) and low sintering temperature (1150 °C). Mullite formulations with more than 40% of kaolin waste could be used in the production of bodies with high strength, of about 75 MPa, which can be used as refractory materials.
Abdrakhimova, E.S. & Abdrakhimov, V.Z. (2006) Optimization of the content of light fraction ash in ceramic tile mixtures, Glass and Ceramics, 63, 95-96.
2.
Acchar, W., Vieira, F.A. & Segadães A.M. (2006) Using ornamental stone cutting rejects as raw materials for red clay ceramic products: Properties and microstructure development. Materials Science and Engineering A, 435-436, 606-610.
3.
Almeida, R.R. (2006) Reciclagem de resíduo de caulim e granito para produção de blocos e telhas (Recycling of kaolin processing and granite sawing wastes for the production of bricks and roof tiles). Master Thesis, Universidade Federal de Campina Grande, Campina Grande .
4.
Andreola, F., Barbieri, L., Corradi, A., Lancellotti, I. & Manfredini, T. (2002) Utilisation of municipal incinerator grate slag for manufacturing porcelainized stoneware tiles manufacturing . Journal of the European Ceramic Society, 22, 1457-1462.
5.
ASTM C-373-88 (2006) Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products. ASTM International , West Conshohocken, PA, USA.
6.
Baruzzo, D., Minichelli, D., Bruckner, S., Fedrizzi, L., Bachiorrini, A. & Maschio, S. (2006) Possible production of ceramic tiles from marine dredging spoils alone and mixed with other waste materials. Journal of Hazardous Materials B, 134, 202-210.
7.
Basegio, T., Berutti, F., Bernardes, A. & Bergmann C.P. (2002) Environmental and technical aspects of the utilisation of tannery sludge as a raw material for clay products. Journal of the European Ceramic Society, 22, 2251-2259.
8.
Basegio, T., Haas, C., Pokorny, A., Bernardes, A.M. & Bergmann, C.P. (2006) Production of materials with alumina and ashes from incineration of chromium tanned leather shavings: Environmental and technical aspects. Journal of Hazardous Materials B, 137, 1156-1164.
9.
Bragança, S.R. & Bergmann, C.P. (2004) Traditional and glass powder porcelain: Technical and microstructure analysis. Journal of the European Ceramic Society, 24, 2383-2388
10.
Bragança, S.R., Vicenzi, J., Guerino, K. & Bergmann, C.P. (2006) Recycling of iron foundry sand and glass waste as raw material for production of whiteware. Waste Management & Research, 24, 60-66.
11.
Chen, C.Y. & Tuan, W.H. (2001) The processing of kaolin powder compact. Ceramics International, 27, 795-800.
12.
Chen, C.Y., Lan, G.S. & Tuan, W.H. (2000a) Preparation of mullite by the reaction sintering of kaolinite and alumina. Journal of the European Ceramic Society, 20, 2519-2525.
13.
Chen, C.Y., Lan, G.S. & Tuan, W.H. (2000b) Microstructural evolution of mullite during the sintering of kaolin powder compacts. Ceramics International , 26, 715-720.
14.
Dana, K., Dey, J. & Das, S.K. (2005) Synergistic effect of fly ash and blast furnace slag on the mechanical strength of traditional porcelain tiles. Ceramics International, 31, 147-152.
15.
Hernández-Crespo, M.S. & Rincón, J.Ma. (2001) New porcelainized stoneware materials obtained by recycling of MSW incinerator fly ashes and granite sawing residues. Ceramics International, 27, 713- 720.
16.
Kingery, D.W., Bowen, H.K. & Uhlmann, D.R. (1976) Introduction to Ceramics. pp. 197,534-535. John Wiley & Sons Inc, New York.
17.
Menezes, R.R., Ferreira, H.S., Neves, G.A. & Ferreira, H.C. (2002a) Uso de rejeitos de granitos como matérias-primas cerâmicas (Use of granite sawing wastes as ceramic raw-materials) . Cerâmica, 48, 1-9. ( www.scielo.br)
18.
Menezes, R.R., Neves, G.A. & Ferreira, H.C. (2002b) O estado da arte sobre o uso de resíduos como matérias-primas cerâmicas alternativas (State of art on the use of wastes as alternative ceramic raw materials). Revista Brasileira de Engenharia Agrícola e Ambiental, 6, 303-313.
19.
Menezes, R.R., Neves, G.A., Ferreira, H.C. & Lira, H.L. (2002c) Recycling of granite industry waste from the northeast region of Brazil. Environmental Management and Health, 13, 134-141.
20.
Menezes, R.R., Ferreira, H.S., Neves, G.A., Lira, H.L. & Ferreira, H.C. (2005) Use of granite sawing wastes in the production of ceramic bricks and tiles. Journal of the European Ceramic Society, 25, 1149- 1158.
21.
Menezes, R.R., Brasileiro, M.I., Santana, L.N.L., Neves, G.A., Lira, H.L. & Ferreira H.C. (2008) Utilization of kaolin processing waste for the production of porous ceramic bodies. Waste Management & Research, 26: 362-368.
22.
Monteiro, S.N., Peçanha, L.A. & Vieira, C.M.F. (2004) Reformulation of roofing tiles body with addition of granite waste from sawing operations. Journal of the European Ceramic Society, 24, 2349-2356.
23.
NBR 13818, Associação Brasileira de Normas Técnicas (ed.) (1997) Placas cerâmicas para revestimento - Especificações e métodos de ensaios (Ceramic tiles - Specification and methods of tests) . Associação Brasileira de Normas Técnicas, Rio de Janeiro.
24.
Oliveira, G.E. & Holanda, J.N.F. (2004) Use of mix of clay/solid waste from steel works for civil construction materials. Waste Management & Research, 22, 358-363.
25.
Ozel, E., Turan, S., Çoruh, S. & Ergun, O.N. (2006) Production of brown and black pigments by using flotation waste from copper slag. Waste Management & Research , 24, 125-133.
26.
Pinatti, D.G., Conte, R.A., Borlinic, M.C., Santos, B.C., Oliveira, I., Vieira, C.M.F. & Monteiro, S.N. (2005) Incorporation of the ash from cellulignin into vitrified ceramic tiles. Journal of the European Ceramic Society, 26, 305-310.
27.
Raupp-Pereira, F., Hotza, O., Segadães, A.M. & Labrincha, J.A. (2006) Ceramic formulations prepared with industrial wastes and natural sub-products. Ceramics International, 32, 173-179.
28.
Sánchez de Rojas, M.I., Marin, F., Rivera, J. & Frías, M. (2006) Morphology and properties in blended cements with ceramic wastes as a pozzolanic material. Journal of the American Ceramic Society, 89, 3701-3705.
29.
Souza, L.P.de F. & Mansur, H.S. (2004) Production and characterization of ceramic pieces obtained by slip casting using powder wastes. Journal of Materials Processing Technology, 145, 14-20.
30.
Souza, M.F. de & Yamamoto, J. (1999) Mulita a partir de hidróxido de alumínio e de sílica da casca de Arroz (Mullite synthesised from aluminium hydroxide and silica from rice hull). Cerâmica, 45, 1-14.
31.
Torres, P., Fernandes, H.R., Agathopoulos, S., Tulyaganov, D.U. & Ferreira, J.M.F. (2004) Incorporation of granite cutting sludge in industrial porcelain tile formulations. Journal of the European Ceramic Society, 24, 3177-3185.
32.
Tulyaganov, D.U., Olhero, S.M.H., Ribeiro, M.J., Ferreira, J.M. & Labrincha, J.A. (2002) Mullite-alumina refractory ceramics obtained from mixtures of natural common materials and recycled Al-rich anodizing sludge. Journal of Materials Syntheses and Processing , 10, 311-318.
33.
Vieira, C.M.F., Soares, T.M., Sánchez, R. & Monteiro, S.N. (2004) Incorporation of granite waste in red ceramics. Materials Science and Engineering A , 373, 115-121.
34.
Youssef, N.F., Abadir, M.F. & Shaterc, M.A.O. (1998) Utilization of soda glass (cullet) in the manufacture of wall and floor tiles, Journal of the European Ceramic Society, 18, 1121-1121.
35.
Zanetti, M.C. & Fiore, S. (2003) Foundry waste recycling in moulding operations and in the ceramic industry. Waste Management & Research , 21, 235-242.
