Waste electrical and electronic equipment (WEEE) contains gold in low but from an environmental and economic point of view relevant concentration. After collection, WEEE is pre-processed in order to generate appropriate material fractions that are sent to the subsequent end-processing stages (recovery, reuse or disposal). The goal of this research is to quantify the overall recovery rates of pre-processing technologies used in Germany for the reference year 2007. To achieve this goal, facilities operating in Germany were listed and classified according to the technology they apply. Information on their processing capacity was gathered by evaluating statistical databases. Based on a literature review of experimental results for gold recovery rates of different pre-processing technologies, the German overall recovery rate of gold at the pre-processing level was quantified depending on the characteristics of the treated WEEE. The results reveal that — depending on the equipment groups — pre-processing recovery rates of gold of 29 to 61% are achieved in Germany. Some practical recommendations to reduce the losses during pre-processing could be formulated. Defining mass-based recovery targets in the legislation does not set incentives to recover trace elements. Instead, the priorities for recycling could be defined based on other parameters like the environmental impacts of the materials. The implementation of measures to reduce the gold losses would also improve the recovery of several other non-ferrous metals like tin, nickel, and palladium.
Aida (2009) Informationsplattform Abfall in NRW [Information platform Waste in North Rhine-Westfalia]. From NRW Ministry for Environment and Nature Protection, Agriculture and Consumer Protection: http://www.nrw-luawebapps.de/aida/ (accessed 24 July 2009).
2.
Bolland T. ( 2009) Erstbehandlungsanlagen für Elektro- und Elektronikaltgeräte - eine Stoffstromanalyse [First treatment facilities for WEEE - a material flow analysis]. Diploma thesis, Technische Universität Berlin. Berlin, Germany.
3.
Chancerel P. ( 2010) Substance Flow Analysis of the Recycling of Small Waste Electrical And Electronic Equipment - An Assessment of the Recovery of Gold and Palladium. Doctoral thesis, Technische Universität Berlin, Göttingen, Germany: Cuvillier Verlag.
4.
Chancerel P., Rotter VS ( 2008) Stoffstromanalyse und Modellierung von mechanischen Aufbereitungsprozessen fur Elektro- und Elektronikaltgeräte [Substance flow analysis and modeling of mechanical pre-processing for waste electrical and electronic equipment] . In: Proc. of Abfallforschungstage . Göttingen, Germany.
5.
Chancerel P., Meskers CEM, Hagelüken C., and Rotter VS ( 2009) Assessment of precious metal flows during pre-processing of waste electrical and electronic equipment. Journal of Industrial Ecology13: 791-810.
6.
COM (Commission of the European Communities) ( 2005) Taking sustainable use of resources forward: A Thematic Strategy on the prevention and recycling of waste. COM( 2005) 666. Commission of the European Communities, Brussels, Belgium.
7.
Cui J., Forssberg E. ( 2003) Mechanical recycling of waste electric and electronic equipment: a review. Journal of Hazardous MaterialsB99: 243-263.
8.
Faulstich M., Baron M. ( 2008) Abfallwirtschaft in Deutschland 2008 [Waste management in Germany in 2008]. Müllhandbuch Band1, article 0148.01.
9.
Gmünder S. ( 2007) Recycling - From Waste to Resource - Assessment of Optimal Manual Dismantling Depth of a Desktop PC in China Based on Eco-efficiency Calculations. Diploma thesis, EidgenössischeTechnische HochschuleZürich, Zürich , Switzerland.
10.
Hagelüken C. ( 2006) Improving metal returns and eco-efficiency in electronics recycling - a holistic approach for interface optimisation between pre-processing and integrated metals smelting and refining. In: Proceedings of the IEEE International Symposium on Electronics & the Environment, 811 May 2006, San Francisco, USA, pp. 218-223, IEEE : Scottsdale, AZ, USA.
11.
Huisman J. ( 2003) The QWERTY/EE concept, Quantifying Recyclability and Eco-Efficiency for End-of-Life Treatment of Consumer Electronic Products . Doctoral thesis, Delft University of Technology, Delft, the Netherlands.
12.
Huisman J. ( 2004) QWERTY and Eco-Efficiency Analysis on Cellular Phone Treatment in Sweden. The Eco-efficiency of the Direct Smelter Route versus Mandatory Disassembly of Printed Circuit Boards. Stockholm, Sweden.
13.
Huisman J., Magalini F., Kuehr R., Maurer C., Delgado C., Artim E., and Stevels ALN ( 2007) 2008 Review of Directive 2002/96 on Waste Electrical and Electronic Equipment (WEEE). Bonn, Germany: United Nations University.
14.
Keller M. ( 2006) Assessment of Gold Recovery Processes in Bangalore, India and Evaluation of an Alternative Recycling Path for Printed Wiring Boards. Diploma thesis, EidgenössischeTechnische HochschuleZürich, Zürich , Switzerland.
15.
Koehnlechner R. ( 2008) E-waste in Canada - Gold Diggers in E-Waste. RecyclingMagazin18: 6-11.
16.
Leonhardt E. ( 2007) Geregelte Verantwortungslosigkeit? Erfahrungen mit der Produktverantwortung bei Elektro(nik)-Geräten aus Sicht eines Umweltund Verbraucherschutzverbandes [Regulated irresponsibility? Experience with producer responsibility for EEE from the perspective of an association for environmental and consumer protection]. Deutsche Umwelthilfe : www.ssl.duh.de/1141.html (accessed 28 July 2009).
17.
Leroy P. ( 2008) Necessary harmony - Request for European Standards for WEEE treatment. Opinion. Recycling Magazine13, 16-17: www.recyclingmagazin.de/rmeng (accessed 5 April 2009).
18.
Malhotra SC ( 1985) Trends and opportunities in electronic scrap reclamation . Conservation & Recycling8: 327-333.
19.
Meskers CEM, Hagelüken C., Salhofer S., and Spitzbart M. ( 2009) Impact of pre-processing routes on precious metal recovery from PCs. In: Proc. of European Metallurgical Conference EMC 2009, 28 June-1 July 2009, Innsbruck, Austria, Clausthal Zellerfeld, Germany: GDMB Verlag.
20.
Middendorf A., Nissen NF, Griese H., Müller J., Potter H., Reichl H., and Stobbe I. ( 2000) The EE-Toolbox - a modular assessment system for the environmental optimisation of electronics. In; Proc. of the 2000 IEEE International Symposium on Electronics and the Environment, 8-10 May 2000, San Francisco, USA, IEEE: Denver, CO, USA.
21.
Reuter MA, Boin UMJ, Van Schaik A., Verhoef E., Heiskanen K., Yang Y., and Georgalli G. ( 2005) The Metrics of Material and Metal Ecology: Harmonizing the Resource, Technology and Environmental Cycles. Amsterdam , The Netherlands: Elsevier Science.
22.
Ritthoff M., Rohn H., and Liedtke C. ( 2002) Calculating MIPS: Resource Productivity of Products and Services. Wuppertal, Germany: Wuppertal Institute for Climate, Environment and Energy, Report Wuppertal Spezial 27e.
23.
Schill W.-P (2007) Incentives for Precious Metals Recycling in German WEEE Legislation - Strategies for Implementing Individual Producer Responsibility. Diploma thesis, Technische Universität Berlin. Berlin, Germany.
24.
Sepúlveda A., Schluep M., Renaud FG, Streicher M., Kuehr R., Hagelüken C., and Gerecke AC ( 2010) A review of the environmental fate and effects of hazardous substances released from electrical and electronic equipments during recycling: Examples from China and India. Environmental Impact Assessment Review30: 28-41.
25.
Shirahase T., Kida A., and Murakami S. ( 2007) Understanding the flows of metals in waste PC. In: Proc. of the Fourth NIES Workshop on E-waste, Tsukuba, Japan, 15-20, Tsukuba, Japan: NIES.
26.
Streicher-Porte M., Widmer R., Jain A., Bader HP, Scheidegger R., and Kytzia S. ( 2005) Key drivers of the e-scrap recycling system: Assessing and modelling e-scrap processing in the informal sector in Delhi. Environmental Impact Assessment Review25: 472-491.
27.
Tesar M., Öhlinger A. ( 2009) Elektroaltgerätebehandlung in Österreich - Zustandsbericht 2008 [WEEE treatment in Austria - Status 2008]. Bundesministeriums für Land- und Forstwirtschaft, Umwelt und Wasserwirtschaft. Vienna, Austria.
28.
UNEP (United Nations Environment Programme) ( 2005) E-waste, the hidden side of IT equipment’s manufacturing and use. Environment Alert Bulletin5. http://www.grid.unep.ch/product/publication/download/ew_ewaste.en.pdf (accessed 24 March 2010).
29.
Van Schaik A., Reuter MA ( 2009) Modellhaftes Recycling [Model-like recycling]. Recycling Magazin04: 26-29.
30.
Widmer R., Oswald-Krapf H., Sinha-Khetriwal D., Schnellmann M., and Böni H. ( 2005) Global perspectives on e-scrap. Environmental Impact Assessment Review25: 436-458.
31.
Willems B., Dewulf W., and Duflou JR ( 2006) Can large-scale disassembly be profitable? A linear programming approach to quantifying the turning point to make disassembly economically viable. International Journal of Production Research44: 1125-1146.
32.
Zhang S., Forssberg E. ( 1998) Mechanical recycling of electronics scrap- the current status and prospects. Waste Management & Research16: 119-128.
