Construction and demolition waste can contain considerable amounts of polyvinyl chloride (PVC). This paper describes a study of the recycling of PVC pipes collected from such waste materials. In a sorting facility for the specific disposal of construction and demolition waste, PVC was found to represent one-third of the plastics separated by workers. Pipes were sorted carefully to preclude any possible contamination by poly(ethylene terephthalate) (PET) found in the waste. The material was ground into two distinct particle sizes (final mesh of 12.7 and 8 mm), washed, dried and recycled. The average formulation of the pipes was determined based on ash content tests and used in the fabrication of a similar compound made mainly of virgin PVC. Samples of recycled pipes and of compound based on virgin material were subjected to tensile and impact tests and provided very similar results. These results are a good indication of the application potential of the recycled material and of the fact that longer grinding to obtain finer particles is not necessarily beneficial.
ABIQUIM (Associação Brasileira da Indústria Química) (2008) Anuário Brasileiro da Indústria Química 2007 [Brazilian Chemical Industry Yearbook 2007]. Brazil, Abiquim, São Paulo.
2.
ABNT (Associação Brasileira de Normas Técnicas) (2005) NM 84 Tubos e Conexões de PVC – Determinação do Teor de Cinzas - Método “A” [PVC Pipes and connections – Determination of Ash Content]. www.abnt.org.brAccessed 12 December 2010.
3.
ABNT (Associação Brasileira de Normas Técnicas) (2010) NBR 5688: Tubos e conexões de PVC-U para sistemas prediais de água pluvial, esgoto sanitário e ventilação – Requisitos [PVC-U pipes and connections for rainwater drainage, sewer and ventilation systems of buildings – Requisites]. www.abnt.org.br (accessed 12 December 2010).
4.
AlvesJPDRodolfoAJr (2006) Análise do Processo de Gelificação de Resinas e Compostos de PVC Suspensão [Analysis of the Gelification Process of Suspension PVC Resins and Compounds]. Polímeros: Ciência e Tecnologia16: 165–173.
5.
ASTM (American Society for Testing and Materials) (2006) Standard D 6110: Standard Test Method for Determining the Charpy impact resistance of notched specimens of plastics. www.astm.org (accessed 20 December 2010).
6.
ASTM (American Society for Testing and Materials) (2008) Standard D 531: Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste. www.astm.org (accessed 20 December 2010).
7.
ASTM (American Society for Testing and Materials) (2010) Standard D 638: Standard Test Method for Tensile Properties of Plastics. www.astm.org (accessed 20 December 2010).
8.
BegumRASiwarCPereiraJJJaafarAH (2009) Attitude and behavioral factors in waste management in the construction industry of Malaysia. Resources, Conservation and Recycling53: 321–328.
9.
BraunD (1999) Simple Methods for Identification of Plastics. Munich, Germany: Hanser Gardner Publications.
10.
BraunD (2002) Recycling of PVC. Progress in Polymer Science27: 2171–2195.
Da RochaCGSattlerMA (2009) A discussion on the reuse of building components in Brazil: An analysis of major social, economical and legal factors. Resources, Conservation and Recycling54: 104–112.
13.
Del RíoMIzquierdoPSalto-WeissI (2010) Sustainable construction: construction and demolition waste reconsidered. Waste Management & Research28: 118–129.
14.
GuzmánJSMarreroMDelgadoMVMde ArellanoAR (2009) A Spanish model for quantification and management of construction waste. Waste Management29: 2542–2548.
15.
KofoworolaOFGheewalaSH (2009) Estimation of construction waste generation and management in Thailand. Waste Management29: 731–738.
16.
ManciniSDNogueiraARKagoharaDASchwartzmannJASMattosT (2007) Composition of urban solid waste destined for sanitary landfills: the Case of Indaiatuba, SP, Brazil. Waste Management & Research25: 517–523.
17.
ManrichSFrattiniGRosaliniAC (2007) Identificação de Plásticos: uma ferramenta para reciclagem [Identification of Plastics: a Tool for Recycling]. São Carlos, Brazil: Ed.UFSCar 2a Ed.
18.
MatosTFLSchalchV (2007) Composição dos resíduos poliméricos, pós-consumo, gerados no município de São Carlos, SP [Composition of postconsumer polymer wastes generated in the municipality of São Carlos, SP]. Revista Polímeros: Ciência e Tecnologia17(4): 346–351.
19.
MenkeDFiedlerHZwahrH (2003) Don’t ban PVC: Incinerate and recycle it instead. Waste Management and Research21: 172–177.
20.
NunesKRAMahlerCFValleRNevesC (2007) Evaluation of investments in recycling centres for construction and demolition wastes in Brazilian municipalities. Waste Management27: 1531–1540.
21.
PintoTP (1999) Metodologia para a gestão diferenciada de resíduos sólidos da construção urbana [Methodology for the differentiated management of urban construction wastes]. PhD Thesis, Escola Politécnica da Universidade de São Paulo. São Paulo, Brazil.
22.
ReichLStivalaSS (1971) Elements of Polymer Degradation. New York, USA: McGraw Hill.
23.
RodolfoAJrMeiLHI (2007) Mecanismos de degradação e estabilização térmica do PVC [Mechanisms of decomposition and thermal stabilization of PVC]. Polímeros: Ciência e Tecnologia17(3): 263–275.
24.
RodolfoAJrNunesLROrmanjiW (2006) Tecnologia do PVC [PVC Technology]. São Paulo, Brazil: ProEditores/Braskem2a. ed.
25.
SouzaUELAgopyanVPaliariJC (1995) Perdas de materiais nos canteiros de obras: a quebra do mito [Loss of materials at construction sites: breaking the myth]. Qualidade na Construção13: 10–15.
26.
SpoerriALangDJBinderCRScholzRW (2009) Expert-based scenarios for strategic waste and resource management planning - C&D waste recycling in the Canton of Zurich, Switzerland. Resources, Conservation and Recycling53: 592–600.
WangJYuanHKangXLuW (2010) Critical success factors for on-site sorting of construction waste: A China study. Resources, Conservation and Recycling54: 931–936.
