Leaching from municipal solid waste incineration bottom ash treated in a rotary kiln was quantified using a combination of lab-scale leaching experiments and geochemical modelling. Thermal treatment in the rotary kiln had no significant effect on the leaching of Al, Ba, Ca, Mg, Si, Sr, Zn, sulfate and inorganic carbon. Leaching of these elements from the treated residues remained unchanged and was, in general, controlled by solubility of the same minerals as in the untreated residues. Leaching of Cd, Co, Ni, Ti, Be, Bi, and Sn from both untreated and treated residues was found to be close to or below their detection limits; no effects of the thermal treatment on leachability of these metals were observed. The leaching of Cl, dissolved organic carbon (DOC), Cu and Pb decreased by at least one order of magnitude after the thermal treatment. This could be explained by evaporation (Cl) and by a better burnout of organic matter which then limited metal–DOC complexation and mobility. At the same time, leaching of Mo and Cr appeared to increase by a factor of 4 and more than two orders of magnitude, respectively. The large changes in Cr leaching may be explained by decreases in Al reduction capacity after the thermal treatment. Overall, rotary kiln thermal treatment of bottom ashes can be recommended to reduce the leaching of Cu, Pb, Cl and DOC; however, increased leaching of Cr and Mo should be expected.
AbergAKumpieneJEckeH (2006) Evaluation and prediction of emissions from a road built with bottom ash from municipal solid waste incineration (MSWI). Science of the Total Environment355: 1–12.
2.
ArickxSVan GervenTVandecasteeleC (2006) Accelerated carbonation for treatment of MSWI bottom ash. Journal of Hazardous Materials137: 235–243.
3.
ArickxSVan GervenTKnaepkensTHindrixKEvensRVandecasteeleC (2007) Influence of treatment techniques on Cu leaching and different organic fractions in MSWI bottom ash leachate. Waste Management27: 1422–1427.
4.
AstrupT (2007) Pretreatment and utilization of waste incineration bottom ashes: Danish experiences. Waste Management27: 1452–1457.
AstrupTDijkstraJJComansRNJvan der SlootHAand ChristensenTH (2006) Geochemical modeling of leaching from MSWI air-pollution-control residues. Environmental Science & Technology40: 3551–3557.
7.
BenedettiMFMilneCJKinniburghDGVanriemsdijkWHKoopalLK (1995) Metal-ion binding to humic substances - application of the nonideal competitive adsorption model. Environmental Science & Technology29: 446–457.
8.
BergfeldtBSchmidtVSelingerASeifertHVehlowJ (1997) Investigation of sintering processes in bottom ash to promote the reuse in civil construction – Part 2: Long term behavior. In: GoumansJJJMSendenGJvan der SlootHA (eds.) Waste Materials in Construction: Putting Theory in Practice. Amsterdam: Elsevier Science, 51–58.
9.
BethanisSCheesemanCRSollarsCJ (2004) Effect of sintering temperature on properties and leaching of incinerator bottom ash. Waste Management & Research22: 255–264.
10.
BodénanFGuyonnetDPiantonePBlancPh (2010) Mineralogy and pore water chemistry of a boiler ash from a MSW fluidized-bed incinerator. Waste Management30: 1280–1289.
11.
Bruder-HubscherVLagardeFLeroyMJFCoughanowrCEnguehardF (2001) Utilization of bottom ash in road construction: evaluation of the environmental impact. Waste Management & Research19: 545–556.
12.
CEN (ed.) (1999) EN/TS 12457-2: Compliance Test for Leaching of Granular Waste Materials and Sludges – Part 2: One Stage Batch Test at a Liquid to Solid Ratio of 10 l/kg with Particle Size below 4 mm (without or with size reduction). Brussels: European Committee for Standardization, 1999.
13.
CEN (ed.) (2006) EN/TS 14497: Leaching Behaviour Tests – Influence of pH on Leaching with Continuous pH-Control. Brussels: European Committee for Standardization, 2006.
CornelisGVan GervenTVandecasteeleC (2006) Antimony leaching from uncarbonated and carbonated MSWI bottom ash. Journal of Hazardous Materials137: 1284–1292.
17.
DaboDBadreddineRDe WindtLDrouadaineI (2009) Ten-year chemical evolution of leachate and municipal solid waste incineration bottom ash used in a test road site. Journal of Hazardous Materials172: 904–913.
18.
Danish Standard (1982) DS 259: Determination of Metals in Water, Sludge and Sediments – General Guidelines for Determination by Atomic Absorption Spectrometry in Flame (in Danish). Charlottenlund: Danish Standards Association, 1982.
19.
DEPA (ed.) (2008) Affaldsstatistik 2006. Orientering fra Miljøstyrelsen Nr.2 (in Danish). Copenhagen: Miljøstyrelsen, 2008.
20.
DijkstraJJVan ZomerenAMeeussenJCLComansRNJ (2006a) Effect of accelerated aging of MSWI bottom ash on the leaching mechanisms of copper and molybdenum. Environmental Science & Technology40: 4481–4487.
21.
DijkstraJJvan der SlootHAComansRNJ (2006b) The leaching of major and trace elements from MSWI bottom ash as a function of pH and time. Applied Geochemistry21: 335–351.
22.
DijkstraJJMeeussenJCLvan der SlootHAComansRNJ (2008) A consistent geochemical modelling approach for the leaching and reactive transport of major and trace elements in MSWI bottom ash. Applied Geochemistry23: 1544–1562.
23.
European Commission (2003) Council Decision of 19 December 2002 establishing criteria and procedures for acceptance of waste at landfills pursuant to Article 16 and Annex II to Directive 1999/31/EC. Brussels: European Commission, 2003.
24.
FrancoisDPiersonK (2009) Environmental assessment of a road site built with MSWI residue. Science of the Total Environment407: 5949–5960.
25.
FruergaardTHyksJAstrupT (2010) Life-cycle assessment of selected management options for air pollution control residues from waste incineration. Science of the Total Environment408: 4672–4680.
26.
GougarMLDScheetzBERoyDM (1996) Ettringite and C–S–H Portland cement phases for waste ion immobilization: A review. Waste Management16: 295–303.
27.
GuyonnetDBodenanFBrons-LaotGBurnolAChateauLCrestM (2008) Multiple-scale dynamic leaching of a municipal solid waste incineration ash. Waste Management28: 1963–1976.
28.
HjelmarOHolmJCrillesenK (2007) Utilisation of MSWI bottom ash as sub-base in road construction: First results from a large-scale test site. Journal of Hazardous Materials139: 471–480.
29.
HuYHyksJAstrupTChristensenTH (2008) Effect of drying on leaching testing of treated municipal solid waste incineration APC-residues. Waste Management & Research26: 400–405.
30.
HyksJAstrupT (2009) Influence of operational conditions, waste input and ageing on contaminant leaching from waste incinerator bottom ash: A full-scale study. Chemosphere76: 1178–1184.
31.
HyksJAstrupTChristensenTH (2007) Influence of test conditions on solubility controlled leaching predictions from air-pollution-control residues. Waste Management & Research25: 457–466.
32.
HyksJAstrupTChristensenTH (2009a) Leaching from MSWI bottom ash: Evaluation of non-equilibrium in column percolation experiments. Waste Management29: 522–529.
33.
HyksJAstrupTChristensenTH (2009b) Long-term leaching from MSWI air-pollution-control residues: Leaching characterization and modeling. Journal of Hazardous Materials162: 80–91.
34.
MeeussenJCL (2003) ORCHESTRA: An object-oriented framework for implementing chemical equilibrium models. Environmental Science & Technology37: 1175–1182.
35.
MeimaJAComansRNJ (1997) Geochemical modeling of weathering reactions in municipal solid waste incinerator bottom ash. Environmental Science & Technology31: 1269–1276.
36.
MeimaJAComansRNJ (1998a) Application of surface complexation precipitation modeling to contaminant leaching from weathered municipal solid waste incinerator bottom ash. Environmental Science & Technology32: 688–693.
37.
MeimaJAComansRNJ (1998b) Reducing Sb-leaching from municipal solid waste incinerator bottom ash by addition of sorbent minerals. Journal of Geochemical Exploration62: 299–304.
38.
MeimaJAVan ZomerenAComansRNJ (1999) Complexation of Cu with dissolved organic carbon in municipal solid waste incinerator bottom ash leachates. Environmental Science & Technology33: 1424–1429.
39.
MilneCJKinniburghDGVan RiemsdijkWHTippingE (2003) Generic NICA-Donnan model parameters for metal-ion binding by humic substances. Environmental Science & Technology37: 958–971.
40.
SabbasTPolettiniAPomiRAstrupTHjelmarOMostbauerP (2003) Management of municipal solid waste incineration residues. Waste Management23: 61–88.
41.
SchneiderJVehlowJVoggH (1994) Improving the MSWI bottom ash quality by simple in-plant measures. In: GoumansJJJMvan der SlootHAAalbersThG (eds.) Environmental Aspects of Construction with Waste Materials. Amsterdam: Elsevier Science, 605–620.
42.
SelingerASchmidtVBergfeldtBVehlowJSimonFG (1997) Investigation of sintering processes in bottom ash to promote the reuse in civil construction - Part 1: Element balance and leaching. In: GoumansJJJMSendenGJvan der SlootHA (eds.) Waste Materials in Construction: Putting Theory in Practice. Amsterdam: Elsevier Science, 41–49.
43.
SorensenMAKochCBStackpooleMMBordiaRKBenjaminMMChristensenTH (2000) Effects of thermal treatment on mineralogy and heavy metal behavior in iron oxide stabilized air pollution control residues. Environmental Science & Technology34: 4620–4627.
44.
Van GervenTVan KeerEArickxSJaspersMWautersGVandecasteeleC (2005) Carbonation of MSWI-bottom ash to decrease heavy metal leaching, in view of recycling. Waste Management25: 291–300.
45.
Van ZomerenAComansRNJ (2004) Contribution of natural organic matter to copper leaching from municipal solid waste incinerator bottom ash. Environmental Science & Technology38: 3927–3932.
46.
Van ZomerenAComansRNJ (2009) Carbon speciation in municipal solid waste incinerator (MSWI) bottom ash in relation to facilitated metal leaching. Waste Management29: 2059–2064.
