The present study dealt with the whole valorization process of exhaust refinery catalysts, including metal extraction by ferric iron leaching and metal recovery by precipitation with sodium hydroxide. In the leaching operation the effects on metal recovery of the concentration and kind of acid, the concentration of catalyst and iron (III) were determined. The best operating conditions were 0.05 mol L−1 sulfuric acid, 40 g L−1 iron (III), 10% catalyst concentration; almost complete extraction of nickel and vanadium, and 50%extraction efficiency of aluminium and less than 20% for molybdenum. Sequential precipitation on the leach liquor showed that it was not possible to separate metals through such an approach and a recovery operation by means of a single-stage precipitation at pH 6.5 would simplify the procedures and give a product with an average content of iron (68%), aluminium (13%), vanadium (11%), nickel (6%) and molybdenum (1%) which would be potentially of interest in the iron alloy market. The environmental sustainability of the process was also assessed by means of life cycle assessment and yielded an estimate that the highest impact was in the category of global warming potential with 0.42 kg carbon dioxide per kg recovered metal.
Al-MansiNMAbdel MonemNM (2002) Recovery of nickel oxide from spent catalyst. Waste Management22: 85–90.
2.
AmiriFMousaviSMYaghmaeiS (2011) Enhancement of bioleaching of a spent Ni/Mo hydroprocessing catalyst by Penicillium simplicissimum. Separation and Purification Technology80: 566–576.
3.
BeolchiniFVegliòF (1999) Kinetic modeling of pyrrothite ore leaching by ferric iron and related statistical analysis. Industrial & Engineering Chemistry Research38: 3296–3299.
4.
BeolchiniFFontiVFerellaF. (2010) Metal recovery from spent refinery catalysts by means of biotechnological strategies. Journal of Hazardous Materials178: 529–534.
5.
BeolchiniFFontiVDell’AnnoA. (2012) Assessment of biotechnological strategies for the valorization of metal bearing wastes. Waste Management32: 949–956.
6.
BoudaMHammyFMercierG. (2009) Chemical leaching of metals from wastewater sludge: comparative study by use of three oxidizing agents [H2O2, FeCl3, and Fe2(SO4)3]. Water Environment Research81: 523–531.
7.
ChaudharyAJDonaldsonJDBoddingtonSC. (1993) Heavy metals in environment. Part II. a hydrochloric acid leaching process for the recovery of nickel value from a spent catalyst. Hydrometallurgy34: 137–150.
8.
CórdobaEMMuñozJABlázquezML. (2008) Leaching of chalcopyrite with ferric ion. Part I: General aspects. Hydrometallurgy93: 81–87.
DutrizacJE (1994) The leaching of silver sulphide in ferric ion media. Hydrometallurgy35: 275–292.
11.
EPA (US Environmental Protection Agency) (2001) Method 200.7. Determination of Metals and Trace Elements in Water and Wastes by Inductively Coupled Plasma-Atomic Emission Spectrometry. Cincinnati, OH: Environmental Monitoring Systems Laboratory, Office of Research and Development.
12.
EPA (US Environmental Protection Agency) (2007a) Method 3051A. Microwave assisted acid digestion of sediments, sludges, soils, and oils. In: Test Methods for Evaluating Solid Waste, Physical/Chemical Methods. Washington, DC: Office of Solid Waste.
13.
EPA (US Environmental Protection Agency) (2007b) Method 6010C. Inductively coupled plasma-atomic emission spectrometry. In: Test Methods for Evaluating Solid Waste, Physical/Chemical Methods. Washington, DC: Office of Solid Waste.
14.
FerellaFOgnyanovaADe MichelisI. (2011). Extraction of metals from spent hydrotreating catalysts: Physico-mechanical pre-treatments and leaching stage. Journal of Hazardous Materials192: 176–185
15.
FomchenkoNVBiryukovVV (2009) A two-stage technology for bacterial and chemical leaching of copper–zinc raw materials by Fe3+ ions with their subsequent regeneration by chemolithotrophic bacteria. Applied Biochemistry and Microbiology45: 56–60.
16.
GholamiRMBorgheiSMMousaviSM (2011) Bacterial leaching of a spent Mo–Co–Ni refinery catalyst using Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans. Hydrometallurgy106: 26–31.
17.
GuinéeJBGorréeMHeijungsR. (2001a) Life cycle assessment; An operational guide to the ISO standards; Parts 1 and 2. Ministry of Housing, Spatial Planning and Environment (VROM) and Centre of Environmental Science (CML), Den Haag and Leiden, the Netherlands.
18.
GuinéeJBGorréeMHeijungsR. (2001b) Life cycle assessment; An operational guide to the ISO standards; Part 3: Scientific Background. Ministry of Housing, Spatial Planning and Environment (VROM) and Centre of Environmental Science (CML), Den Haag and Leiden, the Netherlands.
19.
HatfieldTLPierceDT (1998) Electrochemical remediation of metal-bearing wastewaters. Part II: Corrosion-based inhibition of copper removal by iron (III). Journal of Applied Electrochemistry28: 397–403.
20.
IdrisJMusaMYinCY. (2010) Recovery of nickel from spent catalyst from palm oil dehydrogenation process using acidic solutions. Journal of Industrial and Engineering Chemistry16: 251–255.
21.
LiQLiDQianF (2009) Pre-oxidation of high-sulfur and high-arsenic refractory gold concentrate by ozone and ferric ions in acidic media. Hydrometallurgy97: 61–66.
22.
MarafiMStanislausA (2008) Spent hydroprocessing catalyst management: a review: Part II. Advances in metal recovery and safe disposal methods. Resources, Conservation and Recycling53: 1–26.
23.
MarafiMStanislausA (2011) Alumina from reprocessing of spent hydroprocessing catalyst. Catalysis Today178: 117–123.
24.
MarafiMStanislausAAbsi-HalabiM (1994) Heavy oil hydrotreating catalyst rejuvenation by leaching of foulant metals with ferric nitrate-organic acid mixed reagents. Applied Catalysis B: Environmental4: 19–27.
25.
MishraDKimDJRalphDE. (2007) Bioleaching of vanadium rich spent refinery catalysts using sulfur oxidizing lithotrophs. Hydrometallurgy88: 202–209.
26.
MishraDAhnJGKimDJ. (2009) Dissolution kinetics of spent petroleum catalyst using sulfur oxidizing acidophilic microorganisms. Journal of Hazardous Materials167: 1231–1236.
27.
MishraDChaudhuryGRKimDJ. (2010) Recovery of metal values from spent petroleum catalyst using leaching-solvent extraction technique. Hydrometallurgy101: 35–40.
28.
ParkKHReddyBRMohapatraD. (2006) Hydrometallurgical processing and recovery of molybdenum trioxide from spent catalyst. International Journal of Mineral Processing80: 261–265.
29.
PorthaJ-FJaubertJ-NLouretS. (2010) Life cycle assessment applied to naphtha catalytic reforming. Oil & Gas Science and Technology65: 793–805.
30.
PradhanDMishraDKimDJ. (2010) Bioleaching kinetics and multivariate analysis of spent petroleum catalyst dissolution using two acidophiles. Journal of Hazardous Materials175: 267–273.
31.
PuigdomenechI (2009) Program MEDUSA (Make Equilibrium Diagrams Using Sophisticated Algorithms). Stockholm, Sweden: Department of Inorganic Chemistry, The Royal Institute of Technology.
32.
SanthiyaDTingY-P (2006) Use of adapted Aspergillus niger in the bioleaching of spent refinery processing catalyst. Journal of Biotechnology121: 62–74.
33.
Szymczycha-MadejaA (2011) Kinetics of Mo, Ni, V and Al leaching from a spent hydrodesulphurisation catalyst in a solution containing oxalic acid and hydrogen peroxide. Journal of Hazardous Materials186: 2157–2161.
34.
TayJ-HShowK-YHongS-Y. (2003) Thermal stabilization of iron-rich sludge for high strength aggregates. Journal of Materials in Civil Engineering15: 577–585.
35.
TrimmDL (2001) The regeneration or disposal of deactivated heterogeneous catalysts. Applied Catalysis A: General212: 153–160.
ValverdeIMPaulinoJFAfonsoJC (2008) Hydrometallurgical route to recover molybdenum, nickel, cobalt and aluminum from spent hydrotreating catalysts in sulphuric acid medium. Journal of Hazardous Materials160: 310–317.
38.
YangQZQiGJLowHC. (2011) Sustainable recovery of nickel from spent hydrogenation catalyst: economics, emissions and wastes assessment. Journal of Cleaner Production19: 365–375.
39.
ZengLChengCY (2009) A literature review of the recovery of molybdenum and vanadium from spent hydrodesulphurisation catalysts. Part I: Metallurgical processes. Hydrometallurgy98: 1–9.
