The expressive generation of construction and demolition waste is stimulating several studies for reusing this material. The improvement of soft soils by concrete compaction piles has been widely applied for 40 years in some Brazilian cities. This technique is used to improve the bearing capacity of soft soils, allowing executing shallow foundations instead of deep foundations. The compaction piles use a high volume of material. This article explored the possibility of using recycled aggregates from construction waste to replace the natural aggregates in order to improve the bearing capacity of the soft soil, regarding its compressive strength. Construction wastes from different stages of a construction were used in order to make samples of concrete with recycled aggregates. The strength of concretes with natural aggregates was compared with the strength of concretes with recycled (fine and coarse) aggregates. Results show that all samples met the minimum compressive strength specified for compaction piles used to improve the bearing capacity of soft soils. The concrete with recycled aggregate from the structural stage had even higher resistances than the concrete with natural aggregates. This behaviour was attributed to the large amount of cementitious materials in the composition of this type of concrete. It was also observed that concrete with recycled fine aggregate has a superior resistance to concrete with recycled coarse aggregate.
AhmedAUgaiKKameiT (2011) Laboratory and field evaluations of recycled gypsum as a stabilizer agent in embankment construction. Soil and Foundations51: 975–990.
2.
Aït-MokhtarABelarbiRBenboudjemaF. (2013) Experimental investigation of the variability of concrete durability properties. Cement and Concrete Research45: 21–36.
3.
AkbarnezhadAOngKZhangM. (2011) Microwave-assisted beneficiation of recycled concrete aggregates. Construction and Building Materials25: 3469–3479.
4.
AlvesAVVieiraTFde BritoJ. (2014) Mechanical properties of structural concrete with fine recycled ceramic aggregates. Construction and Building Materials64: 103–113.
5.
AmorimMDGusmãoADGusmão FilhoJA. (2013) Plate load tests on improved ground with construction and demolition wastes compaction piles. In: CuiY-J. (eds) Proceedings of the 5th International Young Geotechnical Engineering Conference, Marne-la-Vallée, France, 31 August–1 September 2013, pp.69–72. Amsterdam: IOS Press.
6.
ArulrajahADisfaniMMHorpibulsukS. (2014) Physical properties and shear strength responses of recycled construction and demolition materials in unbound pavement base/subbase applications. Construction and Building Materials58: 245–257.
7.
De VriesWRemPCBerkhoutP (2009) ADR: A new method for dry classification. In: Proceedings of the ISWA International Conference, Lisbon, Portugal, 12 October–15 October 2009, pp.103–113. Available at: www.iswa.org (accessed 16 August 2016).
8.
DilbasHŞimşekMÇakirÖ. (2014) An investigation on mechanical and physical properties of recycled aggregates concrete (RAC) with and without silica fume. Construction and Building Materials61: 50–59.
EtxeberriaMVázquezEMaríA. (2007) Influence of amount of recycled coarse aggregates and production process on properties of recycled aggregate concrete. Cement and Concrete Research37: 735–742.
11.
FariasABFucaleSPGusmãoAD (2012) Use of CCW (Civil Construction Waste) in soil improvement. Journal of Civil Engineering and Architecture6: 913–918.
12.
FolinoPXargayH (2014) Recycled aggregate concrete – Mechanical behavior under uniaxial and triaxial compression. Construction and Building Materials56: 21–31.
13.
García-GonzálezJRodríguez-RoblesDJuan-ValdésA. (2014) Ceramic ware waste as coarse aggregate for structural concrete production. Environmental Technology36: 3050–3059.
14.
GarridoECalvoFRamosAF. (2005) Methodology of environmental diagnosis for construction and demolition waste landfills: A tool for planning and making decisions. Environmental Technology26: 1231–1242.
15.
GayarreFLPérezCL-CLópezMAS. (2014) The effect of curing conditions on the compressive strength of recycled aggregate concrete. Construction and Building Materials53: 260–266.
16.
GusmãoAD (2007) Melhoramento de solos arenosos [Improvement of sandy soils]. In: Geotecnia no Nordeste [Geotechnics in the Northeast] (in Portuguese), 2rd edn.Editora Universitaria, Federal University of Pernambuco (UFPE), pp.331–362.
17.
IsmailSRamliM (2013) Engineering properties of treated recycled concrete aggregate (RCA) for structural applications. Construction and Building Materials44: 464–476.
18.
KimSLeeDLeeJ. (2012) Application of recycled aggregates porous concrete pile (RAPP) to improve soft ground. Journal of Material Cycles and Waste Management14: 360–370.
19.
KumarASadanaD (2012) Bearing capacity of soil reinforced with vertical columns of recycled concrete aggregates. Australian Journal of Civil Engineering10: 153–162.
20.
LiuZZhangYLiuL. (2013) An analytical model for determining the relative electrical resistivity of cement paste and C–S–H gel. Construction and Building Materials48: 647–655.
21.
LotfiSDejaJRemP. (2014) Mechanical recycling of EOL concrete into high-grade aggregates. Resources, Conservation and Recycling87: 117–125.
22.
LotfiSEggimannMWagnerE. (2015) Performance of recycled aggregate concrete based on a new concrete recycling technology. Construction and Building Materials95: 243–256.
23.
MáliaMde BritoJDuarte PinheiroM. (2013) Construction and demolition waste indicators. Waste Management & Research31: 241–255.
24.
Medeiros-JuniorRALimaMG (2016) Electrical resistivity of unsaturated concrete using different types of cement. Construction and Building Materials107: 11–16.
25.
Medeiros JuniorRAFucaleSPGusmãoAD. (2010) Research characterized the physical properties of recycled aggregate of civil construction wastes. Journal of Civil Engineering and Architecture4: 67–71.
26.
Medeiros-JuniorRALimaMGMedeirosMHF. (2014) Investigação da resistência à compressão e da resistividade elétrica de concretos com diferentes tipos de cimento [Investigation of the compressive strength and electrical resistivity of concrete with different cement types] (in Portuguese). Revista Alconpat4: 116–132.
27.
Medeiros-JuniorRALimaMGBritoPC. (2015) Chloride penetration into concrete in an offshore platform-analysis of exposure conditions. Ocean Engineering103: 78–87.
28.
MedinaCZhuWHowindT. (2015) Effect of the constituents (asphalt, clay materials, floating particles and fines) of construction and demolition waste on the properties of recycled concretes. Construction and Building Materials79: 22–33.
29.
MehtaPKMonteiroPJ (2005) Concrete: Microstructure, properties and materials. 3rd ed.California: Berkeley.
30.
NBR 5738 (2015) Concreto - procedimento para moldagem e cura de corpos de prova [Concrete - procedure for molding and curing test specimens] (in Portuguese). Brazilian Association of Technical Standards (ABNT), Rio de Janeiro, 1–9.
31.
NBR 5739 (2007) Concreto - ensaios de compressão de corpos-de-prova cilíndricos [Concrete - compression test of cylindrical specimens - test method] (in Portuguese). Brazilian Association of Technical Standards (ABNT), Rio de Janeiro, 1–9.
32.
NBR 11578 (1997) Cimento Portland composto - Especificação [Portland composite cement – Specification] (in Portuguese). Brazilian Association of Technical Standards (ABNT), Rio de Janeiro, 1–5.
33.
OtsukiNMiyazatoSYodsudjaiW (2003) Influence of recycled aggregate on interfacial transition zone, strength, chloride penetration and carbonation of concrete. Journal of Materials in Civil Engineering15: 443–451.
34.
PepeMFilhoRDTKoendersEAB. (2014) Alternative processing procedures of recycled aggregates in structural concrete. Construction and Building Materials69: 124–132.
35.
PoonCSShuiZHLamL (2004) Effect of microstructure of ITZ on compressive strength of concrete prepared with recycled aggregates. Construction and Building Materials18: 461–468.
36.
RahmanMdAImteazMArulrajahA. (2014) Suitability of recycled construction and demolition aggregates as alternative pipe backfilling materials. Journal of Cleaner Production66: 75–84.
37.
Rodríguez-RoblesDGarcía-GonzálezJJuan-ValdésA. (2015). Overview regarding construction and demolition waste in Spain. Environmental Technology36: 3060–3070.
38.
TamVWTamCLeKN (2007) Removal of cement mortar remains from recycled aggregate using pre-soaking approaches. Resources, Conservation and Recycling50: 82–101.
39.
VázquezEBarraMAponteD. (2014) Improvement of the durability of concrete with recycled aggregates in chloride exposed environment. Construction and Building Materials67: 61–67.
40.
WangCWuJ-ZZhangF-S (2013) Development of porous ceramsite from construction and demolition waste. Environmental Technology34: 2241–2249.
