With the burning issue of air, land and water pollution, the premonition of looking forward towards a future devoid of any kind of oil and gas reserves has caused a paradigm shift towards recycling, recovery of any synthetic polymer and also to dispose them off environmentally. Among them are plastics such as polyethylene terephthalate and poly vinyl chloride. Polyurethane (PU) is also under the scanner to dispose of or recycle it environmentally and sustainably. PU is at present the sixth most utilized polymer all over the world with a production of nearly 18 million tonnes per annum, which roughly estimates a daily production of PU products of greater than a million of cubic metres. Its thermostable nature is one of the major reasons for its higher preference over other polymers. This review article discusses the current disposal and technologies available to recycle waste PU foams and also sheds some light on some additional work being done in the field to upgrade the existing technology. Interestingly, some methods mentioned here are probably undergoing scale-up trials runs by now. Currently, the most researched and studied ones are mechanical recycling and glycolysis. But microbial and enzymatic disposal methods can be turned into full-scale industrial recycling processes in the near future. Additionally, we can see an archetypal shift from traditional oil-based sources to the agrarian sources.
AkutsuYNakajima-KambeTNomuraN, et al. (1998) Purification and properties of a polyester polyurethane-degrading enzyme fromComamonas acidovorans TB-35. Applied and Environmental Microbiology64: 62–67.
2.
Álvarez-BarragánJDomínguez-MalfavónLVargas-SuárezM, et al. (2016) Biodegradative activities of selected environmental fungi on a polyester polyurethane varnish and polyether polyurethane foams. Applied and Environmental Microbiology82: 5225–5235.
3.
ArroyoRHorgniesMJuncoC, et al. (2019) Lightweight structural eco-mortars made with polyurethane wastes and non-Ionic surfactants. Construction and Building Materials197: 157–163.
4.
BehrendtGNaberB (2009) The chemical recycling of polyurethanes. Journal of the University of Chemical Technology and Metallurgy44: 3–23.
5.
BernardiniJCinelliPAnguillesiI, et al. (2015) Flexible polyurethane foams green production employing lignin or oxypropylated lignin. European Polymer Journal64: 147–156.
6.
BhandariSGuptaP (2018) Chemical depolymerization of polyurethane foam via ammonolysis and aminolysis. In: ThomasSRaneAVKannyK, et al. (eds) Recycling of Polyurethane Foams. Norwich, NY: William Andrew Publishing, pp.77–87.
7.
BordaJPasztorGZsugaM (2000) Glycolysis of polyurethane foams and elastomers. Polymer Degradation Stability68: 419–422.
8.
BraslawJGerlockJL (1984) Polyurethane waste recycling. 2. Polyol recovery and purification. Industrial and Engineering Chemistry Process Design and Development23: 552–557.
ChuayjuljitSNorakankornCPimpanV (2002) Chemical recycling of rigid polyurethane foam scrap via base catalyzed aminolysis. Journal of Metals, Materials and Minerals12: 19–22.
11.
ConesaJAFontRAntonioM, et al. (1994) Pyrolysis of polyethylene in a fluidized bed reactor. Energy and Fuels8: 1238–1246.
12.
CosgroveLMcGeechanPLRobsonGD, et al. (2007) Fungal communities associated with degradation of polyester polyurethane in soil. Applied and Environmental Microbiology73: 5817–5824.
13.
CrabbeJRCampbellJRThompsonL, et al. (1994) Biodegradation of a colloidal ester-based polyurethane by soil fungi. International Biodeterioration and Biodegradation33: 103–113.
14.
DasBKonwarUMandalM, et al. (2013) Sunflower oil-based biodegradable hyperbranched polyurethane as a thin film material. Industrial Crops and Products44: 396–404.
15.
Do CantoVPThompsonCENetzPA (2019) Polyurethanases: Three-dimensional structures and molecular dynamics simulations of enzymes that degrade polyurethane. Journal of Molecular Graphics and Modelling89: 82–95.
16.
El-SayedAMMahmoudWMDavisEM, et al. (1996) Biodegradation of polyurethane coatings by hydrocarbon-degrading bacteria. International Biodeterioration & Biodegradation37: 69–79.
17.
European Parliament and Council (1999) Directive 1999/31/EC of the European Parliament and of the Council of 26 April 1999 on the landfill of waste. Official Journal of the European Communities L182, 42: 1–19.
18.
European Parliament and Council (2008) Directive 2008/98/EC of the European Parliament and of the Council of 19 November 2008 on waste and repealing certain directives. Official Journal of the European Union34: 99–126.
19.
EvtimovaRLozevaYSchmidtKH, et al. (2003) Polyester polyols from waste PET bottles for polyurethane rigid foams. Technische Hochschule Wildau (Technical University of Applied Sciences Wildau) 8: 19–25.
20.
FangJYeSHShankarramanV, et al. (2014) Biodegradable poly (ester urethane) urea elastomers with variable amino content for subsequent functionalization with phosphorylcholine. Acta Biomaterialia10: 4639–4649.
21.
FangZQiuCJiD, et al. (2019) Development of high-performance biodegradable rigid polyurethane foams using full modified soy-based polyols. Journal of Agricultural and Food Chemistry67: 2220–2226.
22.
FilipZ (1979) Polyurethane as the sole nutrient source for Aspergillus niger and Cladosporium herbarum. European Journal of Applied Microbiology and Biotechnology7: 277–280.
23.
FontRFullanaACaballeroJ, et al. (2001) Pyrolysis study of polyurethane. Journal of Analytical and Applied Pyrolysis58–59: 63–77.
24.
FormelaKHejnaAZedlerU, et al. (2017) Structural, thermal and physico-mechanical properties of polyurethane/brewers’ spent grain composite foams modified with ground tire rubber. Industrial Crops and Products108: 844–852.
25.
FukayaTWatandoHFujiedaS, et al. (2006) Reheating decomposition process as chemical recycling for rigid polyurethane foam. Polymer Degradation and Stability91: 2549–2553.
26.
GadhaveRVSrivastavaSMahanwarPA, et al. (2019) Recycling and disposal methods for polyurethane wastes: A review. Open Journal of Polymer Chemistry9: 39–51.
27.
GamaNFerreiraABarros-TimmonsA (2018) Polyurethane foams: Past, present, and future. Materials11: 1841.
28.
GautamRBassiAYanfulE, et al. (2007) Biodegradation of automotive waste polyester polyurethane foam using Pseudomonas chlororaphis ATCC55729. International Biodeterioration & Biodegradation60: 245–249.
29.
GerlockJBraslawJZinboM (1984b) Polyurethane waste recycling. 1. Glycolysis and hydroglycolysis of water-blown foams. Industrial and Engineering Chemistry Process Design and Development23: 545–552.
30.
GerlockJLBraslawJMahoneyLR, et al. (1980) Reaction of polyurethane foam with dry steam: Kinetics and mechanism of reactions. Journal of Polymer Science: Polymer Chemistry Edition18: 541–557.
31.
GhaderianAHaghighiAHTaromiFA, et al. (2015) Characterization of rigid polyurethane foam prepared from recycling of PET waste. Periodica Polytechnica Chemical Engineering59: 296–305.
32.
GodinhoBGamaNBarros-TimmonsA, et al. (2021) Recycling of different types of polyurethane foam wastes via acidolysis to produce polyurethane coatings. Sustainable Materials and Technologies29: e00330.
GrigatE (1978) Hydrolysis of plastics wastes. Kunststoffe68: 281–284.
35.
GuoXZhangWWangL, et al. (2016) Comparative study of nitrogen migration among the products from catalytic pyrolysis and gasification of waste rigid polyurethane foam. Journal of Analytical and Applied Pyrolysis120: 144–153.
36.
HeneczkowskiMGalinaH (2002) Material recycling of RIM flexible polyurethane foams wastes. Polimery47: 523–527.
37.
HowardGHilliardN (1999) Use of Coomassie blue-polyurethane interaction inscreening of polyurethanase proteins andpolyurethanolytic bacteria. International Biodeterioration & Biodegradation43: 23–30.
38.
HowardGTBlakeRC (1998) Growth of pseudomonas fluorescens on a polyester–polyurethane and the purification and characterization of a polyurethanase–protease enzyme. International Biodeterioration & Biodegradation42: 213–220.
39.
HowardGTNortonWNBurksT (2012) Growth of Acinetobacter gerneri P7 on polyurethane and the purification and characterization of a polyurethanase enzyme. Biodegradation23: 561–573.
40.
HowardGTRuizCHilliardNP (1999) Growth of Pseudomonas chlororaphis on a polyester–polyurethane and the purification and characterization of a polyurethanase–esterase enzyme. International Biodeterioration & Biodegradation43: 7–12.
41.
HuangGWangP (2017) Effects of preparation conditions on properties of rigid polyurethane foam composites based on liquefied bagasse and jute fibre. Polymer Testing60: 266–273.
42.
HulmeAGoodheadT (2003) Cost effective reprocessing of polyurethane by hot compression moulding. Journal of Materials Processing Technology139: 322–326.
43.
IbrahimINMaraqaAHameedK, et al. (2009) Polyester-polyurethane biodegradation by Alternaria solani, isolated from northern Jordan. Advances in Environmental Biology3: 162–170.
44.
ImEJKimSHLeeKH (2008) Optimization of pyrolysis conditions of polyurethane for recycling of solid products. Journal of Analytical and Applied Pyrolysis82: 184–190.
JasoVGlennGKlamczynskiA, et al. (2015) Biodegradability study of polylactic acid/ thermoplastic polyurethane blends. Polymer Testing47: 1–3.
50.
JensenJ (2000). Real-world economics of polyurethane foam recycling. In: Proceedings of the Polyurethane Foam Association Conference, p. 6. Arlington, VA.
51.
JinXDongJGuoX, et al. (2022) Current advances in polyurethane biodegradation. Polymer International71: 1384–1392.
52.
KanayaKTakahashiS (1994) Decomposition of polyurethane foams by alkanolamines. Journal of Applied Polymer Science51: 675–682.
53.
KayMMortonLPrinceE (1991) Bacterial degradation of polyester polyurethane. International Biodeterioration27: 205–222.
54.
KemonaAPiotrowskaM (2020) Polyurethane recycling and disposal: Methods and prospects-a review. Polymers12: 1752.
55.
KhanSNadirSShahZU, et al. (2017) Biodegradation of polyester polyurethane by Aspergillus tubingensis. Environmental Pollution225: 469–480.
56.
KurańskaMBarczewskiMUramK, et al. (2019) Basalt waste management in the production of highly effective porous polyurethane composites for thermal insulating applications. Polymer Testing76: 90–100.
57.
KurańskaMLeszczyńskaMMalewskaE, et al. (2020) Implementation of circular economy principles in the synthesis of polyurethane foams. Polymers12: 2068.
58.
KyliliASeduikyteLFokaidesPA (2018) Life cycle analysis of polyurethane foam wastes. In: ThomasSRaneAVKannyK, et al. (Eds) Recycling of polyurethane foams. Norwich, NY: William Andrew Publishing, pp.97–113.
59.
LiCLuoXLiT, et al. (2014) Polyurethane foams based on crude glycerol-derived biopolyols: One-pot preparation of biopolyols with branched fatty acid ester chains and its effects on foam formation and properties. Polymer55: 6529–6538.
60.
Loredo-TreviñoAGutiérrez-SánchezGRodríguez-HerreraR, et al. (2011) Microbial enzymes involved in polyurethane biodegradation: A review. Journal of Polymers and the Environment20: 258–265.
61.
MagninAHoornaertLPolletE, et al. (2018) Isolation and characterization of different promising fungi for biological waste management of polyurethanes. Microbial Biotechnology12: 544–555.
62.
MagninAPolletEPerrinR, et al. (2019) Enzymatic recycling of thermoplastic polyurethanes: Synergistic effect of an esterase and an amidase and recovery of building blocks. Waste Management85: 141–150.
63.
MansouriHRPizziA (2007) Recycled micronized polyurethane powders as active extenders of UF and PF wood panel adhesives. European Journal of Wood and Wood Products (Holz Als Roh- Und Werkstoff)65: 293–299.
64.
MathurGPrasadR (2012) Degradation of polyurethane by aspergillus flavus (ITCC 6051) Isolated from soil. Applied Biochemistry and Biotechnology167: 1595–1602.
65.
MatsumiyaYMurataNTanabeE, et al. (2010) Isolation and characterization of an ether-type polyurethane-degrading micro-organism and analysis of degradation mechanism by Alternaria sp. Journal of Applied Microbiology108: 1946–1953.
66.
MatuszakMLFrischKCReegenSL (1973) Hydrolysis of linear polyurethanes and model monocarbamates. Journal of Polymer Science: Polymer Chemistry11: 1683–1690.
MizeraKRyszkowskaJ (2016) Polyurethane elastomers from polyols based on soybean oil with a different molar ratio. Polymer Degradation and Stability132: 21–31.
69.
MotokuchoSNakayamaYMorikawaH, et al. (2017) Environment-friendly chemical recycling of aliphatic polyurethanes by hydrolysis in a CO2-water system. Journal of Applied Polymer Science135: 45897.
70.
MunzmayTMeckelWLimanU, et al. (2000) Process for the production of hydroxyfunctional compounds from (polyurethane) polyurea waste (US patent Number 6,020,386). US patent and Trademark Office.
71.
NaberBLeziusM and BASF Schwarzheide GmbH (1996) Preparation of recyclate polyols (U S patent 5556889). US Patent and Trademark Office.
72.
NairSKumarP (2007) Molecular characterization of a lipase-producing Bacillus pumilus strain (NMSN-1d) utilizing colloidal water-dispersible polyurethane. World Journal of Microbiology and Biotechnology23: 1441–1449.
73.
Nakajima-KambeTOnumaFAkutsuY, et al. (1997) Determination of polyester Polyurethane breakdown products and distribution of polyurethane degrading enzyme of Comamonas acidovorans strain TB-35Journal of Fermentation and Bioengineering83: 456–460.
74.
Nakajima-KambeTOnumaFKimparaN, et al. (1995) Isolation and characterization of a bacterium which utilizes polyester polyurethane as a sole carbon and nitrogen source. FEMS Microbiology Letters129: 39–42.
75.
Nakajima-KambeTShigeno-AkutsuYNomuraN, et al. (1999) Microbial degradation of polyurethane, polyester polyurethanes and polyether polyurethanes. Applied Microbiology and Biotechnology51: 134–140.
76.
NakkabiASadikiMFahimM, et al. (2015) Biodegradation of Poly (ester urethane)s by Bacillus subtilis. International Journal of Environmental Research9: 157–162.
77.
NgWSLeeCSChuahCH, et al. (2017) Preparation and modification of water-blown porous biodegradable polyurethane foams with palm oil-based polyester polyol. Industrial Crops and Products97: 65–78.
78.
NikjeMMAGarmarudiAB (2010) Regeneration of polyol by pentaerythritol assisted glycolysis of flexible polyurethane foam wastes. Iranian Polymer Journal19: 287–295.
79.
NikjeMMAGarmarudiABIdrisAB (2011) Polyurethane waste reduction and recycling: From bench to pilot scales. Designed Monomers and Polymers14: 395–421.
80.
NikjeMMAHaghshenasMGarmarudiAB (2007) “Split-phase” glycolysis of flexible PUF wastes and application of recovered phases in rigid and flexible foams productionPolymer-Plastics Technology and Engineering46: 265–271.
81.
NikjeMMANikrahMMohammadiFHA (2008) Microwave-assisted polyurethane bond cleavage via hydroglycolysis process at atmospheric pressure. Journal of Cellular Plastics44: 367–380.
82.
OpreaSPotolincaVOGradinariuP, et al. (2016) Synthesis, properties, and fungal degradation of castor-oil-based polyurethane composites with different cellulose contents. Cellulose23: 2515–2526.
83.
OsmanMSattiSMLuqmanA, et al. (2017) Degradation of polyester polyurethane by aspergillus sp. Strain S45 isolated from soil. Journal of Polymers and the Environment26: 301–310.
84.
Paciorek-SadowskaJBorowiczMIsbrandtM, et al. (2019) The use of waste from the production of rapeseed oil for obtaining of new polyurethane composites. Polymers11: 1431.
85.
PadhanRK (2018) Chemical depolymerization of polyurethane foams via combined chemolysis methods. In: ThomasSRaneAVKannyK, et al. (Eds) Recycling of Polyurethane Foams. Norwich, NY: William Andrew Publishing, pp. 89–96.
86.
PathiranaRASealKJ (1984) Studies on polyurethane deteriorating fungi. Part 1. Isolation and characterization of the test fungi employed. International Biodeterioration20: 163–168.
87.
PathiranaRASealKJ (1985) Studies on polyurethane deteriorating fungi. Part 4. A note on the spectro-chemical changes during fungal deterioration. International Biodeterioration21: 123–125.
RoweLHowardGT (2002) Growth of Bacillus subtilis on polyurethane and the purification and characterization of a polyurethanase-lipase enzyme. International Biodeterioration & Biodegradation50: 33–40.
90.
RussellJRHuangJAnandP, et al. (2011) Biodegradation of polyester polyurethane by endophytic fungi. Applied and Environmental Microbiology77: 6076–6084.
91.
ScheirsJ (1998a) Chapter 10 Recycling of polyurethanes. In: ScheirsJ (ed) Polymer Recycling: Science, Technology and Applications, 1st edn. Chichester, UK: Wiley, pp. 339–378.
92.
ScheirsJ (1998b) Chapter 13 Feedstock Recycling Pyrolysis, Hydrogenation and Gasification. In Polymer Recycling: Science, Technology and Applications (1st ed., pp. 459–506). Wiley.
93.
SchmidtJWeiROeserT, et al. (2017) Degradation of polyester polyurethane by bacterial polyester hydrolases. Polymers9: 65.
94.
SendijarevicV (2007) Chemical recycling of mixed polyurethane foam stream recovered from shredder residue into polyurethane polyols. Journal of Cellular Plastics43: 31–46.
95.
SendijarevicV, Troy Polymers Inc. and Polyventure Inc. (2004) Process for Chemical Recycling of Polyurethane containing Scrap (US patent 6,750,260). U.S. Patent and Trademark Office.
96.
SerranoLRincónEGarcíaA, et al. (2020) Bio-Degradable polyurethane foams produced by liquefied polyol from wheat straw biomass. Polymers12: 2646.
97.
ShaikAHBanerjeeSRahamanA, et al. (2021) One-step synthesis and characteristics of LiOH-castor oil based stable polyurethane foam. Journal of Polymer Research28: 220.
98.
ShaikAHJainRManchikantiS, et al. (2020) Reinstating structural stability of castor oil based flexible polyurethane foam using glycerol. ChemistrySelect5: 3959–3964.
99.
ShahAAHasanFAkhterJI, et al. (2008a) Degradation of polyurethane by novel bacterial consortium isolated from soil. Annals of Microbiology58: 381–386.
100.
ShahAAHasanFHameedA, et al. (2008b) Biological degradation of plastics: A comprehensive review. Biotechnology Advances26: 246–265.
101.
ShahZGulzarMHasanF, et al. (2016) Degradation of polyester polyurethane by an indigenously developed consortium of Pseudomonas and Bacillus species isolated from soil. Polymer Degradation and Stability134: 349–356.
102.
ShahZHasanFKrumholzL, et al. (2013) Degradation of polyester polyurethane by newly isolated Pseudomonas aeruginosa strain MZA-85 and analysis of degradation products by GC–MS. International Biodeterioration and Biodegradation77: 114–122.
103.
SharmaCEdatholathSSUnniAR, et al. (2016) A pre-polyaddition mediation of castor oil for polyurethane formation. Journal of Applied Polymer Science133: 43964.
104.
SharmaCKumarSUnniAR, et al. (2014) Foam stability and polymer phase morphology of flexible polyurethane foams synthesized from castor oil. Journal of Applied Polymer Science131: 40668.
105.
SimónDBorregueroAde LucasA, et al. (2015) Valorization of crude glycerol as a novel transesterification agent in the glycolysis of polyurethane foam waste. Polymer Degradation and Stability121: 126–136.
106.
SimónDBorregueroAde LucasA, et al. (2018) Recycling of polyurethanes from laboratory to industry, a journey towards the sustainability. Waste Management76: 147–171.
107.
SimónDBorregueroAMde LucasA, et al. (2014) Sustainable polyurethanes: Chemical recycling to get it. In: JiménezECabañasBLefebvreG (eds) Environment, Energy and Climate Change I. The Handbook of Environmental Chemistry, vol 32. Cham: Springer.
108.
SpontónMCasisNMazoP, et al. (2013) Biodegradation study by Pseudomonas sp. of flexible polyurethane foams derived from castor oil. International Biodeterioration & Biodegradation85: 85–94.
SzycherM (2012) Reaction injection molding. In: SzycherM (ed) Szycher’s Handbook of Polyurethanes, 2nd edn.Boca Raton, USA: CRC Press, pp. 373–392.
111.
TakamotoDYPetrichMA (1994) Effect of heterogeneous secondary pyrolysis reactions on the thermal decomposition of polyurethane scrap. Industrial and Engineering Chemistry Research33: 3004–3009.
112.
TakamotoTShirasakaHUyamaH, et al. (2001) Lipase-Catalyzed hydrolytic degradation of polyurethane in organic solvent. Chemistry Letters30: 492–493.
113.
TroevKAtanasovVTseviR, et al. (2000a) Chemical degradation of polyurethanes. Degradation of microporous polyurethane elastomer by dimethyl phosphonate. Polymer Degradation and Stability67: 159–165.
114.
TroevKAtanassovVTzeviR (2000b) Chemical degradation of polyurethanes. II. Degradation of microporous polyurethane elastomer by phosphoric acid esters. Journal of Applied Polymer Science76: 886–893.
115.
TroevKTsekovaATseviR (2000) Chemical degradation of polyurethanes: Degradation of flexible polyester polyurethane foam by phosphonic acid dialkyl esters. Journal of Applied Polymer Science78: 2565–2573.
116.
TsubouchiNOhtsukaY (2002) Nitrogen release during high-temperature pyrolysis of coals and catalytic role of calcium in N2 formation. Fuel81: 2335–2342.
117.
Van der WalH (1994) New chemical recycling process for polyurethanes. Journal of Reinforced Plastics and Composites13: 87–96.
118.
YamamotoNNakayamaAOshimaM, et al. (2007) Enzymatic hydrolysis of lysine diisocyanate based polyurethanes and segmented polyurethane ureas by various proteases. Reactive and Functional Polymers67: 1338–1345.
119.
YangWDongQLiuS, et al. (2012) Recycling and disposal methods for polyurethane foam wastes. Procedia Environmental Sciences16: 167–175.
120.
ZiaKMBhattiHNAhmad BhattiI (2007) Methods for polyurethane and polyurethane composites, recycling and recovery: A review. Reactive and Functional Polymers67: 675–692.
121.
ZieleniewskaMLeszczyńskiMKSzczepkowskiL, et al. (2016) Development and applicational evaluation of the rigid polyurethane foam composites with egg shell waste. Polymer Degradation and Stability132: 78–86.
