A one-dimensional integral model that predicts the auto-ignition time of wood under linearly increasing radiant heat flux is developed. The solution to the integral model for the ignition time is compared with measured data. Reasonable comparative results are shown for the ignition time of wood exposed to different heat flux increase rates (HFIR). Both the solutions and the measured data also show that the ignition time can be expressed as a power function and the power exponent is about 0.67.
Toal, B.R. , et al. (1989). An Examination of Piloted Ignition Characteristics of Cellulosic Materials using the ISO Ignitability Test , Fire and Materials, 14(3): 97–106 .
2.
Shields, T.J. , et al. (1994). Evaluating Ignition Data using the Flux Time Product , Fire and Materials, 18(4): 243–254 .
3.
Silcock, G.W.H. and Shields, T.J. (1995). A Protocol for Analysis of Time-to-Ignition Data from Bench Scale Tests , Fire Safety Journal, 24(1): 75–95 .
4.
Janssens, M.A. (1991). Thermal Model for Piloted Ignition of Wood Including Variable Thermophysical Properties , In: Fire Safety Science–Proceeding of the 3rd International Symposium, pp. 167–176 .
5.
Quintiere, J.G. and Hakleroad, M. (1985). New Concepts for Measuring Flame Spread Properties, In: Harmathy, T.Z. (ed.), Fire Safety Science and Engineering, ASTM STP 882, pp. 239–267, American Society for Testing and Materials, Philadephia .
6.
Tewarson, A. (1995). Generation of Heat and Chemical Compounds in Fires, In: The SFPE Handbook of Fire Protection Engineering, Section 3/ Chapter 4.
7.
Mikkola, E. and Wichman, I.S. (1989). On the Thermal Ignition of Combustible Materials , Fire and Materials, 14(3): 87–96 .
8.
Moghtaderi, B. et al. (1997). An Integral Model for the Transient Pyrolysis of Solid Materials , Fire and Materials, 21(1): 7–16 .
9.
Chen, Y. et al. (1993). Material Pyrolysis Properties, Part I: An Integral Model for One-dimensional Transient Pyrolysis of Charring and Non-charring Materials , Combustion Science and Technology, 88(5–6): 309–328 .
10.
Wichman, I.S. and Atreya, A. (1987). A Simplified Model for the Pyrolysis of Charring Materials , Combustion and Flame, 68(3): 231–247 .
11.
Parker, W.J. (1986). Prediction of the Heat Release Rate of Wood , In: Fire Safety Science–Proceedings of the First International Symposium, Hemisphere Publishing Corp., NY, pp. 207–216 .
12.
Quintiere, J.G.A Semi-Quantitative Model for the Burning Rate of Solid Materials, NISTIR 4840, National Institute of Standards and Technology, Gaithersburg, MD .
13.
Spearpoint, M.J.Predicting the Ignition and Burning Rate of Wood in the Cone Calorimeter using an Integral Model, NIST, GCR 99-775.
14.
Spearpoint, M.J. and Quintiere, J.G. (2001). Predicting the Piloted Ignition of Wood in the Cone Calorimeter using an Integral Model—Effect of Species, Grain Orientation and Heat Flux , Fire Safety Journal, 36(4): 391–415 .
15.
Spearpoint, M.J. and Quintiere, J.G. (2000). Predicting the Burning of Wood using an Integral Model . Combustion and Flame, 123(3): 308–325 .
16.
Yang, L. et al. (2005). Experimental Study on Spontaneous Ignition of Wood Exposed to Variable Heat Flux , Journal of Fire Sciences, 23(5): 405–416 .
17.
United States Department of Agriculture (1999). Wood Handbook, General Technical Report FPL-GTR-113.
