Behavior of Flame Spread Downward over Thick Wood Sheets and Heat Transfer Analysis

Abstract

To investigate the flame spreading mechanism over charring materials under natural convection, wood sheets from 0.9 to 3 mm thickness have been chosen. The variation of mean flame spread velocity V with thickness δ is measured. Typical flame shapes over the wood surfaces are recorded using CCD. The temperature fields in the gas phase are examined by a set of fine thermocouples. On the basis of the results, the relative contributions of local heat transfer modes ahead of the pyrolysis front have been evaluated. It is found that heat conduction through solid phase increases notably with δ. A flame spreading model coupled with a pyrolysis structure is proposed.

Keywords

wood sheets thermally thick charring material flame spread heat transfer modes

Get full access to this article

View all access options for this article.

References

Morandini, F. , Santoni, P.A. and Balbi, J.H. (2001). The Contribution of Radiant Heat Transfer to Laboratory-scale Fire Spread under the Influences of Wind and Slope , Fire Safety Journal, 36(6): 519–543 .

Fernandez-Pell, A.C. (1983). Controlling Mechanism of Flame Spread , Combustion Science Technology, 32(1-4): 1–31 .

Williams, F.A. (1977). Mechanisms of Fire Spread , In: Sixteen Symposium (International) on Combustion, The Combustion Institute, Cambridge, MA, USA, pp. 1281–1294 .

Suzuki, Masataro , Dobashi, Ritsu and Hirano, Toshisuke (1994). Behavior of Fires Spreading downward over Thick Paper , In: 25th Symposium (International) on Combustion, The Combustion Institute, Irvine, California, USA, pp. 1439–1446 .

Azhakesan, M.A. (2000). On the Nature, Influence and Magnitudes of Flame Heat Transfer during Surface Flame Spread , Fire Safety Journal, 35(3): 189–222 .

Hirano, Toshisuke , Noreikis, S.E. and Waterman, T.E. (1974). Postulations of Flame Spread Mechanisms , Combustion and Flame, 22(3): 353–363 .

Drysdale, D.D. and Macmillan, A.J.R. (1992). Flame Spread on inclined Surfaces , Fire Safety Journal, 18(3): 245–254 .

Ito, A. and Kashiwagi, T. (1988). Characterization of Flame Spread over PMMA Using Holographic Interferometer: Sample Orientation Effects , Combustion and Flame, 71(2): 189–204 .

Djebar, Baroudi (2003). A Discrete Dynamical Model for Flame Spread over Combustible Flat Solid Surfaces Subject to Pyrolysis with Charring— An Application Example to upward Flame Spread , Fire Safety Journal, 38(1): 53–84 .

10.

Wu, K.K. , Fan, W.F. , Chen, C.H. , Liou, T.M. and Pan, I.J. (2003). Downward Flame Spread over a thick PMMA Slab in an Opposed Flow Environment: Experiment and Modeling , Combustion and Flame, 132(4): 697–707 .

11.

Gao, Lijin , Suzuki, Masataro , Dobashi, Ritsu and Hirano, Toshisuke (1999). Heat Transfer near the Leading Flame Edge Spreading over a Cellulose Sheet Permeated with an Adhesive , Bulletin of Japanese Association of Fire Science and Engineering, 49(1): 19–25 .

12.

Sibulkin, Merwin and Lee, Calvin, K. (1974). Flame Propagation Measurements and Energy Feedback Analysis for Burning Cylinders , Combustion Science and Technology, 9(3-4): 137–147 .