On the Temperature Measurement Bias and Time Response of an Aspirated Thermocouple in Fire Environment

Abstract

To examine the uncertainty of thermocouple temperature measurements, the present study uses numerical simulations and analytical solutions to investigate the heat transfer processes associated with double shield aspirated thermocouple. This study is divided into two parts. First, 3D CFD calculations for real geometries are performed to understand the flow characteristics of double shielded aspirated thermocouples. Based on iso-thermal flow calculations for real geometry, conjugate heat transfer calculations for a 3D simplified geometry are performed to investigate the thermocouple radiative exchange errors that may be important in a fire environment. The results of the 3D heat transfer calculation are compared with algebraic solutions from a previously developed simple energy balance model and the algebraic model shows acceptable results compared to the 3D CFD model, despite its many assumptions and idealizations. A parametric study was conducted to quantify the thermocouple errors for various gas temperature and surrounding conditions. In this manner, the present study improves our understanding of the uncertainty of thermocouple temperature measurements.

Keywords

temperature measurement aspirated thermocouple fire test CFD.

Get full access to this article

View all access options for this article.

References

Rutherford, L. (2002). Pre-Flashover Fire Experiments in Two Adjacent ISO Compartments, Chapter 2. Experimental, MS Thesis University of Canterbury, New Zealand.

Shield, T.J. , Silcock, G.W.H. , Moghaddam, A.Z. , Azhakesan, M.A. and Zhang, J. (1999). A Comparison of Fire Retarded and Non-fire Retarded Wood-based Wall Linings Exposed to Fire in an Enclosure, Fire and Materials, 23(1): 17-25.

Hamins, A. , Maranghides, A. , McGrattan, K.B. , Ohlemiller, T.J. and Anleitner, R.L. (2005). Experiments and Modeling of Multiple Workstations Burning in a Compartment, NIST NCSTAR 1-5E, Federal Building and Fire Safety Investigation of the World Trade Center Disaster.

Fluent Inc., FLUENT 6.0 User's Guide, 2001.

Newman, J.S. and Croce, P.A. (1979). A Simple Aspirated Thermocouple for Use in Fire , Journal of Fire and Flammability, 10(4): 327-336.

Brohez, S. , Delvosalle, C. and Marlair, G. (2004). A Two-thermocouples Probe for Radiation Corrections of Measured Temperatures in Compartment Fires, Fire Safety Journal, 39(5): 399-411.

Blevins, L.G. and Pitts, W.M. (1999). Modeling of Bare and Aspirated Thermocouples in Compartment Fires, Fire Safety Journal, 33(4): 239-259.

Blevins, L.G. (1999). Behavior of Bare and Aspirated Thermocouples in Compartment Fires, In: Proceeding of the 33rd National Heat Transfer Conference, Albuquerque, New Maxico.

Glawe, G.E. , Simmons, F.S. and Stickney, T.M. (1953). Radiation and Recovery Corrections and Time Constants of Several Chromel-Alumel Thermocouple Probe in High Temperature, High Velocity Gas Streams, NACA TN3766.

10.

Fluent 6.0 user's guide. (2003). Fluent Inc.

11.

Burns, G.W. and Scroger, M.G. (1989). The Calibration of Thermocouples and Thermocouple Materials, Chapter 2. Principles of Thermoelectric Thermometry, NIST Special Publication 250-35, Gaithersburg, MD.

12.

Launder, B.E. and Spalding, D.B. (1974). The Numerical Computation of Turbulent Flows, Computer Methods in Applied Mechanics and Engineering, 3(2): 269-289.

13.

Akers, A. , Gassman, M. and Smith, R. (2006). Hydraulic Power System Analysis, Chapter 5. Linear System Analysis, CRC, Talyor and Francis.