Fire Structural Modeling of Polymer Composites with Passive Thermal Barrier

Abstract

A coupled thermo-mechanical model is presented for calculating the compressive strength and failure of polymer laminated composites with thermal barrier when exposed to fire. Thermal barriers are used to protect composite structures from fire, and this article presents a model for calculating the improved structural survivability under compression loading. The thermal component of the model predicts the through-thickness temperature profile of the composite when protected from fire using a passive thermal barrier insulation material. The thermal analysis is coupled to a mechanical model that calculates the loss in compressive strength with increasing temperature and heating time. The model predicts the strength loss and failure time of an insulated composite supporting a static compressive load when exposed to fire. The accuracy of the model is evaluated using failure times measured in fire-under-compression load tests on a woven E-glass/vinyl ester composite protected with a passive thermal barrier. The model predicts reductions to the failure time with increasing heat flux (temperature), applied compressive stress, and reduced insulation thickness, and this is confirmed by experimental testing. It is envisaged that the thermo-mechanical model is a useful analytical method to design thermal barrier material systems to protect composite structures exposed to high temperature or fire.

Keywords

fire resistance fire protection composites.

Get full access to this article

View all access options for this article.

References

Feih, S. , Mathys, Z. , Gibson, A.G. and Mouritz, A.P. ( 2007). Modelling the Compression Strength of Polymer Laminates in Fire, Composites Part A, 38(11): 2345-2365.

Gibson, A.G. , Wu, Y.S. , Evans, J.T. and Mouritz, A.P. (2004). Laminate Theory Analysis of Composites under Load in Fire, Journal of Composite Materials , 40(7): 1283-1307.

Boyd, S.E. , Bausano, J.V. , Case, S.W. and Lesko, J.J. ( 2007). Compression Creep Rupture Behavior of a Glass/Vinyl Ester Composite Subject to Isothermal and One-sided Heat Flux Conditions, Composites Part A, 38(6): 1462-1472.

Mouritz, A.P. and Gibson, A.G. ( 2006). Fire Properties of Polymer Composite Materials, Springer, Dordrecht.

Browne, T.N.A. ( 2006). Fire Behaviour of Composite Laminates, PhD Thesis, University of Newcastle-upon-Tyne.

Gu, P. and Asaro, R.J. ( 2005). Structural Buckling of Polymer Matrix Composites due to Reduced Stiffness from Fire Damage, Composite Structures , 69(1): 65-75.

Gibson, A.G. , Wright, P.N.G. , Wu, Y.S. , Mouritz, A.P. , Mathys, Z. and Gardiner, C.P. ( 2003). Modelling Residual Mechanical Properties of Polymer Composites After Fire, Plastics, Rubbers and Composites, 32(2): 81-90.

Liu, L. , Holmes, J.W. , Kordomateas, G.A. and Burman, V. ( 2005). Compressive Response of Composites under Combined Fire and Compression Loading. In: Proceedings of the 4th Conference on Composites in Fire, Newcastle-upon-Tyne, UK.

Zhou, A. and Keller, T. ( 2005). Structural Response of FRP Elements under Combined Thermal and Mechanical Loading: Experiments and Analysis, In: Proceedings of the 4th Conference on Composites in Fire, Newcastle-upon-Tyne, UK.

10.

Sorathia, U. , Gracik, T. , Ness, J. , Durkin, A. , Williams, F. , Hunstad, M. and Berry, F. ( 2003). Evaluation of Intumescent Coatings for Shipboard Fire Protection, Journal of Fire Sciences, 21(6): 423-450.

11.

Brown, J.R. , Mathys, Z. , Riddell, S.Z. and Wake, L.V. ( 1995). Fire-retardant Performance of Some Surface Coatings for Naval Ship Interior Applications, Fire and Materials, 19(3): 109-118.

12.

Sorathia, U. and Beck, C. ( 1996). Fire Protection of Glass/Vinyl Ester Composites for Structural Applications, In: Proceedings of the 41st International SAMPE Symposium, Anaheim, California, pp. 687-697.

13.

Tewarson, A. and Macaione, D.P. (1993). Polymers and Composites - An Examination of Fire Spread and Generation of Heat and Fire Products, Journal of Fire Sciences, 11(5): 421-441.

14.

Mouritz, A.P. and Mathys, Z. (2001). Post-fire Mechanical Properties of Glass-reinforced Polyester Composites, Composites Science and Technology, 61(4): 475-490.

15.

Kandola, B.K. and Horrocks, A.R. (1998). Flame Retardant Composites, a Review: The Potential for Use of Intumescents, In: Delobel, R. (ed.), Fire Retardancy of Polymers - The Use of Intumescence, The Royal Society of Chemistry, Cambridge, pp. 395-417

16.

Quershi, S.P. and Krassowski, D.W. (1997). Intumescent Resin System for Improving Fire Resistance of Composites, In: Proceedings of the 29th International SAMPE Technical Conference, Orlando, Florida, pp. 625-629.

17.

Feih, S. , Mathys, Z. , Gibson, A.G. and Mouritz, A.P. ( 2007). Tensile Strength Modeling of Glass-fiber Polymer Composites in Fire, Journal of Composite Materials, 41(19): 2387-2410.

18.

Feih, S. , Mathys, Z. , Gibson, A.G. and Mouritz, A.P. ( 2008). Modelling Compressive Skin Failure of Sandwich Composites in Fire, Journal of Sandwich Structures and Materials, 10(3): 217-245.

19.

Mouritz, A.P. and Mathys, Z. (1999). Post-fire Mechanical Properties of Marine Polymer Composites, Composite Structures , 47(1-4): 643-653.

20.

Mouritz, A.P. and Mathys, Z. (2000). Mechanical Properties of Fire-damaged Glass-reinforced Phenolic Composites, Fire and Materials, 24(2): 67-75.

21.

Mouritz, A.P. and Gardiner, C.P. (2002). Post-fire Properties of Sandwich Polymer Composites, Composites Part A, 33(5): 609-620.

22.

Mathys, Z. , Gardiner, C.P. and Mouritz, A.P. ( 2002). Tensile and Compressive Properties of GRP Composites with Localised Heat Damage, Applied Composite Materials, 9(6): 353-367.

23.

Mouritz, A.P. (2003). Simple Models for Determining the Mechanical Properties of Burnt FRP Composites, Materials Science and Engineering A, 359(1-2): 237-246.

24.

Mouritz, A.P. (2003). Fire Resistance of Aircraft Composite Laminates, Journal of Materials Science Letters , 22(21): 1507-1509.

25.

Mouritz, A.P. , Mathys, Z. and Gardiner, C.P. (2004). Thermomechanical Modelling the Fire Properties of Fibre-polymer Composites, Composites Part B, 35(6-8): 467-474.

26.

Gibson, A.G. , Wu, Y.S. , Chandler, H.W. , Wilcox, J.A.D. and Bettess, P. ( 1995). A Model for the Thermal Performance of Thick Composite Laminates in Hydrocarbon Fires, Revue de L’Institut Francais du Petrole, 50(1): 69-74.

27.

Henderson, J.B. , Wiebelt, J.A. and Tant, M.R. (1985). A Model for the Thermal Response of Polymer Composite Materials with Experimental Verification, Journal of Composite Materials, 19: 579-595.

28.

Bartholmai, M. , Schriever, R. and Schartel, B. (2003). Influence of External Heat Flux and Coating Thickness on the Thermal Insulation Properties of Two Different Intumescent Coatings Using Cone Calorimeter and Numerical Analysis , Fire and Materials, 27(4): 151-162.

29.

Regnier, N. and Mortaigne, B. (1995). Analysis by Pyrolysis/Gas Chromatography/Mass Spectrometry of Glass Fibre/Vinyl Ester Thermal Degradation Products, Polymer Degradation and Stability, 49(3): 419-428.