Experimental tests were carried out with an adapted bench-scale mass loss calorimeter (MLC) and also in an outdoor wind tunnel to estimate the heat release rate (HRR) of a forest fuel bed. The MLC apparatus uses a calibrated thermopile to quantify the HRR, as an alternative to the classical measurement of oxygen consumption due to combustion. Additional calibration of thermocouples to measure gas temperatures enabled estimation of HRR in experimental burnings conducted in the wind tunnel. The results showed a reasonable agreement between peak HRR (PHRR) values obtained in the MLC and in the wind tunnel, and also demonstrated that PHRR was significantly affected by the wind speed and the rate of spread. The proposed procedure is potentially useful as an initial step in monitoring HRR in outdoor forest fire experiments.
Pastor, E., Zarate, L., Planas, E. and Arnaldos, J. ( 2003). Mathematical Models and Calculation Systems for the Study of Wildland Fire Behaviour, Progress in Energy and Combustion Science, 29: 139-153.
2.
Sullivan. A.L. (2009). Wildland Surface Fire Spread Modelling, 1990-2007. 1: Physical and Quasi-Physical Models, International Journal of Wildland Fire, 18(4): 349-368.
3.
Schemel, C.F. , Simeoni, A., Biteau, H., Rivera, J.D. and Torero, J.L. (2008). A Calorimetric Study of Wildland Fuels, Experimental Thermal and Fluid Science , 32(7): 1381-1389.
4.
Babrauskas, V. and Peacock R.D. (1992). Heat Release Rate: The Single Most Important Variable in Fire Hazard, Fire Safety Journal, 18: 255-272.
5.
Janssens, M.L. ( 2001). Heat Release Rate (HRR), In: Ohlemiller, T.J., Johnson, E.L. and Gann, R.G. (eds), Proceedings of an International Workshop (NISTIR 6527), Measurement Needs for Fire Safety, National Institute of Standard and Technology, Gaithersburg , 4-7 April, pp. 186-200.
6.
Babrauskas, V. (1984). Development of the Cone Calorimeter - A Bench-scale Heat Release Rate Apparatus Based on Oxygen Consumption , Fire Materials, 8: 81-95.
7.
Babrauskas, V. ( 2002). The Cone Calorimeter, In: Society of Fire Protection Engineering (ed.), SFPE Handbook of Fire Protection Engineering , 3rd edn, pp. 3-63-3-81, National Fire Protection Association, Quincy, Mass.
8.
International Organization for Standardization ( 2001). Simple Heat Release Test Using a Conical Radiant Heater and a Thermopile Detector (ISO 13927), International Organization of Standardization, Geneva.
9.
Wickström, U. and Göransson , U. (1987). Prediction of Heat Release Rates of Surface Materials in Large-scale Fire Tests Based on Cone Calorimeter Results, Journal of Testing and Evaluation, 15(6): 364-370.
10.
Gill, A.M. and Knight, I.K. ( 1991). Fire Measurement, In: Cheney, N.P. and Gill, A.M. (eds), Bushfire Modelling and Fire Danger Rating System, pp. 137-146, CSIRO Division of forestry, Canberra.
11.
Linn, R.R. ( 1997). A Transport Model for Prediction of Wildfire Behavior , Los Alamos National Laboratory, Science Report LA13334-T, Los Alamos, NM.
12.
Babrauskas, V. (2006). Effective Heat of Combustion for Flaming Combustion of Conifers, Canadian Journal of Forest Research, 36: 659-663.
13.
Madrigal, J., Hernando, C., Guijarro, M., Díez, C., Marino E. and De Castro, A.J. ( 2009). Evaluation of Forest Fuel Flammability and Combustion Properties with an Adapted Mass Loss Calorimeter Device, Journal of Fire Sciences, 27(4): 323-342.
14.
Smith, E.E. ( 1996). Heat Release Rate Calorimetry, Fire Technology , 32: 334-347.
15.
Filipczak, R. , Crowley S. and Lyon, R.E. (2005). Heat Release Rate Measurements of Thin Samples in the OSU Apparatus and the Cone Calorimeter, Fire Safety Journal, 40: 628-645.
16.
Hernando, C. and Guijarro, M. ( 1998). Temperature Regime in Pinus pinaster and P. halepensis Trunks, In: Viegas, D.X. (ed.), Proceedings of the III International Conference on Forest Fire Research, - 14th Conference on Fire and Forest Meteorology, Luso, Portugal, Vol I, pp. 801-813.
17.
Mendes-Lopes, J.M.C., Ventura, J.M.P. and Santos N.M.G. ( 2008). Mutual influence between surface fire propagation and tree trunk, In: De las Heras, J., Brebbia, C.A., Viegas, D. and Leone, V. (eds), Modelling, Monitoring and Management of Forest Fires, pp. 131-141, Wit Press, Southampton, Boston.
18.
European Commission (1997 ). SBI Round Robins Results [online], Available at: http://europa.eu.int/comm/enterprise/construction/internal/essreq/fire/sbiround/sbirep.htm (accessed date September 1, 2008)
19.
Weber, R.O. , Gill, A.M., Lyons, P.R.A. and Mercer, G.N. (1995). Time Dependence of Temperatures above Wildland Fires, CALM Science Supplement , 4: 17-22.
20.
White, R.H., Weise, D.R., Mackes, K. and Dibble, A.C. ( 2002). Cone Calorimeter Testing of Vegetation: An Update, In: Proceedings of the 35th International Conference on Fire Safety, Products Safety Corporation, Sissonville, 22-24 July, pp. 1-12.
21.
Wold, H. ( 1985). Partial Least Squares, In: Kotz, S. and Johnson, N.L. (eds), Encyclopedia of Statisitical Sciences, Vol. 6, pp. 581-591, John Wiley & Spms, New York.
22.
Dibble, A.C. , White, R.H. and Lebow P.K. (2007). Combustion Characteristics of North-eastern USA Vegetation Tested in the Cone Calorimeter: Invasive Versus Non-invasive Plants, International Journal of Wildland Fire , 16: 426-443.
23.
Weise, D.R. , White, R.H., Beall, F.C. and Etlinger, M. (2005). Use of the Cone Calorimeter to Detect Seasonal Differences in Selected Combustion Characteristics of Ornamental Vegetation, International Journal of Wildland Fire, 14: 321-338.
