In this study, we investigated the basic knowledge necessary to develop flame-retarded wood–plastic composite (WPC) materials by focusing on decking boards. Therefore, the respective effects of geometry, material composition, and moisture were studied by performing cone calorimetric measurements. Using hollow-shaped geometries removes combustible material and reduces the fire load but simultaneously increases fire propagation. The best results were achieved by using high-wood contents. The addition of talc can reduce the intensity of burning. Moisture also has a positive effect on burning behavior. Apart from the well-known mechanism of water, a change was observed in the resultant residue.
GrexaOLübkeH. Flammability parameters of wood tested on a cone calorimeter. Polymer Degradation and Stability2001; 74(3): 427–432.
2.
HaradaT. Time to ignition, heat release rate and fire endurance time of wood in cone calorimeter test. Fire and Materials2001; 25(4): 161–167.
3.
TranHCWhiteRH. Burning rate of solid wood measured in a heat release rate calorimeter. Fire and Materials1992; 16(4): 197–206.
4.
MohanDPittmanCUSteelePH. Pyrolysis of wood/biomass for bio-oil: A critical review. Energy & Fuels2006; 20(3): 848–889.
5.
EvansRJMilneTA. Molecular characterization of the pyrolysis of biomass. Energy & Fuels1987; 1(2): 123–137.
6.
Di Nenno PJ, Drysdale D, Beyler CL, Walton WD, Custer RLP, Hall JR, Watts JM. Appendices, SFPE handbook of fire protection engineering. 3rd edn. Quincy, Massachusetts: National Fire Protection Association, 2002, A40–A42.
7.
KruseTMWongH-WBroadbeltLJ. Mechanistic modeling of polymer pyrolysis: Polypropylene. Macromolecules2003; 36(25): 9594–9607.
8.
StarkNMWhiteRHMuellerSAOsswaldTA. Evaluation of various fire retardants for use in wood flour-polyethylene composites. Polymer Degradation and Stability2010; 95(9): 1903–1910.
9.
BraunUSchartelB. Flame retardant mechanisms of red phosphorus and magnesium hydroxide in high impact polystyrene. Macromolecular Chemistry and Physics2004; 205(16): 2185–2196.
10.
BrydenKMHaggeMJ. Modeling the combined impact of moisture and char shrinkage on the pyrolysis of a biomass particle [small star, filled]. Fuel2003; 82(13): 1633–1644.
11.
WeilEDLevchikSV. Flame retardants in commercial use or development for polyolefins. Journal of Fire Sciences2008; 26(1): 5–43.
12.
Le BrasMDuquesneSFoisMGriselMPoutchF. Intumescent polypropylene/flax blends: A preliminary study. Polymer Degradation and Stability2005; 88(1): 80–84.
13.
BraunUBahrHSturmHSchartelB. Flame retardancy mechanisms of metal phosphinates and metal phosphinates in combination with melamine cyanurate in glass-fiber reinforced poly(1,4-butylene terephthalate): The influence of metal cation. Polymers for Advanced Technologies2008; 19(6): 680–692.
14.
SchartelBBraunUSchwarzUReinemannS. Fire retardancy of polypropylene/flax blends. Polymer2003; 44(20): 6241–6250.
15.
ISO 5660-1:2002. Reaction-to-fire tests - heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) Geneva, Switzerland, 2002.
16.
SergeBMichel LeBSophieDMarylineR. Recent advances for intumescent polymers. Macromolecular Materials and Engineering2004; 289(6): 499–511.
17.
GilmanJWJacksonCLMorganABHarrisRManiasEGiannelisEPWuthenowMHiltonDPhillipsSH. Flammability properties of polymer layered-silicate nanocomposites. Polypropylene and Polystyrene Nanocomposites Chemistry of Materials2000; 12(7): 1866–1873.
18.
ScudamoreMJBriggsPJPragerFH. Cone calorimetry—a review of tests carried out on plastics for the association of plastic manufacturers in Europe. Fire and Materials1991; 15(2): 65–84.
19.
SchartelBHullTR. Development of fire-retarded materials—interpretation of cone calorimeter data. Fire and Materials2007; 31(5): 327–354.
20.
SpearpointMJQuintiereJG. Predicting the burning of wood using an integral model. Combustion and Flame2000; 123(3): 308–325.
21.
Di BlasiC. Modeling chemical and physical processes of wood and biomass pyrolysis. Progress in Energy and Combustion Science2008; 34(1): 47–90.
22.
BeaumontOSchwobY. Influence of physical and chemical parameters on wood pyrolysis. Industrial & Engineering Chemistry Process Design and Development1984; 23(4): 637–641.
23.
MontgomeryRB. Viscosity and thermal conductivity of air and diffusivity of water vapor in air. Journal of Meteorology1947; 4(6): 193–196.
24.
ChiaLHLChuaPHLeeEEN. A preliminary study on the thermal conductivity and flammability of WPC based on some tropical woods. Radiation Physics and Chemistry (1977)1985; 26(4): 423–432.
25.
KitanoTKataokaTShirotaT. An empirical equation of the relative viscosity of polymer melts filled with various inorganic fillers. Rheologica Acta1981; 20(2): 207–209.
