Thermal and damage analysis of laser-induced decomposition within carbon/epoxy composite laminates

Abstract

Fire-induced decomposition of composite materials used for aircraft structures involves complex and coupled multi-physics phenomena studied through conventional standard tests such as cone calorimeter, FAR25.856(b):2003 and ISO2685:1998(e), for instance. It is proposed to address this issue within controlled environment and accurate heat loading. Thermal response and damage evolution are investigated experimentally and numerically to analyse the anisotropic and heterogeneous behaviour of decomposing composite laminates subjected to laser heating and confined within the test chamber of the BLADE facility developed at ONERA. Accurate heat transfer measurements are correlated with numerical results from MoDeTheC solver and post-decomposition micrographic imaging in order to analyse the material thermo-chemical behaviour and identify the damage mechanisms.

Keywords

Composite laminates carbon fibres epoxy resin T700GC/M21 pyrolysis oxidation delamination infrared thermography BLADE facility MoDeTheC solver

Get full access to this article

View all access options for this article.

References

Mouritz

Gibson

Fire properties of polymer composite materials. Dordrecht: Springer, 2006.

Mouritz

Feih

Kandare

. Review of fire structural modelling of polymer composites. Compos Part A: Appl S 2009; 40(12): 1800–1814.

Henderson

Wiebelt

Tant

A model for the thermal response of polymer composite materials with experimental verification. J Compos Mater 1985; 19(6): 579–595.

Henderson

Wiecek

A mathematical model to predict the thermal response of decomposing, expanding polymer composites. J Compos Mater 1987; 21(4): 373–393.

Stoliarov

Leventon

Lyon

Two-dimensional model of burning for pyrolyzable solids. Technical report DOT/FAA/TC-TN12/59, March 2013. Renton, WA: Federal Aviation Administration.

Lautenberger

GPyro3D: a three dimensional generalized pyrolysis model. In: Fire safety science: proceedings of the 11th international symposium, University of Canterbury, Christchurch, New Zealand, 10–14 February 2014, pp. 193–207. London: International Association for Fire Safety Science.

Lachaud

van Eekelen

Scoggins

. Detailed chemical equilibrium model for porous ablative materials. Int J Heat Mass Tran 2015; 90: 1034–1045.

Chen

Luo

Lua

. A direct coupling approach for fire and composite structure interaction. In: Proceedings of the 17th international conference on composite materials, Edinburgh, 27–31 July 2009.

Lautenberger

Fernandez-Pello

Generalized pyrolysis model for combustible solids. Fire Safety J 2009; 44(6): 819–839.

10.

Reulet

Leplat

. An inverse method for experimental determination of temperature dependent thermal conductivities and specific heat of orthotropic materials. In: Proceedings of the international thermal conductivity conference (ITCC 2011), Chicoutimi, QC, Canada, 26–30 June 2011.

11.

Leplat

Biasi

. Experimental and numerical thermal response analysis of laser-induced composite decomposition. In: Proceedings of the 15th fire retardancy and protection of materials meeting (FRPM 2015), Berlin, 22–25 June 2015.

12.

Beck

Blackwell

St. Clair

Inverse heat conduction. New York: John Wiley and Sons, Inc., 1985.

13.

Biasi

Leplat

Feyel

. Heat and mass transfers within decomposing carbon fibers/epoxy resin composite materials. In: Proceedings of the 11th AIAA/ASME joint thermophysics and heat transfer conference, Atlanta, GA, 18 June 2014.

14.

Biasi

Modélisation Thermique de la Dégradation d’un Matériau Composite Soumis au Feu [Thermal modelling of fire-induced decomposition of composite materials]. PhD Thesis, Université de Toulouse, Toulouse, 2014, http://www.theses.fr/2014ESAE0034 (in French).

15.

Biasi

Leplat

Feyel

. Numerical modeling and experimental validation of heat and mass transfer within decomposing carbon fibers/epoxy resin composite laminates. Int J Heat Mass Tran (to be submitted), 2016.