Evaluation and risk communication of the effects of alcohol exposure on disposable procedure masks and portable air purifiers in hospital environments

Abstract

Electret technology was widely used to prevent the airborne transmission of bioaerosols during the COVID-19 pandemic and improve the filtration efficiency of masks and high-efficiency particulate air (HEPA) filters. As alcohol disinfectants are widely used in medical and welfare institutions, concerns about alcohol exposure inactivating electret exist. However, comprehensive alcohol exposure tests have not been conducted on masks and HEPA filters distributed in Japan. Twenty-five types of masks and five types of HEPA filters were subjected to a discharging process according to ISO 16890 to quantitatively elucidate the resistance to alcohol exposure. Measurements of changes in filtration efficiency and pressure drop before and after discharge show that 17 masks (68%) and four HEPA filters (80%) exhibited a significant decrease in filtration efficiency, confirming their vulnerability to alcohol. In addition, a survey (n = 500 Japanese adults, including 30 healthcare professionals) revealed that ∼90% of the general public were unaware that alcohol exposure could degrade masks and air purifiers. Furthermore, 36% of the surveyed healthcare professionals had sprayed alcohol directly onto their masks. The effectiveness of user warnings through product labels and instructions was investigated from the perspective of ensuring the safety of patients and healthcare professionals. Results revealed that the best approach was to describe the extent and duration of the adverse effects caused by disregarding precautions. Increase in awareness of healthcare professionals and general public by authorities and manufacturers through guidelines and warning labels would reduce the risk of inhaling bioaerosols caused by unintentional electret inactivation.

Keywords

Alcohol exposure severe acute respiratory syndrome coronavirus 2 health communication mask efficiency product labeling

Get full access to this article

View all access options for this article.

References

Center for Disease Control and Prevention (CDC) (2021) The National Personal Protective Technology Laboratory (NPPTL): beyond shelf life/stockpiled assessment results. Available at: https://www.cdc.gov/niosh/npptl/respirators/testing/ExpiredN95results.html (accessed 15 February 2023).

Duncan

Bodurtha

Naqvi

(2021) The protective performance of reusable cloth face masks, disposable procedure masks, KN95 masks and N95 respirators: filtration and total inward leakage. PLoS One 16(10): e0258191.

Gondo

Wada

Kanehashi

, et al. (2011) Effects of alcohol solvent-induced crystallization on biodegradable poly (lactic acid) film. Journal of Packaging Science and Technology 20(6): 501–511.

International Organization for Standardization (ISO) . 16890-4: 2016 Air Filters for General Ventilation – Conditioning Method to Determine the Minimum Fractional Test Efficiency. Switzerland: International Organization for Standardization (ISO).

Ishigaki

(2022) Application of electret technology in masks. Proceedings of the Institute of Electrostatics Japan 46(2).

Ministry of Health, Labour and Welfare (MHLW) (2020) To managers of commercial facilities: how to improve “poorly ventilated enclosed spaces” in winter. Available at: https://www.mhlw.go.jp/content/000698868.pdf (accessed 15 February 2023).

Nishimura

(2011) Virological evaluation of electrical devices advertising inactivation of air-borne influenza virus. Kansenshogaku zasshi. The Journal of the Japanese Association for Infectious Diseases 85(5): 537–539. DOI: 10.11150/kansenshogakuzasshi.85.537.

Pei

Kim

, et al. (2020) Evaluation of decontamination methods for commercial and alternative respirator and mask materials–view from filtration aspect. Journal of Aerosol Science 150: 105609. DOI: 10.1016/j.jaerosci.2020.105609.

Prime Minister’s Office of Japan (PMOJ) (2021) Preventing the spread of COVID-19. Available at https://corona.go.jp/en/prevention/pdf/en.boushi_green20210721.pdf (accessed 15 February 2023).

10.

Qian

Sun

, et al. (2010) Particle removal efficiency of the portable HEPA air cleaner in a simulated hospital ward. Building Simulation 3: 215–224. DOI: 10.1007/s12273-010-0005-4.

11.

Schuldt

Däuber

Engelke

, et al. (2020) Air filters for indoor environments: interlaboratory evaluation of the new international filter testing standard ISO 16890. Indoor Air 30(3): 473–480. DOI: 10.1111/ina.12660.

12.

Zhang

Chen

Bhat

, et al. (2020) Electret characteristics of melt-blown polylactic acid fabrics for air collection application. Journal of Applied Polymer Science 137(4): 48309. DOI: 10.1002/app.48309.

Supplementary Material

Please find the following supplemental material available below.

For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.

For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.

0.00 MB

0.10 MB