Poly(vinyl alcohol)-based electrospun meshes as potential candidate scaffolds in regenerative medicine

Abstract

Fibrous meshes based on three different poly(vinyl alcohol) (PVA) polymers, with 12% vinyl acetate monomeric units and molar weights of 37,000, 67,000, and 130,000 were developed as potential scaffolds for regenerative medical applications. The meshes were electrospun and characterized by molecular weight, concentration, applied voltage, and needle—collector distance. The influence of feed rate and the electrodes configuration (needle-to-tip and screen-to-screen system) was determined. Highly porous, 3D structures composed of randomly oriented ultrafine fibers, with an average fiber diameter of a few hundred nanometers were developed. Solutions of PVA and human serum albumin were successfully electrospun and the fibrous mesh was stabilized with glutaraldehyde. The influence of these operations on the mechanical properties was evaluated by uniaxial tensile testing.

Keywords

biomaterials electrospinning nanofibers poly(vinylalcohol)polymer processing

Get full access to this article

View all access options for this article.

References

Mason C. and Dunnill P. A brief definition of regenerative medicine. Reg Med 2007; 3: 1-5.

Puppi D. , Chiellini F. , Piras AM and Chiellini E. Polymeric materials for bone and cartilage repair. Prog Polym Sci 2010; 35: 403-440.

Pham QP , Sharma U. and Mikos AG Electrospinning of polymeric nanofibers for tissue engineering applications: a review. Tissue Eng 2006; 12: 1197-1211.

Detta N. , Puppi D. , Errico C. , Chiellini F. , Piras AM and Chiellini E. Polymeric nanofiber constructs in drug delivery and tissue engineering . In: Chaughule RS and Ramanujan R (eds) Nanoparticles: synthesis, characterization and applications. Stevenson Ranch, CA : American Scientific Publishers, 2010, pp.271-291.

Stevens MM and George JH Exploring and engineering the cell surface interface. Science 2005; 310: 1135-1138.

Kim TG , Lee DS and Park TG Controlled protein release from electrospun biodegradable fiber mesh composed of poly(ε-caprolactone) and poly(ethylene oxide). Int J Pharm 2007; 338: 276-283.

Maretschek S. , Greiner A. and Kissel T. Electrospun biodegradable nanofiber nonwovens for controlled release of proteins. J Control Release 2008; 127: 180-187.

Nikkola L. , Seppälä J. , Harlin A. , Ndreu A. and Ashammakhi N. Electrospun multifunctional diclofenac sodium releasing nanoscaffold . J Nanosci Nanotechnol 2006; 6: 3290-3295.

Piras AM , Nikkola L. , Chiellini F. , Ashammakhi N. and Chiellini E. Development of diclofenac sodium releasing bio-erodible polymeric nanomats . J Nanosci Nanotechnol 2006; 6: 3310-3320.

10.

Jiang H. , Fang D. , Hsiao B. , Chu B. and Chen W. Preparation and characterization of ibuprofenloaded poly(lactide-co-glycolide)/poly(ethylene glycol)-g-chitosan electrospun membranes. J Biomater Sci Polym Ed 2004; 15: 279-296.

11.

Piras AM , Chiellini F. , Chiellini E. , Nikkola L. and Ashammakhi N. New multicomponent bioerodible electrospun nanofibers for dual-controlled drug release. J Bioact Compatible Polym 2008 ; 23: 423-443.

12.

Zong X. , Kim K. , Fang D. , Ran S. , Hsiao BS and Chu B. Structure and process relationship of electrospun bioabsorbable nanofiber membranes. Polymer 2002; 43: 4403-4412.

13.

Zong XH , Li S. , Chen E. , Garlick B. , Kim K. -S, Fang D. , et al. Prevention of Postsurgery-induced abdominal adhesions by electrospun bioabsorbable nanofibrous poly(lactide-co-glycolide)-based membranes. Ann Surg 2004; 240: 910-915.

14.

Volpato FZ , Ramos SLF , Motta A. and Migliaresi C. Physical and in-vitro biological evaluation of a PA6/MWCNT electrospun composite for biomedical applications. J Bioactive Compat Polym 2011; 26: 35-47.

15.

Puppi D. , Piras AM , Detta N. , Dinucci D. and Chiellini F. Poly(lactic-co-glycolic acid) electrospun fibrous meshes for the controlled release of retinoic acid. Acta Biomater 2010 ; 6: 1258-1268.

16.

Xie J. and Wang C. -H. Electrospun micro- and nanofibers for sustained delivery of paclitaxel to treat C6 Glioma in vitro. Pharm Res 2006 ; 23: 1817-1826.

17.

Puppi, D. , Piras, A.M. , Chiellini, F. , Chiellini, E. , Martins, A. , Leonor, I.B. et al. Optimized electro-and wet-spinning techniques for the production of polymeric fibrous scaffolds loaded with bisphosphonate and hydroxyapatite , J Tissue Eng Regen Med 2010, doi: 10.1002/term.310.

18.

Luu YK , Kim K. , Hsiao BS , Chu B. and Hadjiargyrou M. Development of a nanostructured DNA delivery scaffold via electrospinning of PLGA and PLA-PEG block copolymers. J Control Release 2003; 89: 341-353.

19.

Chew SY , Wen J. , Yim EKF and Leong KW Sustained release of proteins from electrospun biodegradable fibers . Biomacromolecules 2005; 6: 2017-2024.

20.

Sill TJ and von Recum HA Electrospinning: applications in drug delivery and tissue engineering . Biomaterials 2008; 29: 1989-2006.

21.

Chiellini E. , Corti A. , D’Antone S. and Solaro R. Biodegradation of poly(vinyl alcohol) based materials. Prog Polym Sci 2003; 28: 963-1014.

22.

Pereira APV , Vasconcelos WL and Oréfice RL Novel multicomponent silicate-poly(vinyl alcohol) hybrids with controlled reactivity . J Non-Cryst Solids 2000; 273: 180-185.

23.

Tang Y-F. , Du Y-M. , Hu X-W. , Shi X-W. and Kennedy JF Rheological characterisation of a novel thermosensitive chitosan/poly(vinyl alcohol) blend hydrogel. Carbohydr Polym 2007 ; 67: 491-499.

24.

Mansur HS , Sadahira CM , Souza AN and Mansur AAP. FTIR spectroscopy characterization of poly (vinyl alcohol) hydrogel with different hydrolysis degree and chemically crosslinked with glutaraldehyde . Mater Sci Eng C 2008; 28: 539-548.

25.

Finch CA. (ed.) Polyvinyl alcohol, properties and applications. New York : Wiley, 1973.

26.

Hassan C. and Peppas N. Structure and applications of poly(vinyl alcohol) hydrogels produced by conventional crosslinking or by freezing/thawing methods. In: Dušek K (ed.) Biopolymers PVA hydrogels, anionic polymerisation nanocomposites. Berlin, Heidelberg : Springer-Verlag, 2000 , pp.37-65.

27.

Finch CA Appendix 2 health and toxicity regulations relating to polyvinyl alcohol . In: Finch CA (ed.) Polyvinyl alcohol developments. Aylesbury, UK: John Wiley & Sons, 1992, pp.763-765.

28.

Yamaoka T. , Tabata Y. and Ikada Y. Comparison of body distribution of poly(vinyl alcohol) with other water-soluble polymers after intravenous administration. J Pharm Pharmacol 1995; 47: 479-486.

29.

Bin D. , Hak-Yong K. , Se-Chul L. , Chang-Lu S. , Douk-Rae L. , Soo-Jin P. , et al. Preparation and characterization of a nanoscale poly(vinyl alcohol) fiber aggregate produced by an electrospinning method. J Polym Sci Part B: Polym Phys 2002; 40: 1261-1268.

30.

Zhang C. , Yuan X. , Wu L. , Han Y. and Sheng J. Study on morphology of electrospun poly(vinyl alcohol) mats. Eur Polym J 2005; 41: 423-432.

31.

Koski A. , Yim K. and Shivkumar S. Effect of molecular weight on fibrous PVA produced by electrospinning . Mater Lett 2004; 58: 493-497.

32.

Jun Z. , Hou H. , Wendorff JH and Greiner A. Poly(vinyl alcohol) nanofibres by electrospinning: influence of molecular weight on fibre shape. e-Polymers 2005; 38: 1-7.

33.

Yao L. , Haas TW , Guiseppi-Elie A. , Bowlin GL , Simpson DG and Wnek GE Electrospinning and stabilization of fully hydrolyzed poly(vinyl alcohol) fibers. Chem Mater 2003; 15: 1860-1864.

34.

Son WK , Youk JH , Lee TS and Park WH Effect of pH on electrospinning of poly(vinyl alcohol). Mater Lett 2005; 59: 1571-1575.

35.

Shao C. , Kim H-Y. , Gong J. , Ding B. , Lee D-R. and Park S-J. Fiber mats of poly(vinyl alcohol)/silica composite via electrospinning . Mater Lett 2003; 57: 1579-1584.

36.

Gong J. , Li X-D. , Ding B. , Lee D-R. and Kim H-Y. Preparation and characterization of H4SiMo12O40/poly(vinyl alcohol) fiber mats produced by an electrospinning method. J Appl Polym Sci 2003; 89: 1573-1578.

37.

Siddheswaran R. , Sankar R. , Babu MR , Rathnakumari M. , Jayavel R. , Murugakoothan P. , et al. Preparation and characterization of ZnO nanofibers by electrospinning. Cryst Res Technol 2006; 41: 446-449.

38.

Hong KH , Park JL , Sul IH , Youk JH and Kang TJ Preparation of antimicrobial poly(vinyl alcohol) nanofibers containing silver nanoparticles. J Polym Sci Part B: Polym Phys 2006; 44: 2468-2474.

39.

Zeng J. , Aigner A. , Czubayko F. , Kissel T. , Wendorff JH and Greiner A. Poly(vinyl alcohol) nanofibers by electrospinning as a protein delivery system and the retardation of enzyme release by additional polymer coatings . Biomacromolecules 2005; 6: 1484-1488.

40.

Spasova M. , Manolova N. , Naydenov M. , Kuzmanova J. and Rashkov I. Electrospun biohybrid materials for plant biocontrol containing chitosan and Trichoderma Viride spores. J Bioactive Compat Polym 2011; 26: 48-55.

41.

Stoilova O. , Manolova N. , Gabrovska K. , Marinov I. , Godjevargova T. , Mita DG and Rashkov I. Electrospun polyacrylonitrile nanofibrous membranes tailored for acetylcholinesterase immobilization. Compatible Polym 2010; 25: 40-57.

42.

Wang X. , Fang D. , Yoon K. , Hsiao BS and Chu B. High performance ultrafiltration composite membranes based on poly(vinyl alcohol) hydrogel coating on crosslinked nanofibrous poly(vinyl alcohol) scaffold . J Membr Sci 2006; 278: 261-268.

43.

Wang X. , Chen X. , Yoon K. , Fang D. , Hsiao BS and Chu B. High flux filtration medium based on nanofibrous substrate with hydrophilic nanocomposite coating. Environ Sci Technol 2005; 39: 7684-7691.

44.

Astm. Standard test method for tensile properties of plastics by use of microtensile specimens, ASTM D1708. West Conshohocken, PA: ASTM, 1993.

45.

Astm. Standard test methods for tensile properties of thin plastic sheeting, ASTM D 882. West Conshohocken, PA: ASTM, 1991.

46.

ISO. Textiles. Test methods for nonwovens. Part 2: Determination of thickness, EN ISO 9073-2. Geneva : Switzerland: ISO, 1995.

47.

Maniglio D. , Bonani W. , Bortoluzzi G. , Servoli E. , Motta A. and Migliaresi C. Electrodeposition of silk fibroin on metal substrates. J Bioactive Compat Polym 2010; 25: 441-454.

48.

Deitzel JM , Kleinmeyer J. , Harris D. and Beck Tan NC The effect of processing variables on the morphology of electrospun nanofibers and textiles. Polymer 2001; 42: 261-272.

49.

Tan SH , Inai R. , Kotaki M. and Ramakrishna S. Systematic parameter study for ultra-fine fiber fabrication via electrospinning process. Polymer 2005; 46: 6128-6134.

50.

Puppi, D. , Detta, N. , Piras, A.M. , Chiellini, F. , Clarke, D.A. , Reilly, G.C. et al. Development of electrospun three-arm star poly(ε-caprolactone) meshes for tissue engineering application, Macromol Biosci 2010; 10: 887-897.

51.

Gupta P. , Elkins C. , Long TE and Wilkes GL Electrospinning of linear homopolymers of poly(methyl methacrylate): exploring relationships between fiber formation, viscosity, molecular weight and concentration in a good solvent. Polymer 2005; 46: 4799-4810.

52.

Geng X. , Kwon O-H. and Jang J. Electrospinning of chitosan dissolved in concentrated acetic acid solution . Biomaterials 2005; 26: 5427-5432.

53.

Demir MM , Yilgor I. , Yilgor E. and Erman B. Electrospinning of polyurethane fibers. Polymer 2002; 43: 3303-3309.

54.

Ki CS , Baek DH , Gang KD , Lee KH , Um IC and Park YH Characterization of gelatin nanofiber prepared from gelatin-formic acid solution . Polymer 2005; 46: 5094-5102.

55.

Zuo W. , Zhu M. , Yang W. , Yu H. , Chen Y. and Zhang Y. Experimental study on relationship between jet instability and formation of beaded fibers during electrospinning. Polym Eng Sci 2005; 45: 704-709.

56.

Lee KH , Kim HY , Bang HJ , Jung YH and Lee SG The change of bead morphology formed on electrospun polystyrene fibers . Polymer 2003; 44: 4029-4034.

57.

Moroni L. , Licht R. , de Boer J. , de Wijn JR and van Blitterswijk CA Fiber diameter and texture of electrospun PEOT/PBT scaffolds influence human mesenchymal stem cell proliferation and morphology, and the release of incorporated compounds. Biomaterials 2006 ; 27: 4911-4922.

58.

Megelski S. , Stephens JS , Chase DB and Rabolt JF Micro- and nanostructured surface morphology on electrospun polymer fibers. Macromolecules 2002; 35: 8456-8466.

59.

Lee JS , Choi KH , Ghim HD , Kim SS , Chun DH , Kim HY , et al. Role of molecular weight of atactic poly(vinyl alcohol) (PVA) in the structure and properties of PVA nanofabric prepared by electrospinning . J Appl Polym Sci 2004; 93: 1638-1646.

60.

Du J. , Shintay S. and Zhang X. Diameter control of electrospun polyacrylonitrile/iron acetylacetonate ultrafine nanofibers. J Polym Sci Part B: Polym Phys 2008; 46: 1611-1618.

61.

Shin YM , Hohman MM , Brenner MP and Rutledge GC Experimental characterization of electrospinning: the electrically forced jet and instabilities. Polymer, 2001 ; 42: 09955-09967.

62.

Ding B. , Kim H-Y. , Lee S-C. , Shao C-L. , Lee D-R. , Park S-J. , et al. Preparation and characterization of a nanoscale poly(vinyl alcohol) fiber aggregate produced by an electrospinning method. J Polym Sci Part B: Polym Phys 2002; 40: 1261-1268.

63.

Chew SY , Hufnagel TC , Lim CT and Leong KW Mechanical properties of single electrospun drug-encapsulated nanofibres . Nanotechnology 2006; 17: 3880-3891.

64.

Yeom C-K. and Lee K-H. Pervaporation separation of water-acetic acid mixtures through poly(vinyl alcohol) membranes crosslinked with glutaraldehyde. J Membr Sci 1996; 109: 257-265.

65.

Rhim JW , Yeom C-K. and Kim S-W. Modification of poly(vinyl alcohol) membranes using sulfur-succinic acid and its application to pervaporation separation of water-alcohol mixtures . J Appl Polym Sci 1998; 68: 1717-1723.

66.

Durmaz-Hilmioglu N. , Yildirim AE , Sakaoglu AS and Tulbentci S. Acetic acid dehydration by pervaporation. Chem Eng Process 2001; 40: 263-267.

67.

Yu J. , Lee CH and Hong WH Performances of crosslinked asymmetric poly(vinyl alcohol) membranes for isopropanol dehydration by pervaporation. Chem Eng Process 2002; 41: 693-698.

68.

Andrade G. , Barbosa-Stancioli E. , Mansur A. , Vasconcelos W. and Mansur H. Small-angle X-ray scattering and FTIR characterization of nanostructured poly(vinyl alcohol)/silicate hybrids for immunoassay applications. J Mater Sci 2008; 43: 450-463.

69.

Krumova M. , López D. , Benavente R. , Mijangos C. and Pereña JM Effect of crosslinking on the mechanical and thermal properties of poly(vinyl alcohol). Polymer 2000; 41: 9265-9272.

70.

Zhang H. and Chen Z. Fabrication and characterization of electrospun PLGA/MWNTs/ hydroxyapatite biocomposite scaffolds for bone tissue engineering. J Bioactive Compat Polym 2010; 25: 241-259.