Determination of Crystallinity and Crystal Structure of Hylamer™ Polyethylene after in vivo Wear

Abstract

Hylamer™ polyethylene is a crystalline form of polyethylene of 70% crystallinity whereas conventional polyethylene (PE) has 50% crystallinity. Crystallinity is the percentage by weight of the crystalline phase present in the whole polymer, which comprises both amorphous and crystalline phases.

Clinical experience has shown that Hylamer™ components used in joint prostheses, if sterilized by gamma rays in the presence of oxygen, are easily affected by wear, which leads to osteolysis. The authors have analyzed the crystallinity of polyethylene liners removed from seven patients who had received Hylamer™ polyethylene implants sterilized by gamma rays in air and had suffered prosthetic loosening, using Raman spectroscopy coupled with partial least squares (PLS) analysis. The results have been compared to those of two controls who had received Hylamer™ polyethylene implants sterilized by gamma irradiation in a nitrogen atmosphere. The crystal structure of wear particles released into the tissues from the Hylamer™ liners sterilized by gamma rays in air is also studied. The materials undergoing two different types of sterilization methods show different crystallinity values (71.50 vs. 69.43), but the crystallinity do not change according to wear (worn and unworn liner region). Both monoclinic and orthorhombic phases are present in the liner, while in wear debris prevalently monoclinic crystals are found in both types of sterilized liners. Different crystallinity rates can explain different wear rates observed in vivo.

Keywords

crystallinity polyethylene wear Hylamer™Raman spectroscopy

Get full access to this article

View all access options for this article.

References

Li, S. and Burstein, A. H. (1994). Ultra-high Molecular Weight Polyethylene. The Material and its use in Total Joint Implants , J. Bone Joint Surg. Am., 76(7): 1080-1090 .

Collier, J. P. , Sutula, L. C. , Currier, B. H. , Currier, J. H. , Wooding, R. E. , Williams, I. R. , Farber, K. B. and Mayor, M. B. (1996). Overview of Polyethylene as a Bearing Material: Comparison of Sterilization Methods , Clin. Orthop. Relat. Res., 333: 76-86 .

Collier, J. P. , Bargmann, L. S. , Currier, B. H. , Mayor, M. B. , Currier, J. H. and Bargmann, B. C. (1998). An Analysis of Hylamer™ and Polyethylene Bearings from Retrieved Acetabular Components , Orthopedics, 21(8): 865-867 .

McKellop, H. A. , Shen, F. W. , Yu, Y. J. , Lu, B. and Salovey, R. (1997). Transaction of the 43rd Annual Meeting, Orthopedic Research Society, San Francisco, USA, p. 94-94 .

Grood, E. S. , Shastri, R. and Hopson, C. N. (1982). Analysis of Retrieved Implants: Crystallinity Changes in Ultrahigh Molecular Weight Polyethylene , J. Biomed. Mater. Res., 16(4): 399-405 .

Rimnac, C. M. , Klein, R. W. , Betts, F. and Wright, T. M. (1994). Post-irradiation Aging of Ultra-high Molecular Weight Polyethylene , J. Bone Joint Surg. Am., 76(7): 1052-1056 .

Costa, L. , Luda, M. P. and Trossarelli, L. (1997). Ultra High Molecular Weight Polyethylene-II. Thermal- and Photo-oxidation , Polym. Degr. Stab., 58(1): 41-54 .

Costa, L. and Bracco, P. (2004). Mechanism of Crosslinking and Oxidative Degradation of UHMWPE, In: Kurtz, S. (ed.), The UHMWPE Handbook: Ultra-High Molecular Weight Polyethylene in Total Joint Replacement, Chapter 11, pp. 235-250, Academic Press, New York .

Premnath, V. , Harris, W. H. , Jasty, M. and Merrill, E. W. (1996). Gamma Sterilization of UHMWPE Articular Implants: An Analysis of the Oxidation Problem. Ultra High Molecular Weight Poly Ethylene , Biomaterials, 17(18): 1741-1753 .

10.

Taddei, P. , Tinti, A. and Fini, G. (2001). Vibrational Spectroscopy of Polymeric Biomaterials , J. Raman Spectrosc., 32(8): 619-629 .

11.

Goldman, M. , Lee, M. , Gronsky, R. and Pruitt, L. (1997). Oxidation of Ultrahigh Molecular Weight Polyethylene Characterized by Fourier Transform Infrared Spectrometry , J. Biomed. Mater. Res., 37(1): 43-50 .

12.

Stea, S. , Antonietti, B. , Baruffaldi, F. , Visentin, M. , Bordini, B. , Sudanese, A. and Toni, A. (2004). Behaviour of Hylamer™ Polyethylene in Total Hip Replacement: Comparison between Two Gamma Sterilization Techniques , International Orthopaedics (in press).

13.

Visentin, M. , Stea, S. , Squarzoni, S. , Antonietti, B. , Reggiani, M. and Toni, A. (2004). A New Method for Isolation of Polyethylene Wear Debris from Tissue and Synovial Fluid , Biomaterials, 25(24): 5531-5537 .

14.

Bertoluzza, A. , Fagnano, C. , Rossi, M. , Tinti, A. and Cacciari, G. L. (2000). Micro-Raman Spectroscopy for the Crystallinity Characterization of UHMWPE Hip Cups Run on Joint Simulators , J. Mol. Struct., 521(1-3): 89-95 .

15.

Painter, P. C. , Coleman, M. M. and Koenig, J. L. (1982). The Theory of Vibrational Spectroscopy and its Application to Polymeric Materials, Wiley-Interscience, New York .

16.

Luu, D. V. , Cambon, L. and Lapeyre, C. (1980). Caractérisation des phases dans le polyéthyle`ne par effet Raman , J. Raman Spectrosc., 9(3): 172-175 .

17.

Everall, N. , Chalmers, J. M. , Ferwerda, R. , Van Der Maas, J. H. and Hendra, P. J. (1994). Measurement of Poly(aryl ether ether ketone) Crystallinity in Isotropic and Uniaxial Samples using Fourier-transform Raman-spectroscopy -A Comparison of Univariate and Partial Least-squares Calibrations , J. Raman Spectrosc., 25(1): 43-51 .

18.

Williams, K. P. J. and Everall, N. J. (1995). Use of Micro Raman Spectroscopy for the Quantitative Determination of Polyethylene Density using Partial Least-squares Calibration , J. Raman Spectrosc., 26(6): 427-433 .

19.

Affatato, S. , Bersaglia, G. , Emiliani, D. , Fortran, I. , Taddei, P. , Reggiani, M. , Ferrieri, P. and Toni, A. (2003). The Performance of Gamma- and EtO-sterilised UHMWPE Acetabular Cups Tested under Severe Simulator Conditions. Part 2: Wear Particle Characteristics with Isolation Protocols , Biomaterials, 24(22): 4045-4055 .

20.

Kuralec, L. , Rastogi, L. , Meier, R. J. and Lemstra, P. J. (2000). Chain Mobility in Polymer Systems: On the Borderline between Solid and Melt. Phase Transformations in Nascent Ultrahigh Molecular Weight Polyethylene Reactor Powder at Elevated Pressure as Revealed by in situ Raman Spectroscopy , Macromolecules, 33(15): 5593-5601 .

21.

Daly, B. M. and Yin, J. (1998). Subsurface Oxidation of Polyethylene , J. Biomed. Mat. Res., 42(4): 523-529 .

22.

Chenery, D. H. (1997). Detection of Peroxy Species in Ultra-high-Molecular-weight Polyethylene by Raman Spectroscopy , Biomaterials, 18(5): 415-419 .

23.

Kurtz, S. M. , Rimnac, C. M. , Hozack, W. J. , Turner, J. , Marcolongo, M. , Goldberg, V. M. , Kray, M. J. and Edidin, A. A. (2005). In Vivo Degradation of Polyethylene Liners After Gamma Sterilization in Air , J. Bone Joint Surg. Am., 87(4): 815-823 .

24.

Jerosch, J. , Fuchs, S. and Schmidt, T. (1998). Is Hylamer™ Adequate for use in Alloarthroplasties ? Arch. Orthop. Trauma Surg., 117(1-2): 79-83 .